CIPDB › China Industry › Industrial Equipment & Components › Environment Protection Device
China, Chinese Energy-Saving Qxb Type Submersible Centrifugal Aerator for Sewage Treatment/Water Treatment/ Water Oxygenation for Industry, Irrigation, Poultry Equipment1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Environment Protection DeviceIrrigationPoultry EquipmentCentrifuga AeratorPoultry Equipment Aerator
Qingdao Zero Pure Environmental Protection Co., Ltd
Preview:
Product Description If you have any questions, please contact us!Product DescriptionThe QXB submersible aerator is used in aeration pond and aeration sedimentation pond of sewage treatment plant to aerate and mix the mixture of sewage and sludge, and perform biochemical treatment of sewage or aeration in aquaculture ponds. The intake air volume is 10~320m3/h, the oxygen increase capacity is 0.37-24kg02/h, the motor power is 0.75-22kW.Product details: Scope of applicationQXB centrifugal submersible aerator is used in the aeration tank and aeration grit chamber of sewage treatment plant for oxygenation and mixing of mixed liquor of sewage and sludge, biochemical treatment of sewage or oxygenation of pond.Product features1. High oxygen dissolution rate, large proportion of tiny bubbles, high oxygen charging efficiency and wide oxygen charging area;2. There is no dead zone in the pool, and the horizontal aeration air with bubbles can completely scour every corner of the pool bottom;3. Simple and compact structure, long service life of the unit, bearing bearing with large load, shaft seal with oil bath and air suction in impeller chamber to prevent water from contacting with sealing elements during operation, all of which ensure continuous operation of the aerator in 24 hours and long-term trouble-free operation;4. Save project investment, no air source, no blower, easy installation and low noise;Working conditions1.Medium Temperature ≤ 40oC2.Liquid Density ≤ 1150kg/m33.PH: 5-9Introduction to structure A submersible aerator consists of: submersible electric pump, mixing plate, base, air intake pipe and impeller.The upper end of the intake pipe is the air intake, located above the water surface, the lower end is connected to the mixing plate, after the power supply is turned on due to the impeller rotation, the high-speed water flows out of the impeller outlet, the negative pressure is formed by the mixing plate, thus the air is sucked in and mixed with the sewage, and the mixture flows out of the outlet, completing the oxygenation of the sewage. Product ParametersProduct displayCompany Profile
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...