IPDB › China Industry › Industrial Equipment & Components › Air Clean Equipment
Spray Tower Waste Gas Treatment Equipment for Air Purifier1
Air Clean Equipment, Air Purifier, Air Purification, Waste Gas Treatment Device
HC Flourish Industry Group Co., Ltd.
Preview:
Product Description Spray tower waste gas treatment equipment for Air PurifierAttributesorder nospray towerProcessing customizationyesarticle numberSpray tower waste gas treatment equipmenttypewaste gas treatment equipmentbrandhc flourishmodelFlDT-FQ001Treatment concentration2.0-2.5(mg/L)processing air volume2000-60000(m3/h)Ignition temperature200(oC)airspeed150applicationsPaint room spraying, chemical, food, pigment, electronics and other industriesspecificationsφ800-3300,φ800-4000Product DescriptionWaste gas treatment PP spray towerHigh purification rate, dedicated atomizer, operates stably and is durableDedicated atomizer, long exchange time, no potential leakage, and guaranteed quality.Selected materials for easy installation. Using a dedicated atomizer, the atomizing nozzle completely atomizes the liquid, with a large gas-liquid exchange area and sufficient absorption and purification.Widely usedProvide free multi scenario solutionsSuitable for electronic factories, metallurgical spraying, food, biopharmaceutical, chemical and other places, providing a complete set of solutions.Core gas-liquid reverse purification technology: Extends the reaction time by one time, and the purification rate can reach 99.9% (when using alkaline washing water). Acidic substances such as HCL, NO2, NH3 are dissolved in the absorption solution.Preferred raw materials: low energy consumption, no potential leakage. The tower body of this tower is a cylindrical tower body wrapped with glass as a whole, without segmented connecting flanges, with high strength and no potential leakage. The use of fillers and gas-liquid exchange trays reduces system resistance and reduces fan power.Working principle of spray tower: The pickling equipment generates a large amount of acid mist exhaust gas, mainly composed of hydrochloric acid. The acid mist exhaust gas is pumped into the spray tower by a fan through an arranged air duct (with characteristics such as low exhaust gas flow, low wind resistance, sufficient contact between exhaust gas and alkali solution, and good treatment effect). The gas moves at high speed from bottom to top and comes into contact with the washing solution from top to bottom. Due to the installation of multi-layer pull ring fillers in the tower, the gas-liquid contact area and contact time are increased, allowing for full contact between the gas-liquid inside the tower and the surface of the tower plate. During contact with spray water The pollutant carbon black in the exhaust gas is fully absorbed by water and can be purified; The gaseous pollutants in the exhaust gas are added to the spray water in a certain proportion to make it alkaline. During the spraying process, when water comes into contact with exhaust gas, a biochemical reaction occurs to neutralize gaseous pollutants and achieve good treatment results. During the entire exhaust gas purification process, the equipment does not need to be cleaned, and the spray water used can be recycled. The entire treatment process can be automatically controlled and the operation is simple.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.