CIPDB › China Industry › Industrial Equipment & Components › Other Equipment & Components
HDD Hydraulic Breakout Tong Manual Tong for Casting Drilling Tool in Stock1
Other Equipment ComponentsHDD Hydraulic TongBreakout Tong
Dongying Lake Petroleum Technology Co., Ltd.
Preview:
Product Description HDD Hydraulic Breakout Tong Manual Tong for Casting Drilling Tool in Stock Product DescriptionThis is practical new type of breakout tong, is an accessory equipment used in the directional crossing underground construction site. It includes hydro system and tong frame. The frame consists of mobile bar and (No 2 in the fig) and static bar (No. 1) which is paralleled with the mobile bar. There is a bracket in the end of the mobile bar, so the end of the static bar. There are also two bolts (No. 5) between mobile and static bars, through which the hydro cylinder is connected with static and mobile bars as a whole. The movable and static bars are both adopted with upper and lower clamps (No. 6) structure to adjust the dimension of the pipes outside diameter which is clamped. The suitable range of the outside diameter adjusted is Φ50-Φ89mm.Operating steps: 1. suitable range: pipe Outside diameter: Φ50-Φ300mm.2. Install the movable and static bars at the two sides of the screw (near the No. 6) respectively. Ensure the movable, static bars and hydra cylinder in the same straight line. 3. Connect the hydro cylinder to the hydro cylinder. 4. Inject hydro oil through injector, and make the cylinder piston to act in a straight line and let the movable and static bars relatively rotate by which realize the breakout. (Note: to restore the cylinder through discharging the injector) To complete the act of breakout through the relative rotation of the static and movable bars will largely decrease the working strength of the operators and enhance the working efficiency, suitable for the drill equipment which rely on screw connection and not easy to break out due to tightened force created by the large torque and long-term operation. lt's flexible and safe and reliable in this area. Detailed PhotosProduct Parameters1. Full hydraulic vehicle-mounted break-out shackle chain winch. Consist: 2set Chain winch. Oil cylinder: 3pcs Electric power station: 1 set Technical parameters: Handle size: 60mm- 300mm Break-out torque: 50-200kN.M Tighten Torque: 40-150kN.M 2. Full hydraulic vehicle-mounted break-out shackle chain winch. Consist: 2set Chain winch. Oil cylinder: 3pcs Electric power station: 1 set Technical parameters: Handle size: 60mm- 300mm Break-out torque: 50-200kN.M Tighten Torque: 40-150kN.M 3. Manual Hydraulic breakout tongs Consist: 2sets Chain Winch(Chain=16 links) Manual hydraulic pump: 1 set Hydraulic Oil Cylinder: 1set Technical requirement: Handle size: 60mm- 200mm(If you want to handle big / small size, you can add/delete chain) Break-out/Make-up torque: 100kN.M 4. Electric hydraulic Breakout tong Consist: 2sets Chain Winch(Chain=16 links) Electric hydraulic pump: 1 set Hydraulic Oil Cylinder: 1set Technical requirement: Handle size: 60mm- 300mm(If you want to handle big / small size, you can add/delete chain) Break-out/Make-up torque: 150kN.MOur ServicesFAQ How can I place order? A: You can contact us by email about your order details, or place order on line. How can I pay you? A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), L/C, D/P, Western Union are the most usual ways we are using. If you want to use other way, please tell me, we can discuss.What's the order procedure? A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr-epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. How do you take care when your clients received defective products? A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...