CIPDB › China Industry › Industrial Equipment & Components › Universal Hardware Parts
Piezoelectric Pressure Sensor Pzt Material Ultrasonic Ceramic Tube/Rings/Disk1
Universal Hardware PartsPiezo CeramicCeramic Disc
Beijing Oksultrasonic Group Co., Ltd
Preview:
Product Description Ceramics that can use electrical and magnetic properties in the electronics industry are called electronic ceramics. Electronic ceramics finally obtain ceramics with new functions through precise control of the surface, grain boundaries and size structure. It can be widely used in energy, household appliances, automobiles, etc.Electronic ceramic substrate materials In electronic ceramics, insulators occupy the most important position. In particular, the insulating substrate or packaging material for advanced integrated circuits can be a high-purity dense alumina sintered body with a dimensional accuracy of micrometers or less. High-purity dense alumina has insulating properties that metal materials do not have, and thermal conductivity that polymer materials do not.Ceramic Piezoelectric Materials Piezoelectric elements can convert electrical and mechanical signals. Piezoelectric ceramic elements of a certain shape are mainly made by sintering PbTiO3-PbZrO3 system (PZT). Even if it is a sintered body, the piezoelectricity of a single crystal can be obtained by polarization. The main uses of piezoelectric components are spark plugs and resonators. The resonator acts as a radio wave filter that selectively passes a specific frequency, and is an indispensable component of a tuning circuit such as television (TV) and radio.Ceramic semiconductor materials There are many semiconductors in ceramics. The property of resistance changing with temperature can be used for nonlinear resistance. Negative temperature coefficient non-linear resistors (NTC non-linear resistors) decrease in resistance with increasing temperature, and have general semiconductor characteristics. Iron-based metal oxide ceramics are chemically and thermally stable, so they can be used in non-linear resistors to control temperature in a wide range. In contrast to this, the component called a positive temperature coefficient thermistor (PTC thermistor) uses semiconductorized BaTiO3 ceramics. This kind of ceramic has a sharp increase in resistance at the phase transition temperature. If it is used as a resistance heating element, it can automatically control the temperature around the phase transition temperature, which is very convenient.When voltage is applied to piezoelectric ceramics, mechanical deformation will occur with changes in voltage and frequency. On the other hand, when the piezoelectric ceramic is vibrated, an electric charge is generated. Using this principle, when an electrical signal is applied to a vibrator composed of two piezoelectric ceramics or a piezoelectric ceramic and a metal sheet, so-called bimorph element, ultrasonic waves will be emitted due to bending vibration. On the contrary, when ultrasonic vibration is applied to the piezoelectric bimorph element, an electrical signal is generated. Based on the above effects, piezoelectric ceramics can be used as ultrasonic sensors.Piezoelectric ceramic wafer is a simple and lightweight electrical device. It is widely used because of its high sensitivity, no magnetic field spreading, no copper wire and magnet, low cost, low power consumption, and easy mass production. Suitable for the transmission and reception of ultrasonic and infrasonic waves, a relatively large area of piezoelectric ceramics can also be used to detect pressure and vibration. The working principle is to use the reversibility of the piezoelectric effect to apply audio voltage on it to emit sound.Piezoelectric ceramics are functional ceramic materials that can mutually convert mechanical energy and electrical energy, and belong to inorganic non-metallic materials. At the same time, it has positive and negative piezoelectric effects. Piezo Ceramic For Tooth-CleaningSpecificationDimension(mm)Radial Frequency(fs)Capacitance(pF)Electromechanical coupling coefficient(Kr)Piezoelectric voltage coefficient( d33)Dielectricdissipation factor(tanδ)OKS-PCTC1052Φ10×Φ5×2145KHz±5%330 ±12.5%0.54260≤0.6OKS-PCTC1051Φ10×Φ5×2150KHz±5%310±12.5%0.31200≤0.3FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERS SpecificationDimension(mm)Radial frequency(KHz)Capacitance(±12.5%)pFDielectric dissipation factortanδ(%)Impedance(Ω)KrMechanicalquality factor (Qm)OKS-PD3030Φ30×3.066.72730≤0.3≤15≥0.55500OKS-PD3530Φ35×3.063.03100≤0.3≤15≥0.55500OKS-PD3865Φ38×6.559.91580≤0.3≤15≥0.55500OKS-PD4530Φ45×3.050.05100≤0.3≤15≥0.55500OKS-PD4535Φ45×3.550.04700≤0.3≤15≥0.55500OKS-PD5030Φ50×3.046.05800≤0.3≤15≥0.55500OKS-PD5035Φ50×3.546.06300≤0.3≤15≥0.55500OKS-PD5050Φ50×5.046.04150≤0.3≤15≥0.55500FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERSRing Piezoelectric Ceramic (PZT-4 and pzt-8)SpecificationDimension(mm)Radial frequency(KHz)Capacitance(pf)Dielectric dissipation factortanδ(%)Electromechanical coupling coefficient(Kr)ImpedanceZr(Ω)Thickness frequency(KHz))Mechanicalquality factor (Qm)OKS-PR-25103Φ25×Φ10×366.41240±12.5%≤0.3≥0.46≤15683±5%800OKS-PR-225104Φ25×Φ10×466.4930±12.5%≤0.3≥0.46≤15512±5%800OKS-PR-40155Φ40×Φ12×545.92070±12.5%≤0.3≥0.46≤15410±5%800OKS-PR-40155Φ40×Φ15×542.21960±12.5%≤0.3≥0.46≤15323±5%500OKS-PR-40176Φ40×Φ17×640.51555±12.5%≤0.3≥0.46≤15341±5%800OKS-PR-40205Φ40×Φ20×537.91700±12.5%≤0.3≥0.47≤15410±5%800OKS-PR-50205Φ50×Φ20×533.22490±12.5%≤0.3≥0.46≤15341±5%500OKS-PR-50206Φ50×Φ20×633.22490±12.5%≤0.3≥0.46≤15341±5%500OKS-PR-502065Φ50×Φ20×6.533.22490±12.5%≤0.3≥0.46≤15341±5%500OKS-PR-50175Φ50×Φ17×534.32430±12.5%≤0.3≥0.46≤15315±5%800OKS-PR-50176Φ50×Φ17×634.32430±12.5%≤0.3≥0.46≤15315±5%800OKS-PR-501765Φ50×Φ17×6.534.82430±12.5%≤0.3≥0.46≤15315±5%800OKS-PR-50236Φ50×Φ23×631.22340±12.5%≤0.3≥0.47≤15341±5%800OKS-PR-50276Φ50×Φ27×629.32100±12.5%≤0.3≥0.47≤15341±5%800OKS-PR-603010Φ60×Φ30×1025.31922±12.5%≤0.3≥0.47≤15341±5%800
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...