CIPDB › China Industry › Chemicals › Paint & Coating
China, Chinese Fbe Powder Coating with Excellent Corrosion Protection for Oil Pipelines1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Paint CoatingFbe Powder CoatingFusion Bonded Epoxy Powder Coating
Kinte Materials Science and Technology Co., Ltd.
Preview:
Product Description FBE Powder Coating with Excellent Corrosion Protection, Epoxy Resin Powder Coating for Oil PipelinesIntroductionIt's thermosetting epoxy powder is designed to protect pipelines from corrosion in the most demanding operating environments. This product has excellent properties of corrosion resistance and can be widely used in anti-corrosion for steel pipelines carrying oil, gas, water, and others.This product has been certified to meet the requirements of the CSA Z245.20-18 standard.Product FeaturesThe film has high density and adhesion.Excellent chemical corrosion resistance.Excellent physical-mechanical properties.Curing reaction speed can be adjusted according to the customer's request to satisfy the requirement of different spraying.Powder PropertiesItemsAcceptance CriteriaTest ResultTest StandardColorVariousVariousVisual Color-PassCure Time (232±3oC, min)≤3min1CSA Z245.20.14 Section 12.1Gel Time (205±3oC, s)10-3022CSA Z245.20.14 Section 12.2Moisture Content, %≤0.60.29CSA Z245.20.14 Section 12.4Particle Size≥150μm, %≤3.02.5CSA Z245.20.14 Section 12.5≥250μm, %≤0.20Density (g/cm3)1.45±0.051.46CSA Z245.20.14 Section 12.6Thermal PropertiesTg1, oC50-7058.33CSA Z245.20.14 Section 12.7Tg2, oC≥100102.56ΔH, J/g35-6039.58Shelf Life @25oC12monthsTheoretical Coverage0.69 m2/kg/mmFilm PropertiesItemsAcceptance CriteriaTest ResultTest StandardRecommended Film Thickness (μm)≥300Thermal PropertiesΔTg ≤3oC0.79CSA Z245.20 Section 12.7Cathodic Disbondment24 Hours, -3.5V, 65oC, ≤6.5mm28 Days, -1.5 volt, 23oC, ≤8mm28 Days, -1.5 volt, 65oC, ≤10mm28 Days, -1.5 volt, 95oC, ≤15mm1.11.34.55.6CSA Z245.20 Section 12.8PorosityCross-section, Rating ≤3Interface, Rating ≤312CSA Z245.20 Section 12.10Flexibilitybending, -30oC, 3°, No Cracking No Cracking CSA Z245.20 Section 12.11Impact Resistance1.5J, -30oCNo HolidaysCSA Z245.20 Section 12.122.5° Strained Coating28d Cathodic disbondmentNo HolidaysCSA Z245.20 Section 12.13Adhesion, Rating24 Hours, 75oC, 1 Rating1 CSA Z245.20 Section 12.1428d, 75oC, 1-2 Rating128d, 95oC, 1-2 Rating2Tabor Abrasion Cs-17 1kg 5000r ≤300mg 200ASTM D4060HardnessShore hardness >8087ASTM D2240Pull-Off Adhesion>20MPa35MPaASTM D4541Volume Resistivity>1.0*1015 Ω-cm2.0*1015ASTM D257Dielectric Strength>30 MV/m43.5ASTM D149Chemical Restraints10% NaCl Solution, 30d, 23oC No blistering or disbondmentPassASTM G2010% NaOH Solution, 30d, 23oC No blistering or disbondmentPass10% HCl Solution, 30d, 23oC No blistering or disbondmentPass20% Na2CO3 Solution, 30d, 23oC No blistering or disbondmentPass5% HAc Solution, 30d, 23oC No blistering or disbondmentPass30% H2SO4 Solution, 30d, 23oC No blistering or disbondmentPass10% H-NO3 Solution, 30d, 23oC No blistering or disbondmentPassMethyl Alcohol 30d, 23oCPassNote: prepare specimens processabrasive blasting to Sa2.5 near-white metal with a surface profile of 50-100 microns. Then, clean the surface with high-pressure gasPut the specimen into the oven (200oC), and preheat for 40-60 min.Spray the powder on the preheated specimen with an electrostatic spray gun, then put it in the oven, and keep 5-10 minutes at 200oC The dry film thickness is 350±50μm.Coating Reference1. Application: Factors such as plant capability, specifications, and pipe construction or characteristics can affect application conditions. The recommended application temperature range is 200-220oC.2. Surface Preparation: Remove all surface contamination before abrasive blasting. Blast clean using steel grit to Sa2.5 near-white metal with a minimum surface profile of 2 mils/51 microns.Precautions1. All data are based on laboratory testing and practical experience.2. It is recommended that the product should pass process evaluation before mass use, so as to avoid an unnecessary loss to customers due to various reasons such as process.Package and Storage1. The package is 25kg per box, lined with polyethylene plastic bags. In the course of shipment, it should be loaded or unloaded lightly and avoid direct sunlight and heat, and moisture.2. The product should be stored in a cool, ventilated, dry room with a temperature below 25oC and humidity below 65%.3. Keep away from fire and heat and tide.4. After use, it should be sealed in time to prevent powder from being polluted and damped.5. Reduce the number of movements to avoid impact and pressure.6. The maximum stacking height should not exceed 5 layers.Company Profile:Kinte Materials Science and Technology Co., Ltd. is subordinate to China Machinery Industry Corporation (a key state-owned enterprise directly managed by SASAC, ranking 284 among the world's top 500 in 2021). It is a national high-tech enterprise under China National Electric Apparatus Research Institute Co., Ltd. (Stock Code: 688128), a listed enterprise on the SSE STAR MARKET. Focusing on the R & D, production, and sales of environmentally friendly coatings (powder coatings, waterborne industrial coatings) and powder coating resins, the company is committed to improving the global market competitiveness of China's environmentally friendly coating industry. Now it has become the leader and promoter in China's technological development of environmentally friendly coatings as well as polyester resins for powder coatings! We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification, and QUALICOAT Certificates. Due to the excellent and stable quality, our products always enjoy a high reputation at home and overseas, and were sold to more than 30 countries.The powder coating branch was founded in 1992, and now there are two factories (the Guangzhou factory and the Wuhan factory) with an annual production capacity of over 25,000 tons. And we have cooperated with many famous clients such as Gree, Pansonic, HITACHI, Mitsubishi, Walmart, HUAWEI, EMERSON, Hisense, Dicastal, BYD, AAG, etc.We unremittingly stick to the business principle of "Quality is the life, adhere to first-class technology, first-class quality, first-class cost, and first-class brand". We would like to provide a complete set of services and solutions for both domestic and abroad customers and would like to go forward to a brilliant future with you together.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...