IPDB › China Industry › Industrial Equipment & Components › Bearing
Hf, Hfl, FC, Fcb, RC, Rcb One-Way Needle Roller Bearings1
Needle Bearing, Hfl, FC, Fcb, RC, Rcb One-Way Needle Roller Bearings, Bearing, Needle Bearing
Nanjing JPG Bearing & Equipment Co., Ltd.
Preview:
Product Description Product Description Product detailsDrawn cup needle roller clutches are commonly known as one-way bearings or one-way needle roller bearings. They are thin-walled outer rings, cages, springs and needle rollers that are stretched from alloy plates and are unidirectionally moving bearings that can be used as a conversion Detectors, non-return devices, overrunning clutches are widely used in fitness equipment, currency counters, washing machines, fishing gear, toy cars and other transmission parts that need to play a backstop role.Drawn cup needle roller clutches (one-way bearings) can be used as converters, non-return devices, and overrunning clutches. HF (Needle Roller Clutch): It is composed of a stamped outer ring and a plastic cage; the cage can be equipped with plastic reeds or stainless steel reeds to guide the needles. The inclined raceways and needles on the outer ring are used as locking devices. HFL (Clutch and Bearing Assembly): The supporting bearing is installed on both sides of the needle roller clutch and bears radial load. As the supporting bearing, the needle roller and plastic cage assembly are used.main feature:One-way movement, reverse locking;High conversion frequency and conversion accuracy.The structure is shown in the following table:Metric size Inch size Structure descriptionHF, FC RC, HFZ stainless steel springs,HFL, FCB RCB, HFLZ stainless steel springs, with supporting bearings on both sidesHF.R,HFL.R stainless steel spring, knurled outer ringHF.KF,HFL.KF plastic springHF.KFR,HF.KFR plastic spring, knurled outer ringEWC, 1WC external hexagonOuter ringMaterial: Generally ST14 low carbon steelProcessing: punching or drawing by hydraulic pressHeat treatment: carburizing, high frequency temperingCageMaterial: Increase nylon PA66Processing: injection molding machineHeat treatment: noneRoller pinMaterial: GCr15 bearing steelProcessing: Grinding by a grinderHeat treatment: quenching HRc60-64Spring leafMaterial: resin or stainless steelShaft Diameter Mass Approx Torgue Ma 1 Clutch DesignationBorndary DimensionsLimiting SpeedSuitable Drawn Cup Bearings FwDCRotating Shaft Min-1Rotatng Outer Ring Min-1 mmPlastic SpringsSteel SpringsgmmNmrpm HF 3HF0306KF 0.936.560.2360007000HK0306TN 4HF0406KF--14860.34340008000HK0408TN HF0406KFR--14860.1340008000HK0408TN 6HF0608KF 2.861081.52000011000HK0608 HF0612KFHF06123610121.762300013000HK0608 HF0612KFRHF0612R3610121.762300013000HK0608 HF0612103.56121032000013000HK061208 8HF0812KFHF08123.5812123.151700012000HK0808 HF0812KFRHF0812R3.58121241700012000HK0808 --HF0612103.28121031600012000HK0808 --HF0814103.6814104.61500011000HK081410 --HF0816104.1816105.51500011000HK081610 --HF08141248141251600012000HK081410 10HF1012KFHF101241014125.31400011000HK1010 HF1012KFRHF1012R41014121.51400011000HK1010 12--HF12161112181612.2110008000HK1212 14--HF14161314201617.395008000HK1412 16--HF16161416221620.585007500HK1612 18--HF18161618241624.175007500HK1812 20--HF20161720261628.570006500HK2010 25--HF2520302532206655005500HK2512 30--HF3020363037209045004500HK3012 35--HF35204035422012139003900HK3512 Note 1: One-way bushings and cages are made of nylon; KF means that the springs on the cage are made of nylon, and no KF means that the springs on the cage are stainless steel;Note 2: R means that the outer ring of the bearing is knurled to increase the bite force; Shaft Diameter Mass Approx Torgue Ma 1Basic Load RatingsClutch DesignationBorndary DimensionsLimiting Speed FwDCRotating Shaft Min-1Rotatng Outer Ring Min-1CCoPlastic SpringsSteel SpringsKNmm gmmNmrpmHFL 3HFL0308--333.681--------4HFL0408--3.54881.5--------6HFL0615KFHFK06154610151.762300013000----HFL0615KFRHFL0615R4610150.52300013000------HFL061012K561012--2100012000----8--HFL081212K681212--2000012000------HFL081412K781412--1900012000----HFL0822KFHFL08227812223.1517000120004.054.15HFL0822KFRHFL0822R78122211700012000----10HFL1022KFHFL102281014225.314000110004.34.65HFL1022KFRHFL1022R81014221.51400011000----12--HFL12261812182612.21100080006.36.514--HFL14262014202617.3950080007.17.716--HFL16262216222620.5850075007.7918--HFL18262518242624.1750075008.310.320--HFL20262720262628.5700065008.911.525--HFL253044253230665500550010.914.130--HFL303051303730904500450012.617.635--HFL353058354230121390039001319.3 FwDC Torrington/ & NSK/ FC4K14860.34 FC63610121.76 FC6K3610121.76 FC84814125.3 FCL8K3.5812125 FC104.81016126 FCL10K41014125.3 FC121112181612.2 FC14K1314201617.3 FC161416221620.5 FC201720261628.5 FC253025322066 FC303630372090 FC3540354220121 FCB8101414205 FCB101516162010 FCB121818182612.2 FCB162222222620.5 FCB202726262628.5 FCB254432323066 FCB305137373090 FCB3558424230121 FwDC Torrington/ & NSK/ RC0407083.56.3511.11212.71.9 RC040708-FS3.56.3511.11212.71.9 RC0610084.79.52515.87512.74.83 RC061008-FC4.79.52515.87512.74.83 RC0812089.212.719.0512.77.9 RC081208-FS9.212.719.0512.77.9 RC10141014.515.87522.22515.8815.4 RC101410-FC14.515.87522.22515.8815.4 RC1216101719.0525.415.8820.9 RC121610-FS1719.0525.415.8820.9 RC16211016.225.433.33815.8845 RC162110-FC16.225.433.33815.8845 RCB061014129.52515.87522.224.83 RCB061014-FS129.52515.87522.224.83 RCB0812141612.719.0522.227.9 RCB081214-FC1612.719.0522.227.9 RCB10141621.315.87522.22525.415.4 RCB101416-FS21.315.87522.22525.415.4 RCB12161626.519.0525.425.420.9 RCB121616-FC26.519.0525.425.420.9 RCB16211744.825.433.33826.9945 RCB162117-FS44.825.433.33826.9945 boundary dimensions shaft dia.torque capacity dFwD1D2BA mmmmN.m (.)Kg.cm(.) 4488.462.60.080.82 488.462.60.151.53 661010.482.80.252.55 61010.482.80.444.49 61010.482.80.444.49 61010.4122.80.888.98 881212.492.60.495 81212.492.60.888.98 814.215123.61.1812.04 814.215123.61.9620 814.215123.61.9620 814.21514.53.62.6527.04 101016171051.1812.04 1016171051.9620 1016171251.3713.98 1016171252.3523.98 1016171252.3523.98 12121819165.16.2864.08 Company ProfileNanjing JPG bearing & Equipment co ltdExcellent Manufacturer of bearings*The domentic Leading numerical control production equipment ensures the accuracy consisitency and stability of the products .*Advanced production equipment and high quality tecnician team ensure the quality of bearing products .*Advanced automation equipment ensure the quality of products while taking into account the production efficiency .LeadingJPG Bearingis a comprehensive manufacture and service providers with world's leading bearing manufacture process and management technique in china. We are selling all kinds of ball and roller bearings products with international standard and technology level of low noise, high load and long life. Welcome to inquiry! Main products 1.Taper roller bearing2.Deep groove ball bearing3.cylindrical roller bearing3.spherical roller bearing4.linear bearing5.pillow block bearing6 OEM all knid of famous brand7. Non-standard bearing Quality TestingRigorous Testing Perfect precision testing equipment ,fullly meet the requirements of bearing R&D and manufacturing .Strict and rigourour quality inspectors strictly abide by product quality standards and strictly control the whole process of products from test to prodution. High -ending tessing equipment ,professional operation technicians and rigorous procrssing procedures an the guarantee of qualitywith the unremitting purcuit of perfec products ,the company has established the industry's top testing laboratory ,sound quality control rules,and a well -trained professional testing team.Every process from raw materials of finished products is sticklty tested to ensure high quality products. Delivere to the customer . Packaging & ShippingPackaging:1. Neutral Package: Plastic Bag + Carton + Pallet;2. Commercial Package: Plastic Bag + Box + Carton + Pallet;3. As the clients' requirement.Delivery:1. Less than 1000 pcs , we will send by express. ( Door to Door, Convenient ),or by air transport. ( Fastest and safest, but expensive )2. More than 1000pcs , we will send by sea. ( Cheapest, safe )FAQFAQ1. Can I get some samples?A: Yes, sample is available for quality check and market test.2. Can we do our logo or brand on the package?A: Yes, we can do OEM.3. What's the delivery time?A: It usually takes about 10-25 working days for production based on specifications for your order and quantity.4. What's your payment terms?A: We usually accept T/T or L/C at sight as the main paymentterms, an d other payment can also be negotiated.5. What's your warranty terms?A: We offer different warranty time for different components,please contact us for detailsPayment:1. Less than 1000 pcs , 100% T/T, Western Union in advance.2. Between 1000-10000pcs, TT, Western Union, MoneyGram.3. More than 10000pcs , TT, L/C ,Western Union, MoneyGram.Dealing Process:Send us inqry---------Quotation-----------Confirmation for all information----------Proforma Invoice-------------Payment-----------Shipping goods and documents.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.