CIPDB › China Industry › Chemicals › Paint & Coating
China, Chinese 1K/2K Grey Primer Good Adhension Acrylic Car Paint Easy Sanding Spray Paint1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Paint CoatingAutomotive PaintCar Paint
Hengpu Coatings Co., Ltd.
Preview:
Product Description 1K Grey Primer1. Product features: a one-component self-drying paint made of alkyd resin, anti-rust pigment, fillers, cellulose and other materials. It has good construction performance, quick drying, easy polishing and storage stability 2. Applicable substrate: polished and completely dry clean surface of old paint, polyputty, etc. 3. Mixing ratio (volume ratio) : stir evenly, can be constructed. 4. Spraying requirements: coating -4 cups/viscosity 20-25 seconds, upper pot spray gun 1.3-1.5mm caliber, lower pot spray gun 1.7-1.8mm caliber, air pressure is 3-5 bar, spray 2-3 channels, stand for 2-5 minutes. 5. Drying time: non-sticking time: 5 minutes /25oC. Polishing time: 30 min /25oC. 6. Grinding process: Use water sandpaper P600#-P1000# 7. Points for attention: (1)Please stir well before use and filter well.(2) In order to ensure the painting effect, please use standard thinner (fast drying, standard drying, slow drying) can not be thick coating, the use of other poor thiiner will lead to paint foaming, discoloration and other maladies. Do not pour the remaining base paint back into the original paint bucket after spraying. Otherwise, resin and pigment may delaminate, sink, and agglomerate. then next spraying, it may fall off during polishing, affect the adhesion between the basecoat paint layers, and crack.2K Grey Primer1. Features: This product is a two-component high solid intermediate paint with excellent filling and flatness, quick drying and easy polishing. Strong binding force to upper and lower coatings2. Application: Mainly used for all kinds of vehicles, mechanical equipment and other intermediate coating, in order to increase the gloss and fullness of topcoat.3. Suitable substrate: polished and clean and dry atomite, epoxy primer, 2K old paint and other surfaces.4. Mixing ratio (volume ratio): 100:25:255. Spraying viscosity and service time: mix evenly before use, spraying viscosity is 20 seconds (coating -4 cups, 25oC), service life is less than 2 hours /25oC.6. Spraying requirements: Choose 1.4-1.8mm caliber spray gun, air pressure 3-4 bar, spray 2-3 single layers, film thickness 35-50um, flash dry for 5 minutes every time.7. Drying time: self-drying at room temperature 25oC for about 1 hour can be water mill, dry grinding for about 2 hours. Bake 60 ° C -70 ° C /10 minutes.8. Grinding process: water sandpaper P600-P1000 or (mechanical) dry grinding P320-P400.9. Points for attention: (1) The paint should be thoroughly stirred before spraying, and supporting the use of hardener, diluent. according to the temperature, diluent is divided into (standard dry, fast dry, slow dry). (2) When spraying, the first layer not to be too wet and thick, and the volatile time between the layers should not be too short; (3) must be completely dry in the case of grinding, otherwise it is easy to bite sandpaper or sand marks seriously cause color paint loss light and other maladies.Car Paint, Auto Paint, Automotive Paint,Auto refinish, Car Refinish, Automotive refinish ---Fast Double Pack Primer SurfacerMulty-purpose double pack fast drying primer surfacer, with strong filling power, fine adhesion between coats and good sanding properties, can increase gloss and build of topcoat. The recommended application temperature is below 25 degreeSubstratesDried and sanded existing finishes, all kinds of primer and putty.Surface CleaningRemove wax, silicon and other contaminations with degreaserMixing RatioTemperatureItemWeightVolumebelow 25 degreeFast Primer Surfacer100 parts3 partsFast Drying Hardener25 parts1 partsThinner25-40 parts1-1.5 partsPot Life25 degree, 45 minutesNo. of Coats2-3coats, 40-60um in total.Flash-off Time5-10 minutes, 25 degreeSSpray Gun & PressureGravity Feed 1.4-1.6mm 3-5kg/cm 2Siphon Feed 1.7-1.8mm 3-5kg/cm 2Drying Time 25 degree, 2-3 hoursSandingP400-P600 dry or P800-1000 wet.Re-coatAfter drying and sanding, re-coat all kinds of topcoat.Shelf life2 years in original sealed can at cool and dry place at 20 degreePackagingPrimer Surfacer: 4kg; Hardener: 1LGood Quality Car Paint, Car refinish, Auto paint, auto refinishEpoxy Primer Fast DryExellent rust-proofing and excellent adhension to steel, aluminium and galvanized steel.Substrates Dried and sanded existing finishes, steel, iron and glass fiber reinforced plasticSurface CleaningRemove wax, silicon and other contaminations with degreaserMixingRatioTemperatureItemWeightVolumeAbove 30degreeFast Epoxy Primer100 parts3.5 partsDrying Hardener20 parts1 partsThinner20-30 parts1 partsUnder 30 degreeFast Epoxy Primer100 parts3.5 partsFast Drying Hardener20 parts1 partsThinner20-30 parts1 partsPot LifeAt 25degree, Fast Drying Hardener: 3-4 hours; Drying Hardener: 4-6 hoursNo. of Coats2 coats, about 30-50 umFlash-off TimeAt 25degree, 5-10 minutes between coats.Spray Gun and PressureGravity Feed 1.4-1.6mm 3-5kg/cm 2Siphon Feed 1.7-1.8mm 3-5kg/cm 2Drying TimeItem25degree70degreeFast Drying Hardener3-5 hours40-50 minutesDrying Hardener6-8 hours50-60 minutesSandingDry sanding with P240-P400, or wet sanding with P600-P800Re-coatAfter drying and sanding, re-coat with putty, primer surfacer and all kinds of topcoat.Shelf Life2 years in original sealed can at cool and dry place at 20degreePackagingEpoxy primer in 5kg, Hardener in 1L, Thinner in 1L
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...