CIPDB › China Industry › Chemicals › Laboratory Instruments
China, Chinese Bipotentiostat Bigalvanostat with Eis on Both Channels for Rrde and Rde Model CS2350m1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Laboratory InstrumentsBipotentiostatPotentiostat Galvanostat
Wuhan Corrtest Instruments Corp., Ltd.
Preview:
Product Description Bipotentiostat/Bigalvanostat model CS2350M has two sets of independent potentiostat /galvanostat. The two channels can work together to conduct RRDE and hydrogen diffusion tests. In addition, each channel can also work independently in a complete electrical isolation mode. CS2350M bi-potentiostat is composed physically of two CS350M potentiostats. EIS function is included on both channels. Maximun current is +/- 1A on each channel. .Applications(1) Electrosythesis, electrodeposition (electroplating), anodic oxidation, electrolysis (2) Electrocatalysis such as Oxygen reduction reaction (ORR), OER, HER, CO2 reduction.(3) Li-ion battery, solar cell, fuel cell, supercapacitor, advanced function materials, sensor, etc (4) Corrosion behavior of metals, and anti-corrosion evaluation(5) Fast evaluation of inhibitor, water quality stabilizer, coating, and cathodic protection efficiency.Rotating Ring-Disk Electrode (RRDE)CS2350M can work cooperatively with the RRDE setup for the electrocatalysis study, such as LSV on the disk via channel #1 and LSV on the ring electrode via channel #2, to detect the intermediate products on the disk electrode.Hydrogen Diffusion Test (HDT)CS2350M can work with type H cells for hydrogen diffusion / permeating test. The H atoms diffusion coefficient in metal and hydrogen flux can be calculated by measuring the hydrogen charging current in the cathodic chamber and oxidation current in the anodic chamber. Faradaic efficiency testIn electrocatalysis, the Faradaic efficiency is measured to evaluate the performance of the catalyst. The cable connection is shown in below picture. A constant current will be applied on the disk and occur OER and produce oxygen. A constant voltage is applied on the ring and it occurs ORR and consume oxygen. The Faradaic efficiency can be calculated based on disk current and ring current.Specifications Specifications Support 2-, 3- or 4-electrode systemInterface: EthernetPotential control range: ±10V on each channelCurrent control range: ±1A on each channelPotential control accuracy: 0.1%×full range±1mVCurrent control accuracy: 0.1%×full rangePotential resolution: 10μV (>100Hz), 3μV (<10Hz)Current sensitivity:1pARise time: <1μS (<10mA), <10μS (<2A)Reference electrode input impedance:1012Ω||20pFCurrent range: 2nA~2A, 10 rangesCompliance voltage: ±21VMaximum current output: ±1A in each channelCV and LSV scan rate: 0.001mV~10,000V/sCA and CC pulse width: 0.0001~65,000sCurrent increment during scan: 1mA@1A/msPotential increment during scan: 0.076mV@1V/msSWV frequency: 0.001~100 kHzDPV and NPV pulse width: 0.0001~1000sAD data acquisition:16bit@1 MHz,20bit@1 kHzDA Resolution:16bit, setup time:1μsMinimum potential increment in CV: 0.075mVIMP frequency: 10μHz~1MHzLow-pass filters: Covering 8-decadePotential and current range: AutomaticWeight / Measurements: 6.5kg,36 x 30 x16cm Operating System: Windows 10/11Electrochemical Impedance Spectroscopy (EIS)Signal generatorFrequency range:10μHz~1MHzAC amplitude:1mV~2500mVDC Bias: -10~+10VOutput impedance:50ΩWaveform: sine wave, triangular wave and square waveWave distortion:<1%Scanning mode: logarithmic/linear, increase/decreaseSignal analyzerIntegral time: minimum:10ms or the longest time of a cycleMaximum:106 cycles or 105sMeasurement delay:0~105sDC offset compensationPotential automatic compensation range: -10V~+10VCurrent compensation range: -1A~+1ABandwidth: 8-decade frequency range, automatic and manual settingTechniques- CS235MStable polarizationOpen Circuit Potential (OCP)Potentiostatic (I-T curve)GalvanostaticPotentiodynamic (Tafel plot)Galvanodynamic (DGP)Transient PolarizationMulti Potential StepsMulti Current StepsPotential Stair-Step (VSTEP)Galvanic Stair-Step (ISTEP)Chrono MethodChronopotentiometry (CP)Chronoamperametry (CA)Chronocaulometry (CC)VoltammetryLinear Sweep Voltammetry (LSV)Cylic Voltammetry (CV)Staircase Voltammetry (SCV)Square Wave Voltammetry (SWV)Differential Pulse Voltammetry (DPV)Normal Pulse Voltammetry (NPV)#Differential Normal Pulse Voltammetry (DNPV)AC Voltammetry (ACV)2nd harmonic AC Voltammetry (SHACV)Fourier Transform AC Voltammetry (FTACV)Electrochemical Impedance Spectroscopy (EIS)Potentiostatic EIS (Nyquist, Bode)Galvanostatic EISPotentiostatic EIS (Optional freq.)Galvanostatic EIS(Optional freq.)Mott-SchottkyPotentiostatic EIS vs. Time (Single freq.)Galvanostatic EIS vs. Time (Single freq.)Corrosion MeasurementsCyclic polarization curve (CPP)Linear polarization curve (LPR)Electrochemical Potentiokinetic Reactivation (EPR)Electrochemical Noise (EN)Zero resistance Ammeter (ZRA)Battery testBattery Charge and DischargeGalvanostatic Charge and Discharge (GCD)Potentiostatic Charging and Discharging (PCD)Potentiostatic Intermittent Titration Technique (PITT)Galvanostatic Intermittent Titration Technique (GITT)BipotentiostatHydrogen Diffusion Test (HDT)Rotating Ring Disk Electrode(RRDE)Faradaic efficiencyTest(FE)AmperometricDifferential Pulse Amperometry (DPA)Double Differential Pulse Amperometry (DDPA)Triple Pulse Amperometry (TPA)Integrated Pulse Amperometric Detection (IPAD)Stripping VoltammetryPotentiostatic StrippingLinear StrippingStaircase StrippingSquare Wave StrippingDifferential Pulse Voltammetry StrippingNormal Pulse Voltammetry StrippingDifferential Normal Pulse Voltammetry Stripping ApplicationsCorrosion Electrochemistry CS potentiostats/galvanostats support a variety of electrochemical techniques for corrosion, such as OCP recorder, potentiodynamic, EIS, cyclic polarization (CPP), LPR, hydrogen diffusion test, zero resistance ammeter (ZRA), electrochemical noise (ECN), etc. Due to their high input impedance(1013Ω), they are especially suitable for EIS measurement of high-impedance systems like coating, concrete, and pure water.High-impedance coating ageing test in salt spray testsPolarization curves of Ti-alloy& stainless steel in 3%NaCl solutionECN of low-carbon steel in 0.05mol/L Cl+0.1mol/L NaHCO3Energy & Battery TestingWith versatile functions like linear sweep voltammetry (LSV), cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), EIS(including potentiostatic and galvanostatic modes) with precise IR compensation, CS potentiostats are widely used in supercapacitor, Li-ion batteries, Li-S batteries, fuel cell, solar cell, solid-state batteries, flow batteries, and metal-air batteries, etc. CV of PPy supercapacitor in 0.5 mol/L H2SO4 solutionElectrocatalysisBased on CV and LSV techniques, CS potentiostats can carry out long-term tests for ORR, OER, HER, and CO2 reduction, which is crucial for evaluating catalyst stability. In addition, the CS2350M bi-potentiostat and multichannel potentiostat specialize in Faradaic efficiency synchronous measurement.CS potentiostats can measure the half-wave potential (ORR) and overpotential (HER, OER) of catalysts and calculate the power density and energy density of Redox peaks.LSV curves of various catalysts in alkaline solutionAnalytical ElectrochemistryCS potentiostats include comprehensive voltammetric methods such as NPV, DPV, DNPV, SWV, and ACV, which make them ideal for quantitative analysis of trace elements via the intrinsic Voltammetry stripping techniques.Electrochemical SensorThanks to the high current sensitivity(100fA) and voltage resolution(1 mV), the CS potentiostat can be used for the R&D of biosensors and electrochemical sensors. Technical Advantages Switchable floating and earthing mode All CS potentiostats/galvanostats can switch between the floating and earthing modes, and this strategy is beneficial for studying electrochemical systems in which the working electrodes are intrinsically ground, such as autoclaves, in-site concrete structures and multi-working electrodes requiring isolation, etc.High-bandwidth EIS with the help of built-in digital FRA and arbitrary signal generator, as well as the high input impedance (1013 W), the CS potentiostat is particularly suitable for EIS measurements of high-impedance systems (such as coating, membrane, concrete, etc.) Based on the DC bias compensation technique, CS potentiostats can conduct EIS tests under different charge/discharge states of batteries, making them suitable for ultra-low resistance systems, such as power batteries, fuel cells, water-splitting equipment, etc.Multiple electrode configurationsCS potentiostats support 2-, 3-, or 4-electrode configurations and can measure the galvanic current via built-in zero resistance ammeter circuits.Independent multiple channels CS2350M Bipotentiostat/multi-channel potentiostat can be used for the RRDE test, dual-cell hydrogen diffusion test.User-defined sequence testCS Studio 6.0 for Windows software supports user-defined sequence tests ("combination test"), which can facilitate automatic testing according to user-defined experiment sequences. Sequence Test: corrosion tests Sequence Test: Pseudocapacitor testsPower boosterThrough CS2020B/CS2040B/CS2100B booster, the CS potentiostats can extend their output current up to ±20A/40A/100A, meeting the growing requirements in fuel cells, power batteries, electroplating and Software development kit (SDK)All CS potentiostats run under the control of CS Studio 6.0 for Windows (CSS 6.0). The CSS6.0 supports third-party languages, such as LabVIEW, C, C++, C#, VC, Python and others. Some API general interfaces and development examples can be supplied with the CS potentiostats. Through the SDK, customers can implement user-defined test methods. Real-time data saving CSS 6.0 saves experimental data timely, even if the experiment is accidentally interrupted by a power failure or computer shutdown. CSS 6.0 supports several data formats compatible with Originpro and Microsoft Excel. Versatile data analysis functionsCSS 6.0 provides robust functions, including various electrochemical measurements and data analysis. It can complete Tafel plot fitting, CV derivation, integration and peak height analysis, EIS equivalent circuit fitting, etc.3, 4 parameter polarisation curve fitting. EIS fitting Electrochemical noise spectrum analysis Pseudo-capacitance calculation GCD-specific capacitance, efficiency calculation Mott-Schottky analysis CV curve analysisActivation/re-passivation curve analysisBiPotentiostat / BiGalvanostat (2-channel) model CS2350MStandard supply: Instrument CS2350M x1CS studio software x1Power cable x1, LAN cable x1, Electrode cable x 4Dummy cell (1kΩ||100μF) x2
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...