IPDB › China Industry › Industrial Equipment & Components › Bearing
Deep Groove Ball Bearing Ssic Full Ceramic Bearings Peek Bearing1
Special Bearing, Ceramic Bearing, Ssic Bearing
Nanjing JPG Bearing & Equipment Co., Ltd.
Preview:
Product DescriptionProduct DescriptionAdvantage Of silicon carbide bearingsSilicon carbide is an inorganic non-metallic material. Silicon carbide has high hardness, high wear resistance, low friction coefficient, strong oxidation resistance, good thermal stability, low thermal expansion coefficient, high thermal conductivity, thermal shock resistance and chemical resistance. Silicon carbide is widely used in various mechanical equipment requiring wear resistance, corrosion resistance and high temperature resistance. Production processThe silicon carbide bearings produced by our company use a new generation of pressureless sintered silicon carbide(SSiC). SSiC seeks to use high-purity a-SiC micropowder and additives to press into a green body, and then through a pressureless sintering process at high temperatures to form high-purity, high-density silicon carbide without free silicon. SSiC has better hardness, strength, corrosion resistance, high temperature resistance, impact resistance and other performance indicators than other ceramics (such as: ZrO2, reaction sintered silicon carbide, etc.).Specificationright elevationleft elevationfront elevationTechnical Specifications(Custom configurations available upon request.)Structure Of SSiC Self-aligning Ball BearingRings: SSiC CeramicRolling Element: SSiC CeramicCage: PTFE ( PA66, PEEK, AISI304 or other plastic material available too)Common Bearing Material Performance Comparison TabPerformanceUnitGCr159Cr18Si3N4ZrO2densityg/cm37.87.93.26Thermal expansion10-6/11173.210.5Elastic ModulusGPa208200320210Poisson's ratio0.30.30.260.3hardness80070017001300Bending strengthMPa240026009001000Compressive strengthMPa35002000toughnessNm/cm22025711Thermal conductivityW/mk30-40153.52.5Specific resistancemm2/m10.7510181015Specific heat450450800400Operating temperature1201501000800CorrosionnoweakStrongStrongNumber of stress cycles10*10610*10650*10650*106Flow contact fatigue failure modedifferencePeel offPeel offPeeling/fracturemagneticHaveHavenonoDimensional stabilitydifferencedifferencegoodgoodInsulationNot insulatedNot insulatedgoodgoodMechanical Properties Of Ssic CeramicItem NO.Mechanical PropertiesUnitParameter1Densityg/cm33.12Porsity %/≤0.153HardnessHRA≥924Bending StrengthMPa.≥4705Modulus of ElasticityGPa.≥4106Fracture toughnessMPa.M1/2≥3.57Coefficient of thermal expansion1X10-6/oC48Silicon carbide content %/≥98%9Free-silicon content %/noneCeramic Bearing Description1. Ceramic bearings have the characteristics of high temperature resistance, cold resistance, wear resistance, corrosion resistance, anti-magnetic and electrical insulation, oil-free self-lubrication, and high speed. It can be used in extremely harsh environments and special working conditions. It can be widely used in aviation, aerospace, navigation, petroleum, chemical, automotive, electronic equipment, metallurgy, electric power, textiles, pumps, medical equipment, scientific research, national defense and military fields. High-tech products for the application of new materials.2. The ceramic bearings, rings and rolling elements produced by the company are made of all ceramic materials, including zirconia (ZrO2), silicon nitride (SisN4), and silicon carbide (SiC). The retainer is made of polytetrafluoroethylene, nylon 66, polyetherimide, zirconia, silicon nitride, stainless steel or special aviation aluminum, thereby expanding the application range of ceramic bearings. Such as: high-speed bearings, high-temperature bearings, corrosion-resistant bearings, anti-magnetic bearings, electrical insulation bearings, etc.(1) High-speed bearing: It has the advantages of cold resistance, small force elasticity, high pressure resistance, poor thermal conductivity, light weight, and small friction coefficient. It can be applied to high-speed spindles at 12,000 rpm to 75,000 rpm and others In high-precision equipment;(2) High temperature resistant bearing: The material itself is resistant to high temperature of 1200oC, and it is self-lubricating. The use temperature is between 100oC and 800oC without expansion caused by temperature difference. It can be used in furnaces, plastics, steel and other high-temperature equipment;(3) Corrosion-resistant bearings: The material itself has corrosion-resistant properties and can be used in fields such as strong acids, strong alkalis, inorganic, organic salts, seawater, etc., such as: electroplating equipment, electronic equipment, chemical machinery, shipbuilding, medical equipment, etc. .(4) Antimagnetic bearing: Because it is non-magnetic and does not absorb dust, it can reduce the bearing peeling off in advance and loud noise. Can be used in demagnetization equipment. Precision instruments and other fields.(5) Electrically insulated bearings: Because of their high electrical resistance, they can avoid arc damage to the bearings and can be used in various electrical equipment requiring insulation.(6) Vacuum bearings: Due to the unique oil-free and self-lubricating characteristics of ceramic materials, it can overcome the problem that ordinary bearings cannot achieve lubrication in an ultra-high vacuum environment.Note: For the above five types of bearings provided by our company, the same set of bearings can be used in high temperature, high speed, acid-base, magnetic field, non-insulation, but the material properties are different (please refer to the performance table of rare earth ceramic materials). When the customer chooses the product, he informs the company where it is applied, and we will select the ceramic bearing with the most suitable material for you.3. List of bearing models(1) Deep groove ball bearings (technical grade: P4, P5, P6, P0)Deep groove ball bearings, the most representative rolling bearings, have a wide range of uses and can withstand radial loads and bidirectional axial loads. It is suitable for high-speed rotation, low noise and low vibration occasions, or high temperature, high cold, corrosion, magnetic field, non-insulation and other fields where steel bearings cannot be used.(2) Self-aligning ball bearingsThe raceway of the outer ring of the self-aligning ball bearing is spherical and self-aligning, which can supplement the error caused by the misalignment and shaft deflection. It is used to produce non-concentric or shaft deflection parts between the shaft and the shell and the alignment parts required by high temperature, low cold, corrosion, and magnetic field non-insulation.Note: The inclination cannot exceed 3 degrees.(3) Single row angular contact ball bearings (technical grade: P4, P5, P6, P0)Angular contact bearings are suitable for high-speed and high-precision rotation. They do not affect their accuracy in high temperature, magnetic field, water, etc., and can withstand composite loads. The standard contact angles are 15°, 30° and 40°. The larger the contact angle, the greater the axial load capacity, and the smaller the contact angle. The bearing can withstand radial load and unidirectional axial load. Generally adopted in pairs installation. Please pay attention when purchasing.(4) One-way thrust ball bearingThe one-way thrust ball bearing is composed of a washer-shaped ring with a ball rolling raceway and a cage assembled with the ball. Can bear axial load, but cannot bear radial load.4. Characteristics of ceramic bearing materials(1) (Please refer to the table of common bearing materials performance)(2) Compared with the performance of bearing steel, its own weight is 30%-40% of bearing steel, which can reduce the increase of dynamic body load and slip caused by centrifugal force. Because of the high wear resistance, the speed is 1.3 to 1.5 times that of bearing steel, which can reduce the surface damage of the channel caused by high-speed rotation. The modulus of elasticity is 1.5 times higher than that of bearing steel. The force elasticity is small, which can reduce the deformation caused by the high load. The hardness is 1 times that of bearing steel, which can reduce wear. Compression resistance is 5-7 times that of bearing steel. The coefficient of thermal expansion is less than 20% of bearing steel. The friction coefficient is less than 30% of the bearing steel, which can reduce the heat generated by friction and reduce the bearing failure due to high temperature. The tensile and bending resistance are the same as metal.5. Installation of ceramic bearingsThe inner diameter and outer diameter of the ceramic bearings produced by our company are the standard sizes of P4, P5, P6 grades of steel bearings established by the country. Due to the low coefficient of thermal expansion of ceramic materials, small heat transfer performance, and small elasticity, attention should be paid to the installation and coordination. If you are unsure, please consult our company when you can buy the product, and I will choose the appropriate fit tolerance for you.This street light features high brightness, energy saving, environmental protection, and easy installation. It has a waterproof rating of IP67 and has passed CE certification. It is suitable for schools, parks, roadsides, factories, squares, etc. It has a warranty period of 3 years. Moreover, we can provide various styles to meet your needs.Self-Aligning Ball Bearing Selection TableNumberDimentions (mm)Mounting Dimentions( mm)Reference WeightdaDara(kg)dDBr (min)minmaxmaxZrO2Si3N413551960.37170.30.0070.00412661960.38170.30.0070.00412772270.39200.30.0110.00610882270.310200.30.0110.00612992680.613220.60.0170.0091200103090.614260.60.0260.014220030140.614260.60.0360.019130025110.614310.60.0450.024230025170.614310.60.0650.03512011232100.616280.60.0310.016220132140.616280.60.0410.022130137121173210.0520.027230137171173210.0730.03912021535110.619310.60.0380.020220235140.619310.60.0460.025130242131203710.0720.039Company ProfileNanjing Jpg bearing & Equipment co ltdExcellent Manufacturer of bearings*The domentic Leading numerical control production equipment ensures the accuracy consisitency and stability of the products .*Advanced production equipment and high quality tecnician team ensure the quality of bearing products .*Advanced automation equipment ensure the quality of products while taking into account the production efficiency .Leading EquipmentRigorous TestingJPG Bearingis a comprehensive manufacture and service providers with world's leading bearing manufacture process and management technique in china. We are selling all kinds of ball and roller bearings products with international standard and technology level of low noise, high load and long life. Welcome to inquiry!Perfect precision testing equipment ,fullly meet the requirements of bearing R&D and manufacturing .Strict and rigourour quality inspectors strictly abide by product quality standards and strictly control the whole process of products from test to prodution. High -ending tessing equipment ,professional operation technicians and rigorous procrssing procedures an the guarantee of qualityFAQ1. Can I get some samples?A: Yes, sample is available for quality check and market test.2. Can we do our logo or brand on the package?A: Yes, we can do OEM.3. What's the delivery time?A: It usually takes about 10-25 working days for production based on specifications for your order and quantity.4. What's your payment terms?A: We usually accept T/T or L/C at sight as the main paymentterms, an d other payment can also be negotiated.5. What's your warranty terms?A: We offer different warranty time for different components,please contact us for detailsPayment:1. Less than 1000 pcs , 100% T/T, Western Union in advance.2. Between 1000-10000pcs, TT, Western Union, MoneyGram.3. More than 10000pcs , TT, L/C ,Western Union, MoneyGram.Dealing Process:Send us inqry---------Quotation-----------Confirmation for all information----------Proforma Invoice-------------Payment-----------Shipping goods and documents.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.