CIPDB › China Industry › Instruments & Meters › Electronic Instrument
China, Chinese Portable Low Medium Voltage Underground Cable Fault Locator 32kv High Voltage Surge Generator1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Electronic InstrumentCable Fault TesterCable Fault Location System
Xian XZH Electric Power Technology Co., Ltd.
Preview:
Product Description Product DescriptionDescriptionThe XHHV535-4TS high voltage pulse generator can be used impulse discharge and withstand voltage test in low and high voltage cable fault test. High-precision test cable fault sampling waveform module and small transformer are installed inside, which can truly achieve the effect of not being damaged by impact, and it also has the functions of automatic timing impact, manual impact and withstand voltage test.Panel introduction1. Ammeter: Indicates the size of the current.2. Voltmeter (Voltmeter): high-voltage output voltage indicating kV meter, divided into 8kV, 16kV, 32kV combined with voltage level switch readings.3. High-voltage lamp (HV): On means there is high-voltage output, and off means there is no high-voltage output.4. Power light: When the power switch is turned on, the indicator light lights up.5. Zero light (Zero): Indicates that the voltage regulating knob is in the zero position. Only when the zero light is on can the high voltage be started.6. Overcurrent protection switch: When pressed, it indicates that the overcurrent protection function has started; when it pops up, it indicates that the instrument has triggered the overcurrent protection.7. Power Switch: Turn clockwise to turn on the system power supply, turn counterclockwise to turn off the system power supply.8. Single key (Single): This key is effective when the mode selection key is in the Single function.9. Mode select: divided into three modes: voltage resistance (DC), single (Single), and cycle (Cycle). DC is the voltage withstand function. When this function is selected, the cable will be tested for voltage resistance at this time; Single is the manual function. When this function is selected, the voltage will increase after the high voltage starts. Press the Single key to manually trigger the impact discharge; Cycle is an automatic function. When this function is selected, the high voltage is started to boost the voltage. The instrument will automatically trigger impulse discharge for about 7 seconds.10. Start button: In the zero position, press the start button. At this time, the high voltage starts and the high voltage light turns on. In the non-zero state, the starting high-pressure light does not light up.11. Voltage control: When this knob is in the zero position, the zero light is on and the high voltage can be started. Only after the high voltage is started can the voltage be boosted through the voltage regulating knob.12. Stop key: When the test is completed or an abnormality occurs, press this key to cut off the high-voltage output. At this time, the remaining high voltage under test will also be automatically discharged.13. Voltage rotation mode (Voltage select): This button has three voltage level modes, 8kV, 16kV, and 32kV. Please rotate it to the appropriate position before turning on the machine. Lift, turn, press.Technical parameters High voltage surge generator XHHV535-4TSSurge voltage levels and adjustmentrangesLevel 1 : 0-8KVLevel 2: 0-16KVLevel 3: 0-32KVSurge voltage levels switchManualVoltage adjustment typeContinuousIndicationHigh-voltage side voltage metering, indication of output voltage and current in real timeSurge energy at each levelUp to 2048JOperating modeSingle trigger, cycle, DCOperating modes switchManualImpact timeabout 7 seconds for automatic impact, arbitrary control time for manual impactImpact power2KVAContinuous output current60mABuilt-in capacitor4μF/32kV, 16μF/16kV, 64μF/8kV three-speed adjustmentSafe operationWith zero start protection function, safe and reliableDischargeUnique high-voltage measurement design, in the stop state, it will automatically discharge the internal capacitance of the deviceWorking powerAC 220V±10% 50Hz±2Hz (other voltage and frequency can be customized)DC withstand voltage testingOutput voltage adjustment andindication range 0-32KV, Output current indication range 0-20ABurn currentFault conditioning (burning) with current up to60 mA @ 32 kV, 120 mA @ 16kV, 240mA@8kV. Connecting cableHigh voltage output cable: 5m, Protective earthing cable:5m,power cord 2.5m. Cables can be customized according to customer requirements.SafetyOver-voltage, Over-current, Overheating protection.Automatic discharge after operation.Protection ratingNot lower than IP54Working powerAC 220V±15%, 50Hz±2HzDimensions(mm)534L×444W×805HTotal weightAbout 120kgPacking ListOnsite testing case
Purchasing Request
Note: Send your purchase request, and we will screen suppliers or manufacturers for you free of charge...