IPDB › China Industry › Manufacturing & Processing Machinery › Assembly Line & Production Line
Soda Ash Equipment Factory/Sodium Carbonate Product Production Equipment/Production Line Equipment1
Assembly Line Production Line, Chemical Production Line, Sodium Carbonate Production Equipment, Soda Production Line
GYF BIOTECH LTD.
Preview:
Product Description Product Description GYF can provide Line equipment includes a complete line equipment for the following products: calcium oxide, calcium hydroxide, calcium chloride, calcium carbonate.The following is introduced provide Soda Production Line EPC project, both solvay's ammonia soda process and combined ammonia process .Raw material: NaCl, NH3, CO2Reaction principleAdd the plenty of NH3 and CO2 into saturated salt water.NaCl + NH3 + CO2 + H2O== NH4Cl + NaHCO3 ↓And then calcine the NaHCO3 to obtain Na2CO32NaHCO3 == Na2CO3 + H2O + CO2↑ Brief process description of combined ammonia method (Hou Debang)The soda production by combined ammonia method was founded in 1943 by Hou Debang (1890-1974), a Chinese chemical engineering expert.It is a method that combines the two processes of ammonia alkali process and synthetic ammonia process to simultaneously produce two products: soda ash and ammonium chloride. The raw materials are salt, ammonia, and carbon dioxide --- the waste gas from the production of hydrogen from water and gas in synthetic ammonia plant. The chemical reaction principle is: C+H2O=CO+H2 CO+H2O=CO2+H2The combined soda production method includes two processes: the first process is the same as the ammonia soda method, in which ammonia is introduced into saturated salt water to form ammonia brine, and then carbon dioxide is introduced to generate sodium bicarbonate precipitation. After filtration and washing, tiny crystals of NaHCO3 are obtained, and then calcined to produce a pure alkali product. The filtrate is a solution containing ammonium chloride and sodium chloride. The second process involves crystallization and precipitation of ammonium chloride crystals from a filtrate containing ammonium chloride and sodium chloride. "As the solubility of ammonium chloride at room temperature is greater than that of sodium chloride, the solubility at low temperatures is smaller than that of sodium chloride, and the solubility of ammonium chloride in a concentrated solution of sodium chloride is much smaller than that in water.". Therefore, under low temperature conditions, adding finely powdered sodium chloride to the filtrate and introducing ammonia gas can cause ammonium chloride to crystallize and precipitate separately. After filtration, washing, and drying, the ammonium chloride product is obtained. At this time, the filtrate obtained after ammonium chloride precipitation has been filtered out, and is basically saturated with sodium chloride, which can be recycled for use.Compared with the ammonia alkali method, the biggest advantage of the combined alkali production method is that it improves the utilization rate of salt to over 96%, and uses the same amount of salt to produce more pure alkali than the ammonia alkali method. In addition, it comprehensively utilizes carbon dioxide from ammonia plants and chloride ions from alkali plant, while producing two valuable products - soda ash and ammonium chloride. Converting the waste gas carbon dioxide from the ammonia plant into the main raw material of the alkali plant to produce soda ash saves the huge lime kiln used to produce carbon dioxide in the alkali plant; Ammonium chloride, a nitrogen fertilizer, is produced by replacing the useless component chlorine ion (Cl -) from the alkali plant with the ammonia from the expensive sulfuric acid fixed ammonia plant. As a result, calcium chloride, which is not very useful and difficult to handle, is no longer generated, reducing environmental pollution, and greatly reducing the cost of soda ash and nitrogen fertilizer, fully reflecting the advantages of large-scale joint production.Product ParametersProduct quality implementation standard GB210.1-2004, as shown in the following table:Index itemClass I Class IISuperior productSuperior productFirst grade goodsQualified productTotal alkali content (measured by mass fraction of dry base Na2CO3) / % ≥99.499.298.898Total alkali content (measured by mass fraction of wet base Na2CO3) a/%≥98.197.197.596.7Sodium chloride (based on the mass fraction of NaCl) / % ≤0.30.70.91.2Mass fraction of iron (Fe) (on dry basis) / % ≤0.0030.00350.0060.01Sulfate (as mass fraction of dry SO4) / % ≤0.030.03b Mass fraction of water insoluble matter / % ≤0.020.030.10.15Packing density c (g/mL) ≥0.850.90.90.9Particle size c, sieve residue /%180μm ≥ 757065601.18μm ≤ 2.0 a is the content at the time of packaging, and the value of the total alkali in the product at the time of delivery multiplied by the quality of the product delivered divided by the quality of the product on the delivery list shall not be less than this value.b is the control index of ammonia alkali products.c Heavy sodium carbonate control index.Detailed Photos
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.