CIPDB › China Industry › Chemicals › Fiberglass Products
Flexible Metal Corner Tape/Plastering Corners Metal Corner Tape 50mm*30m1
Fiberglass ProductsMetal Corner TapePaper Tape
New Alpha Building Materials (Shandong) Co., Ltd.
Preview:
Product Description Drywall joint Paper TapeApplication:Drywall Joint Paper Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering. Joint tape is super strong both wet and dry. The tapered edges offer invisible seams. Joint tape is sparked, making it the type preferred by professionals.Specification:50mmX23m, 50mmX75m, 50mmX150m. etc.Other specification upon customer's request.How to Finish Wallboard Joints:1. Firmly press joint compound into wallboard joints over an approximate 4" wide area.2. Center Joint Paper Tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess.3. Make sure nail heads are driven in at least 1/32". Apply joint compound to nail head indentations.4. After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3"- 4" width on each side. Apply second coat to nail heads.5. Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8" on each side. Apply final coat to nail heads.6. When completely dry, at least 24 hours after final coat, sand smooth.Finishing Inside Corners: Apply compound to both sides of corner. Crease tape and embed. Apply a thin coat on both sides of tape. When dry, apply a second coat to one side only. Let dry, then finish the other side. When dry, sand until smooth.Finishing Outside Corners: Use broad knife to apply the joint compound over the corner bead flange for the outside corners. The first coat should be approximately 6" wide, and the second coat 6"- 10" wide applied on each side of corner.Caution:Apply Joint PaperTape only at the recommended temperatures of the joint cement used. Store tape in closed cartons at normal room temperature in an enclosed, dry shelter.Architectural Specifications: Meets ASTM #C475. Product Description Properties1.Gypsum board (gypsum board) partition wall is resistant to dynamic effects thanks to its flexibility.2. Installation is easy. The pH value is the same as the human body. It does not produce bacteria. It is economical.3. Gypsum board (gypsum board) partition falling to m2 on the wall 35 kg / m24. The load per m2 on the brick wall is 300 kg / m25. Quick and easy assembly - thanks to disassembly, saves labor and time.6. Gypsum board (gypsum board) partition wall does not lead to loss of space in the structure.7. Gypsum board (gypsum board) in buildings is 9 times lighter than the brick wall in case of partition wall.8. Gypsum board (gypsum board) partition wall provides excellent sound, heat and fire insulation.9. According to the project details, it is possible to produce profiles in desired lengths.Company Profile New Alpha Builing materials(Shandong) Co. Ltd is a large Light Gauge Steel Profiles, Ceiling T-bar Grids and accessories manufacturer and exporter from Linyi City, Shandong Province, China. We supply a full set of solutions for Exposed grid ceiling suspension system, concealed ceiling system, and Drywall partition system. Also we can supply to our customers other building materials and hardware, including gypsum boards, PVC gypsum ceiling boards, drywall screws and accessories etc. Our factory covers an area of 50000 square meters, with 3000 square meters' office space, and enjoys more than 20 advanced automatic production lines, with an annual output of USD80 millions. Our factory has 80 skillful workers and 10 experienced technicians.Our products have been selling to more than 20 provinces domestically and exporting to Australia, Middle East, Russia,Southeast Asia and other areas, and winning a good reputation from our customers.Always we remind ourselves to provide high quality products, good services and long time trust to all customers worldwide. FAQQ:Are you a manufacturer or trade company ?A:we are professional manufacturer with 24 years experience.Q: How long is your delivery time ?A:10-15 working days after receiving deposit.Q:What is the shipping way?A:by sea or railway.Q:What kinds of ceiling grid you can provide ?A:T24/T15 Flat surface ceiling grid. Flat,Blacking line,Fut,different color surface.Q:Could you offer samples and OEM?A:yes.we could offer samples. we accept OEM,this is free.Q:Is it possible to customization for special size?A:yes,support to prouduce the special size.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...