CIPDB › China Industry › Manufacturing & Processing Machinery › Metallic Processing Machinery

High Quality Wire Drawing Machine/ Continuous Annealing Drawing Machine¹

Preview:

Product Description High Quality Wire Drawing Machine/ Continuous Annealing Drawing MachineProduct Description The machine is used to draw Φ8mm copper rod to Φ1.20~4.50mm annealed wire.1.2.Feature1.2.1.Capstans are driven by servo motors directly and separately. Because of no gear, it costs less power, makes less noise and is easy to maintain. It can keep same performance after several years later. Compared with this new model, the speed of traditional machine will decrease because of gear abrasion.1.2.2.Because the speed of each capstan is driven by servo motor, the speed is adjustable. When customer want to change the output wire size, it only needs to change the final die, because the other dies do not need to be changed to match gear ratio.1.2.3.Traversing is driven by servo motor. It can calculate traversing speed automatically. Direction changing does not need sensor, and it can traverse in two direction according to spool width, which increase traversing reliability.1.2.4.There is a remote monitoring system to monitor the core running parameters and send them back to our service department. It is easy to maintain the machine.Product ParametersItemsModelQty.RemarkPay-off FX-11 Main machineLDD-450-13(S)1 AnnealerLT-5001 DancerCX-11 Dual spoolerSP-6301AlternativeFull automatically dual spoolerSP-630(Z)1CoilerQS-8001 Main machine bearings lubricant oil supply unit 1 Main machine motors coolant supply unit 1 Drawing emulsion supply unit 1 Annealer coolant supply unit 1 Electrical control system 1 Pointing and threading machine 1 2.1.Operation is through Siemens touch screen, which can display operation technical parameters and fault.2.2.Spool loading and unloading are full-automatically, and no need operator involved. Full spool can be automatically transferred out of spooler room, which can guarantee safety of operators.2.3.Spool clamping and wire pressing are regulated by pneumatic, so the speed is adjustable.2.4.Traverse is regulated by T type screw, driven by a servo motor, which can automatically follow the speed of take-up motor, to realize high quality traversing. Direction changing is automatically without detection.2.5.Dual spooler has a wire holding mechanism, which can avoid wire wounded when it is loose during spool changing. It avoids the waste of external layer wire of the spool. It also has a wire pressing head at the bottom of spool to avoid wire from wasting when stranding.2.6.It has an air pressure sensor. When air pressure is lower than set value, it will send out a stop signal. It is safe and reliable. 2.7.The spooler is full welding structure. It is compact, good rigidity, and easy for installation.2.8.Siemens' human machine interface is adopted for monitoring and displaying operation and diagnosis.2.9.Meter counting signal comes from main machine.Detailed PhotosItemPerformance indexRemarkSuitable wire diameterΦ1.00~4.00mm Take-up bobbin sizePND630/500 Max take-up speed30m/swhen bobbin size≥Φ350Bobbin change speed(6-12 )m/S Take-up motor2*30kW Traversing pitch6mm/rInfinitely adjustableTraverse max width460mm Traversing motorServo motor drive Clamp typePneumaticMechanical lock in case of reversingBrake wayPneumatic brake Spool change success rate>99% Meter counting error ratio≤3‰ Coiler Type: Overhead and vertical type. Max. basket size: Φ1150mm.There is a alarm of wire break.Features:1.Capstans are placed on one line, and it is easier to maintain than two lines arrangement type.2.Drawing capstans is made of 45# steel through treatments of forging, hardening and tempering, and coated by Zirconia ceramic ring, to increase lifetime.3.There is a seal ring on the final die holder to prevent lubricant linkage.4.Bearing lubricant oil pump is set externally and driven by a dedicated motor independently connected with electrical system. No.ItemPerformance indexRemark1Cooling typeSpray type 2SpeedSize (Φ: mm)Speed (m/min)International grade A copper, and the strength is no more than 280Mpa0.1512000.2015000.2513200.3012000.407200.654803Number of capstans24 4Number of layers16 5Size of final CapstanΦ120mm 6Motor60~500NmSelf-produced7Bearing NSK (Japan)8Oil seal NAK (Taiwan)Annealing FurnaceIt has an air pressure sensor. When air pressure is lower than set value, it will send out a stop signal. It is safe and reliable.The spooler is full welding structure. It is compact, good rigidity, and easy for installation.No.ItemPerformance indexRemark1Suitable wire diameter9.5mm 2Spool sizePND630PND500 is compatible3Max take-up speed25m/swhen bobbin size≥Φ3504Spooler motors15kW/1470rpmYX2-220M-45Traversing motorServo motorYASKAWA6Traversing pitch6mm/rInfinitely adjustable7Traverse max width460mm 8Traversing motor1.5kW 9Clamp typePneumaticMechanical lock in case of reversing10Brake wayPneumatic brake 11Meter counting error ratio≤3‰ 12Take-up no-load noise85db Electrical control systemThere is a remote monitoring system, which can send the machine information and alarm to our service technician. Our service team can prevent the failures and solve some problem remotely. This system can improve running stability and reduce maintenance time. No.ItemPerformance indexRemark1Power380V/50HzThree phases five wires2Motor driverInvertorsDanfess3PLCS-1500Siemens4Color touch screen5.6 inSiemens5Relay and contactor<63ASiemens6Relay and contactor≥63AMade in China7Contactor<63ASiemens8Contactor≥63AMade in China9Air switch<63ASiemens10Air switch≥63AMade in ChinaPackaging & Shipping Company ProfileOur company has a long history in Cable Production Line Manufacturing. The equipments of production line is popular all over the world and won great recognition from our esteemed customers. Our company has a technical administration team whom engages wire and cable equipment industrial more than twenty years, as well as experienced engineer and skilled workers, our honest business reputation and good sales achievement win the trust from our domestic and overseas customers, the products are exported to United States, France,Spain,Portugal, New Zealand,Brazil, Mexico, Chile,South Africa, Zambia, Egypt, South Korea,Singapore, Indonesia, Thailand, Iran, etc.FAQ? Q: Are you the manufacturer or trading company?A: We are the manufacturer. We have a group of highly qualified engineers and experts, who have been working in the field of OFC equipments.? Q: What is your company's main production?A: We specialized in optical fiber and optical cable machine researching and manufacturing. Our products include Optical fiber coloring and rewinding machine series, Optical fiber secondary coating line series, Optical cable stranding line, Optical fiber cable sheathing line series and other optical cable equipment.? Q: What can we offer our customers?A: Our professional production and technical personnel can train our customers' employees and ensure the smooth production of customers. And will provide our customers with after-sales service.? Q: How long is the machine warranty?A: Warranty period of one year (since the completion of mechanical debugging at the buyer's factory)? Q: Why do I choose your company?A: We have more than 10 years of professional experience in the production of cable machinery, providing high-quality, high-security products.We have an experienced team of skilled workers and engineers.We can support overseas training engineers.We can customize the design, to accept the customer's sample design.We can provide customers with after-sales service.In order to quote the accurate machine for you, we need the following infomation:1.Industries used: cable, copper processing, enameled wire.2.Drawing material: copper wire or aluminum wire. How many tons are used in a month?3.Commonly used specifications

× More Keyword ..

× More Menu ..

×

Manufacturing & Processing Machinery

×

Industrial Equipment & Components

×

Tools & Hardware Products