CIPDB › China Industry › Instruments & Meters › Other Instruments & Meters
15m Ts Gtex 10191 Enraftanksystem Tape Measure for Hermetic Utimeter Gtex1
Other Instruments Meters15m Utimeter Otex GtexUTI Tape Otex Gtex
Lanka Industrial Automation (Shanghai) Co., Ltd.
Preview:
Product Description Product DescriptionTS 10191 EnrafTanksystem SA Tape measure for electronic tape measures Hermetic UTImeter GtexCable width12.5mm~13mmCable thickness0.75mm~0.85mmRuler width10mm±0.2mmCoatingCoating material resistance to chemical and acidSpecification15MColorwhitespecial characteristicsCoating material resistance to chemical and acid.High temperature resistanceTank Gauging Tape MMC UTI Flexi Dip D 2401-2Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.SPECIFICATIONSAccuracyof Tape: +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).of Temperature Display: +/- 0.5° F (+/- 0.2° C) +/- 1 digit error.of Calibration Range: 32° F (0° C) to 176° F (88° C).of Probe: For dryness to within 3/8 inch (10mm) of bottom.Ambient Temperature LimitsLCD: same as above.Sensor: same as above.Application:Open gauging ("O" type) (Safe product vapors only).Restricted gauging ("R" type) via MMC vapor-control valve.Battery: 9-Volt .Operation: U-Ullage, I-Interface (oil/water), T-Temperature. Coating material resistance to chemical and acid.High temperature resistanceUTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration. MMC's UTI gauging tapes are capable of detecting all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly. When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates. When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED starts flashing.UTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration. What is Ullage Temperature Interface (UTI)?The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.Note: It is very important that the Ullage Temperature Interface system is grounded to the tank before the probe is introduced into the tank and remains grounded until after complete withdrawal from the tank.How does Ullage Temperature Interface (UTI) work?In the following paragraphs, we will introduce how the ullage, temperature and oil-water interface are detected onboard:Temperature DetectionThe sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.Interface DetectionThe operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.ULLAGE TEMPERATURE INTERFACE DETECTOR is necessary for cargo tanker and it is designed for measuring the ullage level, the oil-water interface level, the temperature sampling the cargo.hermetic GTEX RTEX OTEX uti tapeGT3 MK3 UTI meterMMC uti tape d-2401-2TANKTECH uti tapp meter T2000-TFC-02 T2000-TFC-01MARSEN uti tapeApplicationSuitable for ULLAGE INTERFACE TEMPERATURE DETECTORPackaging & Shipping
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...