IPDB › China Industry › Manufacturing & Processing Machinery › Assembly Line & Production Line
Pharmaceutical & Medical Factory Automatic Small Glass Bottle Filling Washing Capping Machine1
Assembly Line Production Line, Pharmaceutical Production Line, Pharmacuetical & Medical Machine, Glass Bottles Washing Capping Labeling Machine
Shanghai Iven Pharmatech Engineering Co., Ltd.
Preview:
Product Description Pharmaceutical & Medical Factory Automatic Small Glass bottle Filling Washing Capping MachineProduct DescriptionGlass bottle IV solution production line is mainly used for IV solution glass bottle of 50ml-500ml cleaning,filling, stoppering, capping etc. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquids etc.Detailed PhotosProduction ProceduresStep 1Washing machine:This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.Step 2Depyrogenation TunnelLaminar flow sterilization tunnel used for washed vial's dry sterilization and remove heat, It can reach the highest temperature 300~350oC, efficient sterilization time for 5-10 minutes.It has three working area (Preheat area, heating area, cooling area). Step 3Filling, Vacuuming, Nitrogen Charging, Stoppering MachineFilling part adopts valve filling, high precision in Germany.Nitrogen charging immediately after filling, also nitrogen protection between the nitrogen charging and stoppering.No bottles no filling, no bottles no vacuuming, no bottle no nitrogen charging, ensure the vacuum level in the air tank during vacuuming, meanwhile, make sure the oxygen residual after stoppering (control within 1.0%).Step 4Filling and Stoppering MachineAseptic liquid filling machine is very accurate and stable operation. The filling volume can be directly adjusted through HMI, here we have ORABS equipped with stainless steel laminar air flow hood. Step 5Capping MachineIt is mainly used for glass bottles capping. Continuous operation. Picking up and crimping, at the same time rolling the cap. After the completion, the cap have the same size and edge smooth, good appearance. High-speed, low damaged.Our Advantages1.Separate pipeline for cleaning medium, no cross-contamination, according to GMP requirements.2.Filling head synchronously tracks filling, high filling accuracy.3.Adopt full servo drive system, no mechanical transmission.4.Nitrogen charging function can be configured (before filling, during filling, after filling).5.Quick changeover time for different bottle size. Product ParametersTechnical Specifications:ItemMachine ModelCNGFS16/10CNGFS24/10CNGFS36/20CNGFS48/20Production capacity60-1 00BPM1 00-150BPM1 50-300BPM300-400BPMApplied bottle size50ml, 100ml, 250ml, 500mlFilling accuracy+1.5%Compressed air (m3/h)0.6Mpa1.5344.5Power supplykw4466WeightT7.51113.514Machine size(LxWxH)(MM)2500*1 250*23502500*1 520*235031 50*1900*23503500*2350*2350Company ProfileABOUT US
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.