IPDB › China Industry › Manufacturing & Processing Machinery › Assembly Line & Production Line
UV Light Irradiation Cross-Linking Cable Manufacturing and Processing Machinery1
Assembly Line Production Line, Metal Production Line, UV Light, Irradiation
Harbin Hapro Electric Technology Co., Ltd.
Preview:
Product Description The LED light sources were mounted in a tunnel structure. The light radiated the center of the tunnel where the manufactured wire and cable go through. The radiation power can be set from 0 to 100% smoothly.Optical lens adopts imported ultraviolet fused quartz and vacuum coating technology, which greatly improves the utilization rate of ultraviolet energy. The advantages of UV-LED system over traditional UV lamp system and electron beam radiation and crosslinking:vLow energy consumption :UV-LED system is only consume 1/4 energy comparing that of traditional UV lamp system at same production,1/30 energy comparing that of electron accelerator.vFast production:Compare to crosslinking, and consigned electron beam processing, the crosslinking processing is finished simultaneously with the extrusion.Low production cost:No intermediate movement and storage of the product, save the human power and additional cost. Low cost of UV radiation compound. vLong life expectancy of the system :Life expectancy of the LED device is 4000 hours,no bead loss in normal working environment, and the perfect output power stability, See the life comparison table.Environment friendly:The wave length is only 5nm band width, no short wave length UV energy induced Oz emission, no infrared and heat radiation, no strong visible light pollution. Ozone discharge is included into Emission standards for odor pollutants,US stipulate 0.1ppm, China stipulate 0.15ppm,UVL-I equipment won't products ozone.A water cooling system and a 2kW air blower are needed for extracting small molecule emission from the material during extrusion to keep the tunnel clean. vSmall in size, easy to installation: The system can be inserted in traditional plastic insulating extruding production line, 1.8-2.0m in length and 2.5-3.0m in width in between extruding die and water trouph, water cooling system can be arranged properly. Easy to operation :Pneumatic turn open and close the tunnel structure, make the conveying of the wire and clean the lens easy and ordinary operator can do it.Low cost of maintenance:No lamp should be change, and no reflector should be replaced. The daily maintenance is only the clean of the lens surface by soft paper. For electronic beam system, maintenance is a heavy task. crosslinkingElectron accelerator irradiated crosslinkingUVLED irradiation crosslinking Equipmentinvestment Low(steam room or warm pool)HighMedium Energy consumptionHigh(Long heating)High(>600kW)Low(<22kW) Production costHighHighLow Production cycleLong(Secondary processing)Long(Secondary processing)Short(Online crosslinking) Heat shrinkablelargelargesmall<2% Medium pressure lampElectrodeless lampUVLED irradiation crosslinking Equipment investment LowHighMedium Energy consumption70 kW80kW22kWMaintenance costHighHighLowProduction speedLowLowFast (Online crosslingking)Lamp life500 hours8000 hours40000 hoursConsumablesLamp tube, reflector plateLamp tube, reflector plate,magnetronNo Stability of production speedBadBadGood Environmental OzoneOzoneNo Ozone OperationComplexComplexSimple Floor spaceLarge Large Small Technical parameters:ItemNameSpecification1Power supply3 phase 380V+N+PE ,50Hz2Power consumptionTotal power consumption : 22kW ; Radiation box : 14kW ; Chiller : 5kW ; exhaust fan: 3kW 3Irradiation diameter0~30mm 4DimensionsRadiation box :1500*1300*1615mm(L x W x H)/ Chiller:1500*800*1800mm(L x W x H) 5Light sourceThe self-developed UV LED light source adopts the proprietary chip from the world's top manufacturers.It has high energy output and the unique design of the optical system by using hybrid wavelength technology, adopts imported special material of glass processing into special lens. It has lower energy loss by coating the lens surface , It adopts the liquid cooling system to get longer LED life. 6LED CPSThe self-developed power module adopts the Japanese imported chip and adopts the vacuum irrigation technology to protect it.It has overload, short circuit, circuit breaker, over-current, over-voltage and over-temperature protection.Multi - channel redundant distribution,network control.7Power output Output optical power 0~ 100% (Real limit to 20%~100%)8Lamp lifeUnder normal rated power usage, the life of the LED lamp has decreased to about 70%, which is over 30000 ~40000 hours. 9Production speedPlease refer to the actual production speed table10CharacteristicLow energy consumption,Online cross-linking ,Low production cost,Long life,One key to start & Easy operation,Low maintenance costs, Environment friendly, No Ozone11Cooling wayLiquid cooling12Safe guardingCurrent monitor, Temperature monitor, Scram button,Extinction alarm, Chiller alarm; Constant temperature control from air conditioner13Exhaust smokeSmoke purifier or High pressure exhaust fan
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.