CIPDB › China Industry › Industrial Equipment & Components › Mass Transfer and Separation Equipment

Natural Gas Filter Separator Removes Particulate Matter and Moisture. Natural Gas Filter¹

Preview:

Product Description Product DescriptionThe natural gas filter separator is a key equipment in natural gas processing and transportation systems, mainly used to remove solid particles (such as dust, rust residue), liquid water, hydrocarbon condensates, and other impurities from natural gas, ensuring the safe operation of downstream equipment (such as compressors, measuring instruments, pipelines, etc.) while meeting environmental and gas quality requirements.Working principle 1: Natural gas first enters the filter through the inlet, and the gas first collides with the support tube that supports the filter element (to avoid direct impact of airflow on the filter element, causing premature damage to the filter material). Larger solid-liquid particles are initially separated and settle to the bottom of the container under the action of gravity. Then the gas passes through the filter and coalescence filter element from the outside to the inside, solid particles are intercepted by the filter medium, and liquid particles gradually coalesce and grow on the inner surface of the filter element due to the coalescence function of the filter medium. Larger liquid droplets are separated by gravity settling;Working principle 2: In addition, a separation element is installed in the discharge chamber, which can effectively capture liquid droplets to prevent the outlet droplets from being carried, further improving the separation effect. The clean gas behind flows out of the filter separator. As the amount of gas passing through increases, particles deposited on the filter element will bow to the increase in pressure difference of the ignition filter. When the pressure difference rises to the specified value, it indicates that the filter element has been clogged and should be replaced in a timely manner.Product ParametersparameterTypical scope/descriptionDesign pressure1.0~20 MPa (based on pipeline pressure design, commonly 4~10 MPa)Design Temperature-30oC~120oC (considering natural gas temperature and ambient temperature)Processing gas volume100~500000 Nm 3/h (depending on pipeline flow rate)Filtration0.1-50 microns (liquid and solid particles, depending on filter type)separation efficiency≥ 99.9% (for particles with a diameter ≥ 1 micron)pressure drop≤ 0.05~0.3 MPa (new filter element status, needs to be monitored regularly)materialShell: Carbon steel (such as Q345R), stainless steel (SS316L); Internal components: stainless steel, polyester fiber, etcinterface sizeDN50~DN1200 (matched according to pipeline diameter)Discharge methodManual or automatic sewage discharge (with liquid level sensor control)Adapt filter elementSP1.0 separator filter cartridgeSP1.0 elements are high-efficiency filter separator elements with molded fiberglass tubes made from gradedfiberglass. The filter element removes particles as small as 1 micron without excessive differential pressure.SP2.0 separator filter cartridgeSP 2.0 separator elements are effective in treating process water from a huge range of liquids, and can also beutilized for industrial use without requiring APl authentication. Separator elements greatly improve productionefficiency and minimize the equipment's operating costs.CLL1.0 coalescer filter cartridge(liquid from liquid)CLL 1.0 coalescing filter elements are widely used in liguid/liguid separations in the chemical, flavor & fragranceand biotech industries. lts coalescing medium contains a tapered layer-pore structure.CLG1.0 coalescer filter cartridge(liquid from gas)CLG1.0 series elements are designed to condense very fine liquid particles (droplets mainly composed of water, oil.and hvdrocarbons) in natural gas, The filter element filters solid particles and liguid mist more efficiently.

× More Keyword ..

× More Menu ..

×

Manufacturing & Processing Machinery

×

Industrial Equipment & Components

×

Tools & Hardware Products