CIPDB › China Industry › Industrial Equipment & Components › Valve
Durable ANSI/ISO Wcb CF8 CF8m Flat Bottom Dumping Valve1
ValveDumping ValveDischarge Valve
HENAN QUANSHUN FLOW CONTROL SCIENCE & TECHNOLOGY CO., LTD.
Preview:
Product DescriptionTank Bottom ValveTank Bottom Valve (referred to as Tank valve, Angle bottom valve, Bottom drain valve, Flush mount valve etc) are designed to provide drainage and dead space free shutoff for reactors, vessels, autoclaves and storage tanks. The dead space free shutoff is accomplished by placing the valve seat flush with the bottom of the vessel. This eliminates any buildup of product within the vessel nozzle itself. SpecificationBenefits1. Both Y type and angle type discharge valve can be designed according to your pipe installation2. Both flat bottom type and pipe connection type tank bottom valve can be designed3.Both rising disc type (the valve is opened into tank) and lowering disc type (the valve is opened into valve) can be designed4.Short stroke for open/close operation5. Reduce maintenance cost due to longer life time. 6. The sealing surface of the valve seat and the valve disc is made of over laying cemented carbide or painted with tungsten carbide. The auxiliary line sealing guarantee the reliability of the sealing performance. 7. Preventing the medium from blockingTechnical Specifications(Custom configurations available upon request.)Size2"~14" DN50~DN350PressureClass 150~Class 600 PN1.0~PN16Body materialWCB, CF8, CF8M, CF3, CF3M LCB etcConnection TypeFlange, weld etcDriving methodManual, pneumaticDrawings & Dimensions Our engineering team can provide tailored designs to meet specific project requirements.Company ProfileFAQQ: What is the cause of the leakage at the stem extension?A: There are two reasons, one is the sealing ring damage; Second, the sealing ring wear, aging.Q: How to solve the leakage at the stem extension?A: The solution is to replace the sealing ring.Q: What causes leakage at the valve and pipe connection?A: First, the sealing surface is damaged or contaminated by dirt; Second, gasket failure; Third, the pipe flange pressure is uneven or not pressed.Q: How to deal with leakage at the connection of valve and pipeline?A: The following measures can be taken: repair the sealing surface or clean up the dirt; Replace the gasket; Press the flange bolt evenly.Q: What is the cause of leakage in the valve?A: There is mainly debris on the sealing surface, or the sealing surface is damaged.Q: How to deal with internal leakage of valve?A: Remove the debris on the sealing surface and repair or replace the sealing pair.Q: What is the problem caused by the inflexibility of valve opening and closing?A: First, the executive mechanism failure; Second, there are foreign objects blocked valve plate.Q: How to solve the valve opening and closing is not flexible?A: When the actuator fails, repair or replace the actuator; If foreign objects block, remove foreign objects, and be careful not to damage the sealing surface.Q: Can the valve actuator adjust itself?A: The valve actuator has been debutted before leaving the factory, and non-professional personnel are forbidden to adjust.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...