CIPDB › China Industry › Metallurgy, Mineral & Energy › Non-ferrous Metal & Products

Mixed Metal Oxide (MMO) Coated Titanium Clad Copper Wire Anode¹

Preview:

Product Description Mixed Metal Oxide (MMO) Coated Titanium Clad Copper Wire AnodeYUXI's wire anodes are composed of titanium clad copper wire which is bonded to mixed metal oxide coating. Capable of superior operating performance, it can be used in both soil and aqueous environment, such as fresh, brackish or saltwater. It can twist around the pipelines to provide continuous close protection, or be connected to a feed cable at one end or 'piggybacked' to form a continuous anode suitable for installation under storage tanks.Product DescriptionQuality Substrate MaterialOur highly-conductive copper core are surrounded by high-tensile titanium, which meets commercially ASTM B348 Grade I/II standards. Element Grade I Grade II Iron (Fe) 0.20% max. 0.30% max. Carbon (C) 0.08% max. 0.08% max. Nitrogen (N) 0.03% max. 0.03% max. Hydrogen (H) 0.015% max. 0.015% max. Oxygen (O) 0.18% max. 0.25% max. Single Impurity (Each) 0.10% max. 0.10% max. Other Impurities (Total) 0.40% max. 0.40% max. Titanium (Ti) Remainder RemainderLong Service CoatingWhether operating in soil, mud, fresh water or seawater, mixed metal oxide coatings demonstrate high chemical stability, even in environments with low pH values. Depend on the form of usage, the coatings can be mixed of two or more metal oxides such as iridium oxides (IrO2), tantalum oxides (Ta2O5) and ruthenium oxides (RuO2). Based upon accelerated life testing conducted by an independent laboratory, our MMO coating has been proven to be superior to other similar products in the market.1.Ir-Ta Mixed Metal Oxide CatalystThe iridium-tantalum mixed metal oxide catalyst is recommended for use in soil or fresh water, where there is either no chloride ions or low chloride ions present. Technical Measurement Performance Coating Element IrO2, Ta2O5 Coating Thickness 0.5~1 μm Coating Uniformity 85% min. Working Environment Fine sand, Coke Breeze, Freshwater2.Ir-Ru Mixed Metal Oxide CatalystThe iridium-ruthenium mixed metal oxide catalyst can be used in seawater, brackish water, mud, concrete and any other severe environment conditions including high acidity or in the presence of chlorine or oxygen. Technical Measurement Performance Coating Element IrO2, RuO2 Coating Thickness 0.5~1 μm Coating Uniformity 85% min. Working Environment Mud, Concrete, Seawater* We can produce anodes with different nobel metal oxide ratios and differing coating thickness as specific required.Electrochemical PropertiesThe current output of the anode varies in different applications from soil to seawater. Longer working life can be achieved by increasing the coating thickness or reducing the operating current density.1. In Soil Wire Diameter For 20 yrs. For 30 yrs. For 50 yrs. 1.5 mm (0.06") 240 mA/m (74 mA/ft.) 160 mA/m (49 mA/ft.) 96 mA/m (29 mA/ft.) 3.0 mm (0.12") 480 mA/m (147 mA/ft.) 320 mA/m (98 mA/ft.) 192 mA/m (59 mA/ft.)2. Coke Breeze / Freshwater Wire Diameter For 20 yrs. For 30 yrs. For 50 yrs. 1.5 mm (0.06") 480 mA/m (146 mA/ft.) 320 mA/m (97 mA/ft.) 192 mA/m (58 mA/ft.) 3.0 mm (0.12") 960 mA/m (291 mA/ft.) 640 mA/m (194 mA/ft.) 384 mA/m (116 mA/ft.)3. In Brackish Water Wire Diameter For 20 yrs. For 30 yrs. For 50 yrs. 1.5 mm (0.06") 1440 mA/m (438 mA/ft.) 960 mA/m (292 mA/ft.) 576 mA/m (175 mA/ft.) 3.0 mm (0.12") 2880 mA/m (876 mA/ft.) 1920 mA/m (584 mA/ft.) 1152 mA/m (350 mA/ft.)4. In Seawater Wire Diameter For 20 yrs. For 30 yrs. For 50 yrs. 1.5 mm (0.06") 2880 mA/m (876 mA/ft.) 1920 mA/m (584 mA/ft.) 1152 mA/m (350 mA/ft.) 3.0 mm (0.12") 5760 mA/m (1752 mA/ft.) 3840 mA/m (1168 mA/ft.) 2304 mA/m (701 mA/ft.)Product ParametersSPECIFICATION1.Ir-Ta Mixed Metal Oxide Catalyst Item No. Diameter Length (per roll) Surface Area Weight Linear Resistance Lifetime YX-CTM-LW1.5 1.5mm ( 0.06") 152m (500 ft.) 4.75×10-3 m2/m (0.017 ft2 /ft) 12.2 g/m (0.008 lbs/ft) 0.017 Ω/m (0.005 Ω/ft.) 20 yrs. YX-CTM-LW3.0 3.0mm ( 0.12") 152m (500 ft.) 9.5×10-3 m2/m (0.033 ft2/ft) 62.5 g/m (0.042 lbs/ft) 0.003 Ω/m(0.001 Ω/ft.) 20 yrs.2.Ir-Ru Mixed Metal Oxide Catalyst Item No. Diameter Length (per roll) Surface Area Weight Linear Resistance Lifetime YX-CTM-SW1.5 1.5mm ( 0.06") 152m (500 ft.) 4.75×10-3 m2/m (0.017 ft2 /ft) 12.2 g/m (0.008 lbs/ft) 0.017 Ω/m (0.005 Ω/ft.) 20 yrs. YX-CTM-SW3.0 3.0mm ( 0.12") 152m (500 ft.) 9.5×10-3 m2/m (0.033 ft2/ft) 62.5 g/m (0.042 lbs/ft) 0.003 Ω/m(0.001 Ω/ft.) 20 yrs. Packaging & ShippingPACKAGING INFORMATIONWe have strict packing protocols to guarantee safe delivery of our products. Clear shipping marks and documentation make delivery acceptance straightforward and simple. Both air freight and sea freight are available. DHL,UPS and FedEx are our partners for air logistics. Please let us know your preference. (Remarks: Custom packing is available upon request.)CertificationsWE ARE PROVEN TO BE QUALIFIEDYUXI insists on high standards of materials and workmanship -- giving us a further edge against the competition. Approved by professional institutions and certificate authority, our anodes and electrodes are manufactured to comply with international industry standards. Therefore, our products have been deemed durable and efficient for longstanding pursuit of excellence.WE ARE TRUSTED BY INDUSTRY BENCHMARKAs a leader in corrosion control and electrochemical technology, YUXI is dedicated to staying at the forefront of the market sector. We are committed to providing our customers with the excellent product, highest quality workmanship and dependable customer service. YUXI takes pride in establishing valuable connections with most respected and name-brand enterprises around the world, especially in oil & gas value chain, construction engineering and energy industry.Company ProfileABOUT YUXIWith over a 20 year heritage of innovation in corrosion control science, ZHEJIANG YUXI CORROSION CONTROL CORPORATION is a leading solution provider in the fields of cathodic protection systems, AC mitigation and CP remote monitoring system. YUXI contributes to offering cathodic protection system design on new build and existing structures, including pipelines, well casings, above ground storage tanks, water tanks, water processing structures, pump & compressor stations, power plants, marine structures, bridge piles and beams, etc. Our expertise spans all types of SACP(sacrificial anode cathodic protection) and ICCP(impressed current cathodic protection) systems, moreover, a combination of these two systems.YUXI is specialized in providing a full suite of services for CP system design, from initial survey, through on-site inspection, detailed engineering design, to cathodic protection system modelling & performance simulation, and handover. Our NACE certificated engineers and technicians are ready to propose the best CP solution for preventing corrosion from damaging and tearing down your valuable assets -- lower in cost while longer lives. Identifying customer needs in the rapidly changing industry environment, we bring extensive expertise in insightful research, solid strategy, optimal solutions and engineering service. We take pride in delivering quality services for gas, petroleum, electrical energy, marine engineering, infrastructure, chemicals and metallurgy industries worldwide. Approved by Aramco, Total, Kuwait Oil Company, TechnipFMC, SLB, Subsea 7, McDermott, Petronas, we have built long-term business relationship with more than 1,000 customers across over 50 countries and gain an international reputation in the past years.TAKE A FACTORY TOURWith years of manufacturing experience and attentive efforts, YUXI have built up production bases in local China mainland and Malaysia, covering the full product scope - sacrificial anodes, silicon iron anodes, mixed metal oxide anodes and water heater anodes. This scales up our competency of supply chain ── enabling us to quickly deliver the products to comprehensive customers in specific fields. We operates all factories with advanced quality assurance processes managed by a team of professional engineers and veteran staff. We consistently implement rigorous procedures across the whole production chain to meet the requirements of ISO 9001:2015. This, in turn, ranked YUXI to be a trustworthy partner for a sustainable business relationship.FIND US ON EXHIBITIONSYUXI annually participates in many industry trade fairs and big events around the globe. Stop by our booth at your favorite event, we warmly invite you to meet us at AMPP Annual Conference + Expo, Offshore Technology Conference (OTC), Oil & Gas Asia (OGA) Expo, Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC), etc.FAQFREQUENTLY ASKED QUESTIONS01 | Are You A Manufacturer or Trading Company ? We are an experienced manufacturer, and also licensed to export globally. With years of manufacturing experience and attentive efforts, YUXI have built up production bases in local China mainland and Malaysia. This scales up our competency of supply chain ── enabling us to quickly deliver the products to comprehensive customers in specific fields. 02 | When Can I Get A Quotation ?We will do our best to respond within 3 business day (Monday to Friday 8:30 am - 5:30 pm) when we received your inquiry. If you are in urgent to get the quote, please call us at +86 (574) 8388 2233. Do specify the dimensions, quantity and delivery location, if you preferred to get a quick reply.03 | Can I Get A Sample ?We are pleased to offer the samples upon the payment of nominal sample fee and freight charge. But the sample cost can be refund if your first order that meets the specified value.04 | How Long Will It Take To Get The Samples ?Generally regular sample in stock can be delivered in 7-10 days after receipt of payment. But it takes around 15-20 days if the goods are out of stock.05 | What Is Your Minimum Order Quantity ?The MOQ varies depending on the product. Please feel free to check with us for specific items.06 | What Is The Lead Time for Bulk Orders ?For most regular items, the standard lead time is approximately 45 days. For customized items, the estimated lead time will be advised by our sales representatives. However, actual production time normally depends on order quantity and specifications. 07 | Do You Provide OEM/ODM Service?Absolutely! We have in-house industrial design and engineering teams that can help you find the most comprehensive solution by tailoring to the specific needs of your project - from concept to completion. Our experts will draw up an all-in-one plan that meets your functionality requirements and expense budget. 08 | Do You Have Any Certification ?Equipped with state-of-the-art experimental facilities and detection apparatus, we constructed first class engineering laboratory approved China National Accreditation Service for Conformity Assessment, including corrosion simulation lab, material synthesis lab, electrochemical property testing lab, chemical composition testing lab and physical property testing lab. To comply with international industry standards, our anodes are qualified by ASTM, ABS, DNV, CCS, BV, ISO 9001. Extra testing requirement is available upon request.09 | What are Your Payment Terms?T/T and L/C are the most common forms of payment, specific terms can be discussed with you prior to you issuing a purchase order. 10 | What Logistics Methods You Can Work For Shipment ?We support both sea and air freight options: sea freight for cost-effectiveness and air freight for speed. We have reliable partnerships with major air freight carriers like DHL, UPS, FedEx. Please let us know your preference. A full set of shipping documents (including proforma invoice, packing list, certificate of origin, etc.) will be prepared for custom clearance.11 | How About Your Product Warranty ?We employ ISO 9001:2015 quality management system and rigorous internal testing standards to ensure the optimum lifespan and performance of our anodes. Each anode is labelled with a unique serial number for quality tracking.

× More Keyword ..

× More Menu ..

×

Manufacturing & Processing Machinery

×

Industrial Equipment & Components

×

Tools & Hardware Products