IPDB › China Industry › Industrial Equipment & Components › Bearing
Lmek-Uu Flange Linear Motion Bearing with Ball1
Linear Bearing, Flange Linear Motion Bearing, Flange Linear Motion Ball Bearing
NINGBO CIE INDUSTRY AND TRADE CO., LTD.
Preview:
Product Description LMEK-UU Flange Linear Motion Bearing with BallThe square flange type linear bearing mainly consists of sleeve, ball, seal, nylon cage and square flange. Among them, the flange plays a fixing role. During installation, the coordinated equipment should have high bore accuracy.The product is finely processed enjoying low coefficient of friction. This also allows it make almost no noise during working. Due to the reasonable design, the flange has good stability. In addition, the product also features high working accuracy. With easy replacement, it has been widely used in CNC machine tools, printers, power tools, sports equipment, multi-axis machine tools, and so on.The sub-categories of this product are almost similar in the appearance and functionality. However, LMK, LMEK, and LMBK series are produced in accordance with the standards in Asia, Europe, and the Americas. With a wide range of size selection, it can be suitable for different machines. In addition, UU type is a common square flange type linear bearing, while the LUU type refers to the lengthened one.The LMK-UU square flange linear bearing available in the metric size can be commonly found in the Asian market.Technical ParametersNominal shaft dia. mmResin retainerEccentricity μmSquareness μmBasic load ratingSquare flange type LMK...UUWeight (gf)Dynamic C NStatic Co N6LMK6UU1812122062658LMK8SUU241762168LMK8UU2927439210LMK10UU5237254912LMK12UU5751078413LMK13UU7251078416LMK16UU104774118020LMK20UU1451515882137025LMK25UU300980157030LMK30UU3751570274035LMK35UU56020201670314040LMK40UU8802160402050LMK50UU2,0003820794060LMK60UU2,560252547001000080LMK80UU5,300735016000100LMK100UU9,90030301410034800 Major dimensions and tolerance(T)mmdrmmDmmLFlangeTolerance μmT μmT μmDf mmK mmt mmDp mmX mmY mmZ mm60 -9120 -1119±30028225203.563.18151732255243.563.18152432255543.563.110190 -13290 -20040306294.57.54.112213042326324.57.54.113233243346334.57.54.116283748376384.57.54.1200 -10320 -164254428435.595.12540590 -30062508515.595.1304564745810606.6116.1350 -12520 -1970826410676.6116.1406080967513789148.150801001169213989148.1600 -15900 -2211013410618112111711.1801201400 -40016413618142111711.11000 -201500 -2517520017020175142013.1 the LMEK-UU flange linear motion bearing adopts the metric size and finds wide use in Europe.Technical ParametersNominal shaft dia. mmSquare flange type LMEF...UUWeight (gf)Eccentricity μ mSquareness μ mBasic load rating Dynamic C NStatic Co N 5LMEK5UU201212206265 8LMEK8UU33265402 12LMEK12UU64510784 16LMEK16UU90578892 20LMEK20UU14715158621,370 25LMEK25UU2959801,570 30LMEK30UU4651,5702,740 40LMEK40UU97517172,1604,020 50LMEK50UU15453,8207,940 60LMEK60UU278020204,7009,800 80LMEK80UU59207,35016,000 Major dimensions and tolerancemmdrmmDmmLFlangeTolerance μ mTolerance μ mTolerance μ mDf mmK mmt mmDp mmX mmY mmZ mm5+8 0120 -822±30028225203.563.18162532255243.563.112220 -9320 -20042326324.57.54.116+9 -1263646356364.57.54.120320 -114554428435.595.125+11 -140580 -30062508515.595.1304768766010626.6116.140+13 -2620 -1380987513809148.150751001128813949148.160900 -151250 -40013410618112111711.180+16 -412016516413618142111711.1 The LMBK-UU flange linear bushing using the inch size is widely adopted in the Americas.Technical ParametersNominal shaft dia. inch/mmSquare flange type LMBK...UUWeight (gf)Eccentricity inch/μmSquareness inch/μmBasic load rating Dynamic C NStatic Co N 1/4 6.350LMBK4UU250.0005 120.0005 12206265 3/8 9.525LMBK6UU32225314 1/2 12.700LMBK8UU68510784 5/8 15.875LMBK10UU1247741,180 3/4 19.050LMBK12UU1500.0006 150.0006 158621,370 1 25.400LMBK16UU2809801,570 1-1/4 31.750LMBK20UU5800.0008 200.0008 201,5702,740 1-1/2 38.100LMBK24UU9302,1804,020 2 50.800LMBK32UU15800.0010 250.0010 253,8207,940 2-1/2 63.500LMBK40UU32004,70010,000 3 76.200LMBK48UU50007,35016,000 4 101.600LMBK64UU113000.0012 300.0012 3014,10034,800 Major dimensions and toleranceinch mmdrinch mmDinch mmLFlangeTolerance inch/μmTolerance inch/μmTolerance inch/μmDf inch mmK inch mmt inch mmDp inch mmX inch mmY inch mmZ inch mm0.2500 6.3500 -0.00040 0 -90.5000 12.7000 -0.00045 0 -110.7500 19.050±0.012 ±3001.2500 31.7501.0000 25.4000.219 5.5560.8750 22.2250.1560 3.9690.2500 6.3500.1410 3.5720.3750 9.5250.6250 15.8750 -0.00050 0 -130.8750 22.2251.5000 38.1001.2500 31.7500.2500 6.3501.0620 26.9880.1875 4.7630.2970 7.5410.1720 4.3660.5000 12.7000.8750 22.2251.2500 31.7500 -0.008 0 -2001.7500 44.4501.3750 34.925.2500 6.3501.312 33.3380.1875 4.7630.2970 7.5410.1720 4.3660.6250 15.8751.1250 28.5751.500 38.1002.0000 50.8001.5000 38.1000.2500 6.3501.5620 39.6880.1875 4.7630.2970 7.5410.1720 4.3660.7500 19.0500 -0.00040 0 -101.2500 31.7500 -0.00065 0 -161.6250 41.2752.1875 55.5631.6875 42.8630.3125 7.9381.7180 43.6600.2187 5.5560.3440 8.7310.2030 5.1591.0000 25.4001.5625 39.6882.2500 57.1500 -0.012 0 -3002.5000 63.5002.0000 50.8000.3125 7.9382.0310 51.5940.2187 5.5560.3440 8.7310.2030 5.1591.2500 31.7500 -0.00050 0 -122.0000 50.8000 -0.00075 0 -192.6250 66.6753.1250 79.3752.5000 63.5000.3750 9.5252.5625 65.0880.2812 7.1440.4060 10.3190.2656 6.7471.5000 38.1002.3750 60.3253.0000 76.2003.7500 95.2503.0000 76.2000.5000 12.7003.0625 77.7880.3440 8.7310.5000 12.7000.3280 8.3342.0000 50.8003.0000 76.2000 -0.00090 0 -224.0000 101.6004.3750 111.1253.5000 88.9000.5000 12.7003.6875 93.6620.3440 8.7310.5000 12.7000.3280 8.3342.5000 63.5000 -0.00060 0 -153.7500 95.2505.0000 127.0005.3750 136.5254.3750 111.1250.7500 19.0504.5625 115.8870.4062 10.3190.6250 15.8750.3750 9.5253.0000 76.2004.5000 114.3006.0000 152.4000 -0.016 0 -4006.1250 155.5755.0000 127.0000.7500 19.0505.3125 134.9370.4062 10.3190.6250 15.8750.3750 9.5254.0000 101.6000 -0.00080 0 -206.0000 152.4000 -0.00100 0 -258.0000 203.2008.0000 203.2006.7500 171.4500.8750 22.2257.0000 177.8000.5000 12.7000.7125 18.0970.5000 12.700 The LMK-LUU square flange long linear bearing is extensively used in Asia because of its metric dimensions.Technical ParametersNominal shaft dia. mmSquare flange long type LMK...LUUWeight (gf)Eccentricity μmSquareness μmBasic load rating Dynamic C NStatic Co N 6LMK6LUU251515323529 8LMK8LUU43431784 10LMK10LUU785881,100 12LMK12LUU908131,570 13LMK13LUU1088131,570 16LMK16LUU1651,2302,350 20LMK20LUU22520201,4002,740 25LMK25LUU5001,5603,140 30LMK30LUU5902,4905,490 35LMK35LUU93025252,6506,270 40LMK40LUU13803,4308,040 50LMK50LUU34006,08015,900 60LMK60LUU406030307,55020,000 Major dimensions and tolerancemmdrmmDmmLFlangeTolerance μmTolerance μmTolerance μmDf mmK mmt mmDp mmX mmY mmZ mm60 -10120 -1335±30028225203.563.18154532255243.563.110190 -165540306294.57.54.11221570 -30042326324.57.54.113236143346334.57.54.116287048376384.57.54.1200 -12320 -198054428435.595.125401120 -40062508515.595.13045123745810606.6116.1350 -15520 -22135826410676.6116.14060151967513789148.150801921169213989148.1600 -20900 -2520913410618112111711.1 The sizes of our LMEK-LUU flange long linear motion bearing are measured in metric units. Hence, the product has found wide use in Europe.Technical ParametersNominal shaft diameter mmSquare flange long type LMEK...LUUWeight (gf)Eccentricity μmSquareness μmBasic load rating Dynamic C NStatic Co N 8LMEK8LUU511515421804 12LMEK12LUU908131,570 16LMEK16LUU1359121,780 20LMEK20LUU22517171,3702,740 25LMEK25LUU5001,5703,140 30LMEK30LUU7202,5005,490 40LMEK40LUU160020203,4308,040 50LMEK50LUU26206,08015,900 60LMEK60LUU448025257,55020,000 Major dimensions and tolerancemmdrmmDmmLFlangeTolerance μmTolerance μmTolerance μmDf mmK mmt mmDp mmX mmY mmZ mm8+9 -1160 -946±30032255243.563.112220 -11610 -30042326324.57.54.116+11 -1266846356364.57.54.120320 -138054428435.595.125+13 -2401120 -40062508515.595.13047123766010626.6116.140+16 -4620 -15151987513809148.150751921128813949148.160900 -2020913410618112111711.1 The LMBK-LUU flange double linear bushing adopts inch sizes and well adapts to the machines in the Americas.Technical ParametersNominal shaft dia. inch/ mmSquare flange long type LMBK...LUUWeight (gf)Eccentricity inch/μmSquareness inch/μmBasic load rating Dynamic C NStatic Co N 1/4 6.350LMBK4LUU330.0006 150 .0006 15323530 3/8 9.525LMBK6LUU45353630 1/2 12.700LMBK8LUU1068131,570 5/8 15.875LMBK10LUU2001,2302,350 3/4 19.050LMBK12LUU2400.0008 200.0008 201,3702,740 1 25.400LMBK16LUU4701,5703,140 1-1/4 31.750LMBK20LUU9350.0010 250.0010 252,5005,490 1-1/2 38.100LMBK24LUU14603,4308,040 2 50.800LMBK32LUU26200.0012 300.0012 306,08015,900 Major dimensions and toleranceinch mmdrinch mmDinch mmLFlangeTolerance inch μmTolerance inch μmTolerance inch μmDf inch mmK inch mmt inch mmDp inch mmX inch mmY inch mmZ inch mm0.2500 6.3500 -0.00040 0 -100.5000 12.7000 -0.00050 0 -131.3750 34.925±0.012 ±3001.2500 31.7501.0000 25.4000.219 5.5560.8750 22.2250.1563 3.9690.2500 6.3500.1406 3.5720.3750 9.5250.6250 15.8750 -0.00065 0 -161.5938 40.4811.5000 38.1001.2500 31.7500.2500 6.3501.0620 26.9880.1875 4.7630.2969 7.5410.1719 4.3660.5000 12.7000.8750 22.2252.3750 60.3250 -0.012 0 -3001.7500 44.4501.3750 34.9250.2500 6.3501.312 33.3380.1875 4.7630.2969 7.5410.1719 4.3660.6250 15.8751.1250 28.5752.8125 71.4382.0000 50.8001.5000 38.1000.2500 6.3501.5620 39.6880.1875 4.7630.2969 7.5410.1719 4.3660.7500 19.0500 -0.00050 0 -121.2500 31.7500 -0.00075 0 -193.0937 78.5812.1875 55.5631.6875 42.8630.3125 7.9381.7180 43.6600.2188 5.5560.3439 8.7310.2031 5.1591.0000 25.4001.5625 39.6884.2831 108.7440 -0.016 0 -4002.5000 63.5002.0000 50.8000.3125 7.9382.0310 51.5940.2188 5.5560.3438 8.7310.2031 5.1591.2500 31.7500 -0.00065 0 -162.0000 50.8000 -0.00090 0 -225.0000 127.0003.1250 79.3752.5000 63.5000.3750 9.5252.5625 65.0880.2813 7.1440.4063 10.3190.2656 6.7471.5000 38.1002.3750 60.3255.6875 144.4633.7500 95.2503.0000 76.2000.5000 12.7003.0625 77.7880.3437 8.7310.5000 12.7000.3281 8.3342.0000 50.8003.0000 76.2000 -0.00100 0 -257.7500 196.8504.3750 111.1253.5000 88.9000.5000 12.7003.6875 93.6620.3437 8.7310.5000 12.7000.3281 8.334 The LMBK-LUU flange double linear bushing adopts inch sizes and well adapts to the machines in the Americas.Technical ParametersNominal shaft dia. inch/ mmSquare flange long type LMBK...LUUWeight (gf)Eccentricity inch/μmSquareness inch/μmBasic load rating Dynamic C NStatic Co N 1/4 6.350LMBK4LUU330.0006 150 .0006 15323530 3/8 9.525LMBK6LUU45353630 1/2 12.700LMBK8LUU1068131,570 5/8 15.875LMBK10LUU2001,2302,350 3/4 19.050LMBK12LUU2400.0008 200.0008 201,3702,740 1 25.400LMBK16LUU4701,5703,140 1-1/4 31.750LMBK20LUU9350.0010 250.0010 252,5005,490 1-1/2 38.100LMBK24LUU14603,4308,040 2 50.800LMBK32LUU26200.0012 300.0012 306,08015,900 Major dimensions and toleranceinch mmdrinch mmDinch mmLFlangeTolerance inch μmTolerance inch μmTolerance inch μmDf inch mmK inch mmt inch mmDp inch mmX inch mmY inch mmZ inch mm0.2500 6.3500 -0.00040 0 -100.5000 12.7000 -0.00050 0 -131.3750 34.925±0.012 ±3001.2500 31.7501.0000 25.4000.219 5.5560.8750 22.2250.1563 3.9690.2500 6.3500.1406 3.5720.3750 9.5250.6250 15.8750 -0.00065 0 -161.5938 40.4811.5000 38.1001.2500 31.7500.2500 6.3501.0620 26.9880.1875 4.7630.2969 7.5410.1719 4.3660.5000 12.7000.8750 22.2252.3750 60.3250 -0.012 0 -3001.7500 44.4501.3750 34.9250.2500 6.3501.312 33.3380.1875 4.7630.2969 7.5410.1719 4.3660.6250 15.8751.1250 28.5752.8125 71.4382.0000 50.8001.5000 38.1000.2500 6.3501.5620 39.6880.1875 4.7630.2969 7.5410.1719 4.3660.7500 19.0500 -0.00050 0 -121.2500 31.7500 -0.00075 0 -193.0937 78.5812.1875 55.5631.6875 42.8630.3125 7.9381.7180 43.6600.2188 5.5560.3439 8.7310.2031 5.1591.0000 25.4001.5625 39.6884.2831 108.7440 -0.016 0 -4002.5000 63.5002.0000 50.8000.3125 7.9382.0310 51.5940.2188 5.5560.3438 8.7310.2031 5.1591.2500 31.7500 -0.00065 0 -162.0000 50.8000 -0.00090 0 -225.0000 127.0003.1250 79.3752.5000 63.5000.3750 9.5252.5625 65.0880.2813 7.1440.4063 10.3190.2656 6.7471.5000 38.1002.3750 60.3255.6875 144.4633.7500 95.2503.0000 76.2000.5000 12.7003.0625 77.7880.3437 8.7310.5000 12.7000.3281 8.3342.0000 50.8003.0000 76.2000 -0.00100 0 -257.7500 196.8504.3750 111.1253.5000 88.9000.5000 12.7003.6875 93.6620.3437 8.7310.5000 12.7000.3281 8.334 As a professional standard linear bearing manufacturer and supplier in China, we also offer adjustable type linear bearing, round flange mount linear bearing, SC-UU slide block, SHF horizontal shaft support, and much more. The LM-UU linear motion bearing is manufactured in line with Asia's mechanical standards, so that it is suitable for use in Asia. The products we offer include many models with the applicable shaft nominal diameter ranging from 3mm to 150mm. They differ in the main dimensions and tolerances, the degree of eccentricity, the maximum radial clearance, and the rated load. Therefore, this linear bearing for Asia market can be used in different sizes and models of machinery, serving to reduce friction and extend life of the equipment.Our workroom of linear ball bearing at a glance:QUALITY POLICYLead By Technology, Keep ImprovingBenchmarking, Creating Brand QUALITY OBJECTIVESFinished Product First Inspection Pass Rate: 100%Customer Satisfaction: ≥ 95;Zero-defect delivery of products: 0ppmThe right tool for the right job. We're always working hard to improve our " tools" to win the market. Because of this,production efficiency and quality would be improved, expand the competitive advantage, and win the markeWide Application of our Linear ball bearingfor example:We attended some professional fair in China and Abroad at a glance:
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.