CIPDB › China Industry › Metallurgy, Mineral & Energy › Steel & Products
China, Chinese Factory Supply 9cr18MOV/SUS440b/1.4112 Martensitic Stainless Steel1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Steel Products9cr18MOV Stainless SteelMartensitic Stainless Steel
Zhejiang ZhengCheng lmport & Export Co.,LTD
Preview:
Product Description Product Description Factory Supply 9cr18MOV / SUS440b / 1.4112 Martensitic Stainless Steel9Cr18MoV martensitic stainless steel is mainly used for tools with high hardness, high wear resistance, and high corrosion resistance, and is widely used in various cutting tools, scissors, machining, medical equipment, and other cutting tools. Its excellent cutting edge retention, corrosion resistance, and toughness make it an ideal choice for many tools.Similar GradeExecution standardZEICIN GradeGBASTMJISDINGB/T 1220-2008ZDF-99Cr18MoVAISI 440BSUS440B1.4112 Main chemical composition %CCrMnSiMoV0.85~0.9517.00~19.00≤0.80≤0.801.00~1.800.07~0.12CoSPNiNbW-≤0.03≤0.035<0.60-- Product details #NameSpecification1Steel grade9Cr18MoV / AISI440B / SUS440B /1.41122SizeCustomized size according to customer requirements3Toleranceaccording to order4TechniqueSpecial smelting process: EAF+LF+VD+RS ESR process. to Innovating Chinese quality.5Surface Black surface / Turned Surface6ApplicationChef knife/ Kitchen knife/forged knife/Army knife/outdoor knife/scissors/Haircut scissors/pet scissors/razors etc. Heat Treatment of 9Cr18MoVStepTemperature RangeHolding TimeProcess DescriptionHeating1150 ± 10 oC20-100 minutesHeat to the specified temperature to uniformly dissolve alloying elementsCooling980 ± 10 oC20-100 minutesCool in the furnace to further homogenize the steel structureForging1000oC~1150oC Forging base temperature, final forging temperature between 780oC ~ 900oCNormalizingFirst heating: 800 ± 10 oC30-120 minutesFirst heating to 800oC,then raise to 920oC,air cool to 200-300°c Second heating: 650 ± 10oC30-120 minutesSecond heating to 650oC, then raise to 750oC, air cool to room temperatureTempering220~240°C30-100 minutesTempering followed by air cooling to room temperature Main features and advantages of 9Cr18MoV1)High hardness and wear resistance9Cr18MoV, after proper heat treatment, its hardness can reach 58- 60HRC. This step makes stainless steel have excellent wear resistance, widely used in cutting tools, tools, and other high-wear occasions.2)Excellent corrosion resistanceThe material contains a high chromium content (about 18%), which provides good corrosion resistance and enables it to maintain stable performance in wet, chemical environments.3)Excellent toughness9Cr18MoV has good heat treatment performance and can obtain the required hardness and toughness through a suitable heat treatment process, which is suitable for high-precision manufacturing requirements.Our AdvantagesProduction process Major Equipment1. Electric Arc Furnace2. ESR3. 5T Forging Machine4. Vacuum Annealing Furnace5. Non-destructive Detector6. Rolling Mill7. Drawing Mill8. Spray Forming Surface conditionMetallographic Organization ComparisonPhoto1(Domestic). Carbon carbide size obviously appears big size.Photo 2 (abroad), the carbide distribution is uneven, and the individual is large. Reason analysis: During the smelting process, the carbide can not be controlled well. In the late forging, although the forging ratio increases, it fails to make up for the defects of the smelting.Photo3(ZhengDa=Zeicin) the modification of three technological processes of 1)EAF+LF+VD, 2) Special innovation smelting process of RS ESR, 3) transformation forging, so that it is obviously better than the imported ones. The carbide is small and uniform.Photo 1 (domestic), the carbide individual is obviously large, and the processing will exhibit the phenomenon of detachment.Photo 2 (abroad), The carbides are superior to domestic ones, but there are more angular carbides, and cracks and stress concentrations are easy to occur in use, leading to early failure.Photo3(ZhengDa=Zeicin), the modification in the process of smelting and forging, the level of carbide is obviously superior to the imports.Photo 1 (domestic), Zonal carbides are obvious, the carbide particles are obviously larger than the longitudinal ones, causing analysis: no modification of forging, just rolling directly.Photo 2 (abroad), the distribution of carbides is not uniform, and the individual is large. Reason analysis: During the smelting process, the carbide can not be controlled well. In the late forging, although the forging ratio increases, it fails to make up for the defects of the smelting.Photo3(ZhengDa=Zeicin) the modification of three technological processes of 1) EAF +LF+VD, 2) Special innovation smelting process of RS ESR, 3) transformation forging, so that it keeps obviously better than the imported ones. The carbide is small and uniform.The other steel grades that we can offer correspond to the following:TypeZEICIN GRADESIMILAR STEEL GRADESGBJISASTMDINMartensite Stainless Steel9Cr18Mo9Cr18MoSUS440CAISI 440C1.41259Cr18MoV9Cr18MoVSUS440BAISI 440B1.411211Cr1711Cr17SUS440CAISI 440C1.4125SUS440A68Cr17(7Cr17)SUS440AS440021.410910Cr15Comav10Cr15ComavVG10//5Cr15MoV5Cr15MoV420hc420MOVW1.4116(X50CrMoV15)7Cr17MoV7Cr17MoVSUS440A/AUS6440A/SUS440FY108Cr17 (Y11Cr17)SUS440FS44020/440F1.4025SUS420J2 3Cr13SUS420J2S42000/420X30Cr13/1.4028VG10/VG10//BG42BG42///YTG1344Cr13SUS420420*1.2083ApplicationsApplications of 9Cr18MoV stainless Knife:Because 9crl8MoV stainless steel has high hardness, excellent edge protection, and good corrosion resistance, it is widely used in the tool industry. It is commonly used to make various types of knives, such as folding knives, hunting knives, and kitchen knives, making it ideal for high-performance cutting tools.Hair Scissors:Due to the high material requirements of the barber scissors, it is necessary to have a certain sharp blade and durable cutting ability. And the addition of vanadium provides the effect of refining grains, so that the scissors maintain a certain toughness while maintaining high hardness, reducing the risk Medical equipment:Because 9Cr18MoV has high corrosion resistance and antibacterial properties, such as scalpels, surgical scissors, etc., these tools can be kept sharp in long-term use, and it is easy to clean and disinfect. Customer FeedbackWe highly value all feedback from our customers, as it helps us continuously improve and ensure we meet your expectations. Below are some insights from our esteemed customers, including feedback from one of our Korean customers who has previously purchased Japanese products: Packaging & ShippingFAQQ1: Do you accept trial orders?A1: Yes, we accept trial orders, provided that the required size and model are in stock.Q2: What is your delivery time?A2: If the products are in stock, the delivery time is generally 5-15 days. If the products are out of stock, the delivery time may range from 15-20 days, depending on the order quantity.Q3: Do you offer discounts for bulk orders?A3: Yes, we offer discounts for bulk orders. The specific discount will depend on the order quantity and terms of cooperation. Please feel free to contact us for more details.Q4: What is your product packaging like?A4: Our products are packaged in standard industrial packaging to ensure safety during transportation. If you have specific packaging requirements, please let us know when placing the order, and we will package your items accordingly.Q5: What payment methods do you support?A5: We accept a variety of payment methods, including T/T, L/C, Alipay, PayPal, etc. The specific payment method can be arranged flexibly based on the order amount and customer needs.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...