IPDB › China Industry › Manufacturing & Processing Machinery › Assembly Line & Production Line
Wld2024 Metal Parts / Window / Door Automatic Powder Coating Line for Industrial Products Production1
Assembly Line Production Line, Furniture Production Line, Door Painting Line, Bed Painting Line
Guangzhou Weilongda Electromechanical Equipment Co., Ltd.
Preview:
Product Description WLD2024 Metal parts / Window / Door Automatic Powder Coating Line For Industrial Products Production : 1,Basic parameters1.1. Maximum external dimensions of applicable pendants (mm * mm * mm): L6000xW600xH1500.1.2 Spray time: 8 hours per day.1.3 Production site (m * m): 33x11.5.1.4 Power Supply:Three phase AC: 380V; Frequency: 50Hz;Single phase: 220V; Frequency: 50Hz. 2, Process flow and production capacity1. Powder spraying line: hanging up → spraying (automatic spraying or manual supplementary spraying) → baking and curing (adjustable from 180-200 oC) → cooling → hanging down.2. Conveyor chain speed: adjustable from 0-1.5m/min.Appendix 1orderProcess Name Processing Method Process Time (min) Process Parameters Remarks1. Install and hang artificial room temperature components2 manual spraying 1-2 room temperature3 coating baking natural gas 12-18 temperature: 180-200 oC adjustable baking temperature can be adjusted according to coating requirements4 Cooling 115 hanging manual labor 3, Equipment process description and structural design1. Conveyor equipmentThe conveying equipment mainly consists of electric drives, heavy hammer tensioning mechanisms, chains, rails, curved rails, telescopic rails, inspection rails, brackets, electrical control systems, overload automatic protection devices, etc. Adopting QXG300 heavy-duty suspension conveyor chain, the crossbeam type lifting device can bear a load of 160Kg; Electric drive Vmax ≈ 0-1.5m/min, install 1 set of electric drive. The tensioning device is equipped with a displacement limit protection switch device to ensure smooth operation of the entire chain. The entire line is equipped with suspension chain emergency stop switches at the positions of hanging, spraying, and driving equipment on the workpiece, and the driving installation is equipped with mechanical and electrical dual safety protection. The track support frame inside the baking oven is made of 60 × 120 square tube material.2. High temperature oven1) Baking oven body: The high-temperature baking oven adopts a through structure, and the baking chamber body skeleton and support frame are made of profiles, which are made of 50 × 100 and 100 × 100 square tube materials with a thickness of 2.0mm. The insulation board for the high-temperature oven chamber is made of 125mm rock wool socket insulation board, and the middle layer is filled with 100K rock wool insulation material. The inner and outer panels are pressed together with the insulation material, and the outer wall temperature of the chamber is not higher than 15 oC above the ambient temperature.2) Heating system: The heating device adopts indirect heating method, and the outdoor side panel of the hot blast stove is made of 0.5mm thick color coated steel plate; The thickness of the insulation layer is 150mm, and the material is rock wool. The inner panel of the combustion furnace insulation cabinet is made of 0.5mm thick galvanized steel plate; The heat exchanger material is made of high-temperature resistant 321 stainless steel plate welded together; The diesel combustion engine for the high-temperature baking furnace uses the Italian RIELLO brand RL44, with an output heat of 400000 kcal. The hot air circulation fan uses the high-temperature resistant plug-in 5 # centrifugal fan, with a power of 7.5KW and an air volume of 30000M3/h; It can automatically adjust the size of the combustion flame according to the temperature, making the paint temperature more stable.The temperature control system is equipped with two sets of temperature controls to regulate the temperature inside the hot air stove and baking oven (the system will automatically maintain a constant baking temperature); The circulating fan is interlocked with the combustion engine, and the system will automatically shut down the electric heating tube when the circulating fan fails; The system is equipped with protection circuits such as overheating, phase loss, and short circuit.The temperature inside the baking room is automatically controlled by a digital temperature controller for both heating and temperature control. When the temperature exceeds the limit, an audible and visual alarm will sound3) Thermal air curtain machine: Install one set of thermal air curtain machine at each entrance and exit of the baking oven, with a motor power of 1.5kw, to prevent hot air from flowing out. Install one exhaust pipe at the top of the entrance and exit of the baking oven.Company Information :Guangzhou Weilongda Electromechanical Equipment Co.,Ltd., Established in 2000,located in Huadu District Guangzhou,(where is only 20 min by car from Baiyun international Airport) is one of the earliest and largest automobile care and maintenance equipments manufacturers and suppliers in china.The factory covers an area of 18000 sq,m,Specialized in manufacturing spray booths,preparation stations, Powder coating Line ,car lifts,body repair systems,tire changer,wheel balancer,wheel aligners and other relevant garage equipment to the clients all the world.FAQQ: How do you control your production quality?A: We have an independent QC team. Our QC teams do sample inspection, part inspection during production and 100% final inspection before each shipment.Q: Can I have a visit to your company before placing an order?A: Sure, welcome to visit WEILONGDA. Our factories locates in Huadu District Guangzhou.Q: May I know the Lead time?A:The lead time of our machine is 30 -50 days depends on project size and design.Q: What is your payment terms?We accept Trade Assurance, TT, LC, etc.Q: Can you provide the whole workshop automotive equipment?A: Yes. we have 6 series contains nearly all automotive equipment.Q: How long is the warranty?A: Our warranty is 12 months, we will send free parts for replacement in warranty, supply spare parts for lifetime.Q: Are you a factory?A: WEILONGDA invested a factory with an area of 15,000 square meters, specialized in manufacturing spray booths,preparation stations, various car lifts, body repair systems,tire changers and wheel balancers. Q: What is the regular color? Can I order special color which I like?A: The regular color is Blue, Red,Orange.Yes, we can also produce car scissor lift with special color according to client's request. Our Services1. Welcome to visit our factory.2. OEM Manufacturing is available3. We will reply you for your inquiry in 24 hours.4. After sending, we will track the products for you once every two days, until you get the products.5. When you got the goods, we will help you for installation if needed.6. If you have any questions about the problem, contact with us, we will offer the solve way for you.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.