CIPDB › China Industry › Chemicals › Laboratory Instruments
Industrial Chemical Vacuum Oven Three-Layer Vacuum Nitrogen Oven High Temperature Drying Oven1
Laboratory InstrumentsIndustrial OvenHigh Temperature Oven
Dongguan Hongjin Test Instrument Co., Ltd.
Preview:
Product Description Product DescriptionProduct application:Vacuum ovens are widely used in biology, chemistry, chemical pharmaceuticals, medical and health, agricultural research, aviation research, satellite research, teaching research, lithium battery research and other industries, powder drying, product baking, vacuum temperature testing, etc., as well as disinfection and sterilization of various glass containers. They are particularly suitable for fast and efficient drying of heat-sensitive, easily decomposable, easily oxidizable substances and items with complex components.Sample restrictions:This test equipment is prohibited from testing samples of flammable, explosive, and volatile substances; testing of samples of corrosive substances, testing of biological storage, testing and storage of samples of strong electromagnetic radiation sources, etc.Equipment functions:1. The temperature, constant temperature time, vacuuming, nitrogen filling and other parameters of the vacuum oven are set through the touch screen, and the PLC automatically completes the following functions: vacuuming → standing → nitrogen filling (time control cycle is used for repeated cycles) → heating → constant temperature timing → nitrogen filling → end alarm;2. It has functions such as over-temperature protection, overload protection, and phase loss protection. It can automatically stop heating, vacuuming and other functions in case of failure;3. The equipment is easy to operate and can be easily mastered by workers without the need for professional personnel;4. The equipment uses vacuum-specific control valves, vacuuming and nitrogen filling, which is highly efficient, saves personnel, and has good product performance;5. The inner cavity of the equipment is welded with 5.0mm thick 304# stainless steel, which has strong corrosion resistance and strengthens vacuuming without deformation;6. The outer box is made of 1.2mm thick Q235 cold-rolled steel plate, angle iron, channel steel and other materials; single cavity single door opening;7. The equipment is equipped with movable casters and fixed foot cups;8. It adopts high-quality stainless steel heating tube and external heating. The equipment undergoes temperature test and vacuum test before leaving the factory.Product parametersInner dimensionsWidth 850×Depth 800×Height 350mm; (three layers independently controlled)Outer dimensions approxWidth 1700×Depth 1120×Height 2150mm including casters, subject to the actual product.InterlayerThe single box is divided into 3 fixed layers, 50mm from the bottom and above the first layer, and equipped with 3 mesh plates, which can be pulled out.Inner material304# stainless steel industrial plate, 5.0mm thick, reinforced treatment, vacuuming without deformation.Outer materialQ235 cold-rolled steel plate, 1.2mm thick standard plate, surface powder paint treatment.Insulation materialHigh temperature resistant glass fiber rock wool, thermal insulation effect Good.Sealing materialHigh temperature resistant silicone sealing strip.Box structureIntegral type, the left part is upper, middle and lower product boxes, the right part is for electric control and vacuum pump installation, movable casters and adjustable fixed feet are installed at the bottom of the machine, which is convenient for movement and fixed position.Timing functionThe touch screen instrument has a built-in timing function, which stops heating, vacuum, nitrogen filling and other functions when the time is up, and alarms at the same time.Current controllerSolid state relay SSR has no contactHeating methodThermal radiation convection, heating tube is installed outside the cavity.Heating elementHigh temperature resistant stainless steel heating tube.Temperature rangeThe temperature is adjustable from +30 to 200oC at normal temperature.Instrument control accuracy±0.5oC (Constant state)Instrument display accuracy0.1oCTemperature deviation±5oC. (Empty box test geometric center test point)Vacuum range0.0KPa to -100.00KPa, the displayed value is different in different regions;Vacuum pressure leakage rateAverage about 0.8KPa/hourVacuum control methodAutomatic control, stop vacuuming when reaching the upper limit, automatically replenish vacuum when below the lower limit (start difference 0.5KPa interval), so as to work in a cycle and keep the vacuum degree automatically constant.Pressure relief methodAdopt solenoid valve control, manual pressure relief when pressure relief is required.Vacuum pipelineStainless steel pipe, steel wire hose, clamp, etc.Vacuum control valveKF16 high vacuum pneumatic valve, inflation pressure relief valve, pipeline exhaust valve, etc.Vacuum configurationAdopt RH0040 single-stage vacuum pump, power 380V/2.2KW.VoltageAC 380V/50Hz three-phase five-wireCurrent30ATotal power20KWCompressed gas source0.4~0.6MPa vacuum valve useNitrogen source0.2~0.3MPa baking product use
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...