CIPDB › China Industry › Instruments & Meters › Transmitter
China, Chinese High Accuracy Temperature & Humidity Transmitter, LCD Display1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
TransmitterLCD DisplayTemperature & Humidity TransmitterTemperature Measurement
Hefei Jingpu Sensor Technology Co., Ltd.
Preview:
Product Description High accuracy Temperature & Humidity Transmitter, LCD display☆ Wall mounting, 86 type shell, magnetically mounted, LCD display☆ RS485 signal output, Modbus-RTU protocol☆ Linearity responds, integrated temperature and humidity☆ Special circuit, high accuracyTechnical Information TemperatureHumidityMeasuring range-20oC~70oC0%RH~100%RHAccuracy≤±0.3oC (at 25oC)≤±5%RH (25oC, 30%RH~80%RH)Stabilization<0.1oC/year<1%RH/yearOutputRS485Power supply 9V~16V DCSensor SHT20Power consumption <240mWWorking -20oC~70oCAnti-surge voltage ±2000VStorage temperature -40oC~80oC (without condensation)Connection RJ45 connectorHousing material Engineering PlasticsParameter Set1) Normal display status: display current temperature and humidity2) Set address: in normal display status, press ''SET'' key, upper half display ''Add'', when bottom half number flicker, press ''+'' or ''-'' key to set address (defaults to 1), the range is 1~255.3) Set key: when setting, the key time interval is 10 seconds, more than 10 seconds will automatically to the normal display state.Guarantee12 month. Damage due to exceptional operating conditions, careless handling or misapplication will void the guarantee.NoticeThe mounting direction of soleplate should be attended. Avoid the following:close proximity of the transmitter to a heating element, a cold or hot wall, direct exposure to sun rays, etc.Be sure to cut off the power supply before mounting and changing transmitter.If the mounting surface with a large temperature difference between the measured environmental, recommend the use of stents installed more than 20cm away from the mounting surface.It will be necessary to calibrate the transmitter when it is using above 12 month.Some product specifications may be changes, see the indicator of product identification on the subject.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...