IPDB › China Industry › Industrial Equipment & Components › Bearing
China Manufacturer of Large Size Wind Power Bearing 010.40.10001
Cylindrical Roller Bearing, Wind Turbine Slewing Bearing, Special Yaw and Pitch Bearing
Luoyang Bearing Research Institute Co., Ltd.
Preview:
Product Description China manufacturer of Large Size Wind Power Bearing 010.40.1000Product DescriptionGenerally, yaw and pitch bearing usually adopt the structure of single row four-point contact ball bearing and double row four-point contact ball bearing. And both these two types of bearings can be further divided into bearings without gears, bearings with internal gears, bearings with outer gears according to gear position.Product ParametersTechnical requirement of Yaw and Pitch bearings for wind turbine:1. Material and heat treatmentRolling elements in yaw and pitch bearing are made of GCr15 or GCr15SiMn bearing steel according to GB/T 18254-2002. The heat treatment of bearing steel should comply with JB/T1255-2001. Other materials with comparable or better performance can also be used. The material of rings in yaw and pitch bearing usually use 42CrMo that comply with GB/T30771999 standards or other materials which meet the performance requirements. The low-temperature impact energy requirement of the ring is -40oCAKV, not less than 27J.The flaw detection of the ring of the yaw and pitch slewing bearing is not lower than the level II requirements in the GB/T7736-2001 standard. After quenching and tempering, the hardness of ring is 229HB-269HB or determined by negotiation between the supplier and the buyer. The quenching hardness of the raceway surface is 55HRC-62HRC. The width of the soft belt of the yaw and pitch slewing bearing should not be greater than the diameter of the plunger hole plus 35mm. The soft belt should generally be placed in the raceway position of the plunger hole.2. Ring gear of the yaw and pitch slewing bearingRing gear in the yaw and pitch slewing bearing is mainly involute cylindrical gear with gear radial modification coefficient X=+0.5. Gear module should meet the regulations in GB/T1357-1987 standard. The accuracy of gear should not be lower than the requirements of 998GK in GB/T10095.1-2001 regulations.3. ClearanceGenerally the radial and axial clearance of yaw bearing is 0-50μm, and the clearance can be adjusted according to the customer requirements.The radial and axial clearance of pitch bearing is lower than 0. 4. Lubricating oil holeThe yaw bearing and pitch bearing are lubricated through lubricating oil hole, which is screw hole with the specification of M10×1.5. Seal For the yaw bearing and pitch bearing in wind turbines, the seal generally use NRB material which comply with HG/T2811-1996. ZYS uses the sealing ring of well-known foreign brands with good performance and reliable quality for our yaw bearing and pitch bearing.Because the wind turbine is exposed to the wild, there are strict requirements on the sealing performance of the yaw bearing and pitch bearing, and the seal form of the bearing must be optimized to ensure that the bearing life is the same as the wind turbine. Wind turbine are installed at an altitude of more than 50m or even hundreds of meters, and the cost of assembly and disassembly is expensive. Therefore, they must have very high reliability. Generally, they require 20 years of life. In addition, the bearing structure is complicated, so the requirements for design and manufacture of yaw bearing and pitch bearing are extremely high.6. Spacer and cageZYS yaw bearing for wind turbines has spacers that are self-lubricated and can compensate for lubrication when lubrication oil is unevenly distributed in order to maintain best lubrication status between balls and groove contact areas.ZYS pitch bearing for wind turbines uses integrated steel cage which has simple structure and can save space. It also can accommodate more balls to increase load capacity. Compared with traditional segmented cage, integrated cage is easier to assemble and more stable and reliable during operation.7. Preservative treatmentFor the yaw bearing and pitch bearing, all surfaces except the groove and gear should be applied thermal spraying anti-corrosion treatment according to the regulations in GB/T9793-1997 and GB/T8427-1996. When applied zinc coating, the thickness of anti-corrosion layer shall be no less than 160μm. Other anti-corrosion treatment can be applied to meet the performance requirements of the machine. Basic codeDimension of single row four point contact ball slewing bearingGear parameterExternal gearInternal gearWithout gearOuter gearInner gearDdTD1d1dnnHhbmDaZdaz010.30.560011.30.560013.30.560662458806264941820701060568913542786010.30.560012.30.560014.30.5606624588062649418207010606688.8112428.472010.30.630011.30.630013.30.6307325288069656418247010606772.8126494.483010.30.630012.30.630014.30.6307325288069656418247010608774.494491.262010.30.710011.30.710013.30.7108126088077664418247010606850.8139572.496010.30.710012.30.710014.30.7108126088077664418247010608854.4104571.272010.40.800012.40.800014.40.8009226781008787222230901080109689463464010.40.900011.40.900013.40.9001022778100978822223090108081062.4130739.293010.40.900012.40.900014.40.9001022778100978822223090108010106810473474010.40.1000011.40.1000013.40.100011228781001078922223690108010118811682483010.40.1000012.40.1000014.40.1000112287810010789222236901080121185.696820.869010.40.1120011.40.1120013.40.1120124299810011981042223690108010129812794495010.40.1120012.40.1120014.40.11201242998100119810422236901080121305.6106940.879010.45.1250011.45.1250013.45.1250139011101101337116326401001090121449.61181048.888010.45.1250012.45.1250014.45.1250139011101101337116326401001090141453.21011041.675010.45.1400011.45.1400013.45.1400154012601101487131326401001090121449.61181048.888010.45.1400012.45.1400014.45.1400154012601101487131326401001090141607.21121195.686010.45.1600011.45.1600013.45.1600174014601101687151326451001090141817.21271391.6100010.45.1600012.45.1600014.45.1600174014601101687151326451001090161820.81111382.487010.45.1800011.45.1800013.45.1800194016601101877171326451001090142013.21411573.6113010.45.1800012.45.1800014.45.1800194016601101877171326451001090162012.81231574.499010.60.2000011.60.2000013.60.20002178182514421101891334813212120162268.81391734.4109010.60.2000012.60.2000014.60.20002178182514421101891334813212120182264.41231735.297010.60.2240011.60.2240013.60.2240241820651442350213133481312120162492.81531990.4125010.60.2240012.60.2240014.60.2240241820651442350213133481312120182498.41361987.2111010.60.2500011.60.2500013.60.25002678232514426102391335613212120182768.41512239.2125010.60.2500012.60.2500014.60.250026782325144261023913356132121202027761362228112010.60.2800011.60.2800013.60.28002987262514429102691335613212120183074.41682527.2141010.60.2800012.60.2800014.60.280029872625144291026913356132121202030761512528127010.75.3150011.75.3150013.75.315033762922174328630144556162121502034761712828142010.75.3150012.75.3150014.75.31503376292217432863014455616212150223471.61552824.8129010.75.3550011.75.3550013.75.355037763322174368634144556162121502038761913228162010.75.3550012.75.3550014.75.35503776332217436863414455616212150223889.61743220.8147010.75.4000011.75.4000013.75.40004226377217441363864456016212150224329.61943660.8167010.75.4000012.75.4000014.75.400042263772174413638644560162121502543451713660147 Our AdvantagesZYS ADVANTAGES FOR Wind Turbine BearingsZYS has acquired the core designing, manufacturing and testing technique in yaw bearing, pitch bearing, main bearing, gearbox, and generating motor bearing in wind turbine system. We have also cultivated a professional team in bearing design, property analyses, manufacturing and testing. For example, cooperating with Xi'an Jiaotong University, we cultivated Chinese first wind turbine bearing major doctor and exploited specialized integrated design and analysis software that can conduct load spectrum analysis of wind turbine bearing, stress analysis, design and verification of key structural parameters, depth calculation of effective hardened layer and gear and bolt strength check etc. Properties of our wind turbine bearings have reached international advanced level. In 2001, the company became the first company that undertook the project of Nation Ministry of Science and Technology-"Development of key bearings for large and medium wind turbine generator". The company has acquired the core designing, manufacturing and testing technology in yaw bearing, pitch bearing, main bearing, gearbox, and generating motor bearing in wind turbine system. We have also cultivated a number of professional staff in wind bearing design, property analyses, manufacturing and testing. We cultivated the first post doctor in the field of wind power generator in China and developed specialized integrated design and analysis software that can conducts load spectrum analysis of wind turbine generator bearing, stress analysis, design and verification of key structural parameters, calculation of effective hardened layer depth and gear and bolt strength check etc. Properties of our wind turbine generator bearings have reached international advanced level. Up to now, we have applied many national patents in wind turbine generator bearing such as "slewing bearing for 1.0MW wind turbine generator", "slewing bearing for 1.5MW wind turbine generator", "self-lubricating cage for slewing bearing", "long life, high load three row roller combination slewing bearing", and "Intelligent wind turbine generator bearing based on Internet of things" etc. In particular, the exclusive patent of "Intelligent wind turbine generator bearing based on internet of things" can realize remote monitoring, fault warning and diagnosis.Detailed Photos Company ProfileZYS introduction Luoyang Bearing Research Institute Co., Ltd. is a high-tech enterprise specializing in the development of "high-rank, precise, advanced, unique, special" bearing products for the key units in various fields of national economic construction. Its predecessor, Luoyang Bearing Research Institute, was established in 1958. It is the only state-level comprehensive research institute in China's bearing industry. In 1999, it entered China National Machinery Industry Group Co., Ltd. and transformed into a science and technology enterprise.We have total assets of 2.06 billion RMB, own one research and development center, three industrial bases and cover an area of more than 47 hectares. We have advanced bearing manufacturing equipments and world first-class testing equipments and have solid strength in manufacturing, measuring and testing of bearing and related components with high precision and high reliability. We have more than 380 technical staff of bearing related disciplines, thus we maintain a leading position in the aspects of bearing design, basic theoretical research, lubrication technology, metallic and non-metallic materials, testing and industry standards. ZYS Glory Top 200 most promising companies of China in ForbesTop 500 in China Machinery IndustryExcellent Enterprise with China Well-know TrademarkHigh-performance Bearings LaboratoryState Quality Supervision and Testing Center for BearingISO/TC4 China SecretariatThe Research Center for High-speed Precision Bearing Engineering in Machinery Industry......We would like to and ready to do business with any company from all over the world. If you are interested in any of ZYS products, please don't hesitate to contact with us, we would like to give you ZYS best quality service any day any time ! Contact us Address: No.1 Jilin Road, Luoyang City, Henan, Province, China.Zip Code:471039 OTHER HOT SALE PRODUCTSHigh precision angular contact ball bearing Precision spindle bearingHybrid ceramic bearing Slewing bearingCylindrical roller bearing Needle roller bearingTaper roller bearing Precision lathe bearingBearing measuring instrument YRT rotary table bearingHigh-frequency spindles Dental drill bearingBearing ball Bearing making machine Material: GCr15,9Cr18,G20CrMo or others Certificate: GB/T19001-2000(ISO9001:2000), GJB/Z9001A-2001, GJB9001A-2001
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.