IPDB › China Industry › Industrial Equipment & Components › Bearing
Wind Turbine Slewing Bearing Wind Generator Bearing Slewing Ring Bearings1
Slewing Bearing, Wind Turbine Bearing, Wind Generator Bearing
Luoyang Longda Bearing Co., Ltd.
Preview:
Product DescriptionWind Generator bearing, wind turbine bearingStructure of Yaw and Pitch BearingGenerally, yaw and pitch bearing stuctures are single row ball slewing rings four-point contact bearing and double row ball slewing ring four-point contact bearing. And both these two types of bearings can be further divided into bearings without gears, bearings with internal gears, bearings with outer gears according to gear position.Material and heat treatmentRolling elements in yaw and pitch bearing are made of GCr15 or GCr15SiMn bearing steel according to GB/T 18254-2002. Their heat treatment should comply with JB/T 1255-2001. Other materials with similar or better properties can also be used.The material of rings in yaw and pitch bearing is 42CrMo or others that meets technique requirements according to GB/T3077-1999. Hardness after hardening and quenching should be 229HB~269HB, for raceway after quenching 55HRC~62HRC. The effect hardened thickness of race way should meet the requirement.Tolerance and clearanceGeneraly radial and axial clearance of yaw bearing is0~50μ M. They can be adjusted according to customer requirement. Radial and axial clearance of pitch bearing is less than 0.Starting torquePlease consult with Technique Department of our companyLubrication holeYaw and pitch bearings is lubricated through lubrication hole, which is screwed hole with M10X1SealFow yaw and pitch bearing, seal material should be NBR according to HG/T 2811-1996 or better material. We use world famous seal with good performance and reliable quality for our pitch and yaw bearing.Spacer and cageYaw bearing of our company has spacers that are self-lubricated and can compensate for lubrication when lubrication oil is unevenly distributed in order to maintain best lubrication status between balls and groove contact areas.Our pitch bearing uses integrated steel cage which has simple structure and can save space and accommodate more balls to increase load capacity. Compared with traditional segmented cage, integrated cage is easier to assemble and more stable and reliable.Preservative treatmentFor yaw and pitch bearing, except for groove and gear all other surfaces should be applied thermal spraying anti-corrosion treatment according to GB/T9793-1997 and GB/T8427-1996. When applied zinc coating, the thickness of anti-corrosion should be no less than 160μ M. Other anti-corrosive treatment shall be applied if it meets performance requirements of machine.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.