CIPDB › China Industry › Industrial Equipment & Components › Thread Machining Tools
6 Packs HSS-M2 ANSI Standard Material Combination Drill & Taps Bit Set1
Thread Machining ToolsCombination TapsCombination Thread Tap
JiangSu XingRui Tools Co., Ltd.
Preview:
Product Description Product DescriptionCOMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects; No more using a drill to drill the hole and then tapping it out later with another toolHIGH VERSATILITY - Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ?-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machinesHANDY TOOLS - These drill-tap bits are must have if you fabricate a lot; you can use them in aluminum, plastic, wood and other thin soft material metal panel; When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the holeEASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread1. Combination Drill & Taps Bit Set can be used to tap various threads to meet different needs - including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ?-20NC2. They are designed to drill, tap, deburr and counter holes on wood, copper, brass, aluminum, soft material metal sheet and plastic3. Equipped with 1/4inch hex quick-change shank, they can work on Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines4. They are designed to drill tap a hole through the workpiece, not suitable for drilling Blind holes (it will break the bit in drilling workpiece thick than its work range). With bench drill, they can drill 3/16" (5mm) thick maximum; with hand drill, they can drill 1/8" (3mm) thick maximum. 5. Advanced Black oxide coating technology give it rust prevention protection and classic appearanceUser Guide:Following some technique will let you save the bit:1. Thin drill bits can break easily than thick bits, so drill more carefully while using a thinner drill bit, make sure it is perfectly straight.2. Before start drilling, use some cutting oil. It will not only allow to drill hole easily but keep the drill bit from snapping off. It will also keep the drill from getting overheated and damaged. 3. Don't push with much pressure since it can damage the drill bit. 4. Slowly start drilling the intro surface and then gradually increase the speed. Drilling with high speed at starting point can cause slipping off.Product name6 Packs HSS-M2 ANSI standard material Combination Drill & Taps Bit SetFlute TypeSpiral FluteStandardANSIProcessFully groundSize4-40UNC-1/2-20UNCSurfaceBlack Finish (Tin-coated, other High Performance Coating are Available)Shank Typehex ShankPackage6Pieces in One Plastic BoxThread TypeM/MF, UNC/UNF are AvailableFeatures1.Ideal for rethreading fasteners and fastener holes for auto and machinery repair.2.Precision milled sae tap and die set for cutting raw material or repair existing threads, remove screws and more function.3.It can improve the efficiency of processing thread, a necessary tool for hand tapping operation4.The straight flute is the standard style of tap, designed for a range of different tapping applications.5.A straight flute tap can be used in through or blind holes.Product Parameters SizeOverall LenThread Len4-40UNC1.880.5635-40UNC1.940.6256-32UNC20.6888-32UNC2.130.7510-24UNC2.380.87512-24UNC2.380.8751/4-20UNC2.50.9385/16-18UNC31.1253/8-16UNC3.51.257/16-14UNC3.881.4341/2-13UNC4.251.656Our AdvantagesPackaging & Shipping1. Package:Plastic box,2. Delivery:35 Days after your deposite3. Shipping:By sea,By air,if small order,we can provide the Express.WORKSHOPCertificationsFAQQ:What is your MOQ?A:It depends on specific products.please contact us for more informationQ:What if the products arrived damaged?A:Send us the photo of damaged products to confirm,we will replace them in your next orderQ:What is your delivery terms?A:We accept EXW,FOB,etc. We will choose the most convenient one foe you with less costQ:How many markets do you have?A:Germany Dubai Russia etcQ:Can I buy a sample for testing?A:yes we accept the sample ordersQ:How can I contact with you?A:You can send us inquiry directly through ******.or you can contact through any method listed below
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...