CIPDB › China Industry › Tools & Hardware › Nail
High Quality for Framing 21 Degree Full Round Smooth Shank Ring Plastic Strip Nails1
NailRound NailPlastic Nail
Xingtai Shangda Commerce and Trade Co., Ltd
Preview:
Product Description Product DescriptionPlastic collated framing nails, also known as plastic strip nails or plastic collated framing nails, are the most economical type of framing nails. The nails are held together with plastic strip or band to prevent deterioration due to weather conditions or high humidity. The collation are angled to accommodate the overlapping heads, and the angles are available in 0°, 15°, 20°, 21°, 22° and so on. Our plastic collated nails, with smooth, ring or screw shank, are widely used in most wood applications to provide efficient operation and excellent holding power. Besides, there are stainless steel plastic collated nails for cedar or redwood to prevent staining.Bright Finish:Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.Hot Dip Galvanized (HDG):Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.Electro Galvanized (EG):Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener. Stainless Steel (SS):Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. All B&C Eagle fasteners use a minimum S304 stainless steel.Product Parameters 28°/34°Clipped(D) Head Paper Collated NailsDiameterLength mm(inch)Nails/Strip2.9 (0.113")50 to 90 (2" to 3-1/2")25/30/40/603.1 (0.120")50 to 100 (2" to 4")25/30/40/603.3 (0.131")65 to 100 (2-1/2" to 4")25/30/40/60 34°Offset Round Head Paper Collated NailsDiameterLength mm(inch)Nails/Strip2.9 (0.113")50 to 90 (2" to 3-1/2")25/30/403.1 (0.120")50 to 100 (2" to 4")25/30/403.3 (0.131")65 to 100 (2-1/2" to 4")25/30/40 17°/21°/34°Full Head Plastic Collated NailsDiameterLength mm(inch)Nails/Strip2.9 (0.114")60 to 90 (2-3/8" to 3-1/2")25/283.1 (0.120")70 to 90 (2-3/4" to 3-1/2")25/283.3 (0.130")65 to 100 (2-1/2" to 4")25/283.8 (0.148")100 to 130 (4" to 5-1/4")25/284.2 (0.165")110 to 160 (4-5/16" to 6-5/16")25/284.6 (0.181")145 to 160 (5-3/4" to 6-5/16")25/28 16°Wire CollatedFlat Top/Conical TopDiameterLength mm(inch)Nails/Strip2.1 (0.083")27 to 50 (1-1/16" to 2")350-10002.3 (0.092")38 to 60 (1-1/2" to 2-3/8")300-9002.5 (0.099")38 to 70 (1-1/2" to 2-3/4")300-30002.9 (0.113")50 to 90 (2" to 3-1/2")250-10003.1 (0.120")64 to 90 (2-1/2" to 3-1/2")225-8003.3 (0.131")64 to 90 (2-1/2" to 3-1/2")225-8003.8 (0.149")110 (4-3/8")120 16°Wire Collated RoofingDiameterLength mm(inch)Nails/Strip3.1 (0.120")19 to 45 (3/4" to 1-3/4")120High quality Steel NailPerfect for pallet, construction, upholstery, crafts, insulation, roofing felt etc.Electrogalvanized / Hot Dip Galvanizing finish help resist corrosion and rust, recommended for interior and outside use.Application: Pallet, Construction, Build Roofing, Wood Case, Timber frame erection, Roofing, stud wall partitioning.Surfacing: Bright, EG, EG12, HDG, SS304/A2, SS316/A4 etc.Shank: Smooth, Ring, Screw, Barbed etc.Detailed PhotosBright FinishBright finish have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright finish are often used for interior framing, trim and finish applications.Electro GalvanizedElectro Galvanized finish have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity.Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.Hot Dip GalvanizedHot dip galvanized finish are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Company ProfileStrength Builds Excellence, Collaboration Shapes SuccessAbout Xingtai Shangda Commerce and Trade Co., Ltd. Xingtai Shangda Commerce and Trade Co., Ltd. is a diversified enterprise group headquartered in Xingtai, a strategic economic hub within the "Capital Economic and Trade Circle" surrounding Beijing. Our core business spans premium welding consumables, arc spray wires, metallic powders, metal wires, as well as steel nails, wire nails, and nail-making machinery. In recent years, we have significantly expanded our product portfolio by introducing competitive new lines such as fuel mineral materials, steelmaking materials, and casting materials, while establishing long-term strategic partnerships with local manufacturing facilities. Guided by the principle of "Quality First, Customer Supreme," we prioritize modern management practices and have obtained ISO 9001 international quality management system certification. Our products are trusted in over 20 countries and regions globally, including the United States, Brazil, India, Russia, Bulgaria, and South Africa, where we have earned a reputation for reliability and innovation. We warmly welcome inquiries and visits from clients worldwide. Let us join hands to foster innovation, strengthen collaboration, and build a mutually beneficial future togethe Packaging & ShippingWhy choose KYA?1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.2.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.3.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time. 4.Free samples: Free samples available at any time.You can get competitive prices from us because we possess big manufacturing relationship in China.FAQFAQ:1.Q:Do you have your own production factory? A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China2.Q: Can you send us samples? A: We are pleased to send you the sample to test the quality and market. 3.Q: About your products, could you do it OEM? A: Yes, OEM service is available. 4.Q: Do you also provide spare parts of pneumatic tools? A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts. 5.Q: For the product, could you spray other color of painting? A: Yes, color can be customized. 6.Q: What's the delivery time? A: It usually takes about 20-30 working days to produce one order. 7.Q: How is the payment terms? A: Normally T/T 30% in advance and T/T 70% before shipment. 8.Q: Can I mix different models in one container? A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ. 9.Q: How does your factory do regarding quality control? A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery. 10.Q: Do you have quality certification? A: Yes, we have CE, SGS,ISO, ect.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...