IPDB › China Industry › Tools & Hardware › Building Hardware
HDG Steel Bar Grating Stair Treads w/ Handi-Treads Non-Slip Stair Nosings1
Building Hardware, Stair Parts, Stair Treads, Grating Stair Treads
Hebei Tec-Sieve Wire Mesh Products Co., Ltd.
Preview:
Product Description Product DefinitionWhat is a steel bar grating stair tread?A steel bar grating stair tread is a series of bearing bars joined to perpendicular cross bars at various intervals to form a load-bearing panel designed for use as a step. Stair treads are manufactured with defined visible nosings and pre-punched end carrier plates or angles, ready for bolting or welding to the stair stringers.Product FeaturesWhich features do steel bar grating stair treads from Tec-Sieve embody?1. Steel bar grating stair treads from Tec-Sieve are available in carbon steel or stainless steel, and more often, carbon steel bar grating stair treads have a hot dipped / hot-dip galvanized finish.2. Steel bar grating stair treads from Tec-Sieve are available with a plain (flat or smooth) top surface, or a serrated non-slip top surface.3. In addition to the most widely used hot dipped galvanized finish, finishes also include mill (unpainted) and black primer.4. In order to greatly increase slip resistance of carbon steel smooth or serrated bar grating stair treads, our factory usually suggests our customers should procure steel bar grating stair treads, each of which comes with an antislip / nonslip nosing.The nosing is an angled plate, which is welded or bolted to the leading edge of a steel bar grating tread. Our nosing types include checker plate nosing, yellow abrasive nosing, and Perf-O nonslip metal nosing. Checker Plate NosingChecker plate nosing is also known as floor plate nosing, it is welded to the leading edge of a steel bar grating stair tread and provides increased slip resistance. The slip resistant checkered plate nosings are usually available with standard 1-1/4" width, 1-1/2'' width or 2'' width, and nonstandard widths are also supplied upon request. Yellow Abrasive NosingYellow abrasive nosing is designed for high definition in low light and extra grip. All yellow abrasive nosings are mechanically fastened to grating, so they are easily removable. Our yellow abrasive nosings are usually available with the standard size 70mm X 30mm X 3mm, and nonstandard sizes are also supplied upon request. Perf-O Nonslip Metal Nosings(Handi-Treads Non-Slip Stair Nosings)Perf-O Nonslip Metal Nosings are also known as Handi-Treads Non-Slip Stair Nosings. Handi-Treads Non-Slip Stair Nosings are a permanent solution to slip, trip and fall hazards on both outdoor and indoor stairs. Handi-Treads Non-Slip Stair Nosings feature their raised traction buttons, and these buttons not only provide increased slip resistance, but also are self-cleaning in any weather making them superior to grit tape and girt paint. Our Perf-O Nonslip Metal Nosings or Handi-Treads Non-Slip Stair Nosings are characterized by the following:A. Material: Stainless steel, hot dipped galvanized steel, mild steel, or aluminumB. Dimensions: 900mm long x 70mm wide x 30mm high x 3mm thick Notes: 30mm high is the vertical height of the nose flap or overhang lip that wraps over the leading edge of the stair tread to provide extra traction on the slippery edge.The aforementioned Dimensions can be customized to meet your individual needs. C. Finish: In mill finish, or powder coated finish in black, brown, gray, safety yellow or any other standard RAL colorD. Mountings: Mechanically fastened to grating through the use of mounting bolts, nuts and washersE. Brand: TEC-SIEVEF. Manufacturer: Hebei Tec-Sieve Wire Mesh Products Co., Ltd. 5. All press welded steel bar grating stair treads can be custom fabricated to meet the materials (bearing bars & cross bars) size, the stair treads width & length specifications of your particular job.6. Standard end carrier plates can be custom fabricated to meet special bolt hole size and location requirements.Technical Specifications1. Technical Specifications of Press Welded Carbon Steel Smooth/Serrated Bar Grating Stair TreadsCode No. Bearing Bar SpecificationsCross Bar SpecificationsDepth (mm) Thickness (mm)Pitch (mm)Size (mm)Pitch (mm)TSST-0165520/30/406 X 650/100TSST-0260520/30/406 X 650/100TSST-0355520/30/406 X 650/100TSST-0450520/30/406 X 650/100TSST-0545520/30/406 X 650/100TSST-0645320/30/406 X 650/100TSST-0740520/30/406 X 650/100TSST-0840320/30/406 X 650/100TSST-0935520/30/406 X 650/100TSST-1035320/30/406 X 650/100TSST-1132520/30/406 X 650/100TSST-1232320/30/406 X 650/100TSST-1325520/30/406 X 650/100TSST-1425320/30/406 X 650/100TSST-1520520/30/406 X 650/100TSST-1620320/30/406 X 650/1002. Technical Specifications of Heavy Duty Press Welded Carbon Steel Smooth/Serrated Bar Grating Stair TreadsCode No. Bearing Bar SpecificationsCross Bar SpecificationsDepth (mm) Thickness (mm)Pitch (mm)Size (mm)Pitch (mm)TSHST-011008408 X 850/100TSHST-02908408 X 850/100TSHST-03808408 X 850/100TSHST-04758408 X 850/100TSHST-05756308 X 850/100TSHST-06756408 X 850/100TSHST-07706308 X 850/100TSHST-08706408 X 850/1003. Important Notes about Our Grating Stair Treads(1) Tec-Sieve can manufacture press welded carbon steel plain/serrated bar grating stair treads to any length, however standard lengths are 600mm, 650mm, 750mm, 900mm, 1000mm and 1200mm. Recommended widths of stair treads are 205mm, 245mm, and 285mm, but other widths can be custom fabricated upon request. Our tread length and width tolerance are shown in the sketch below.(2) Our press welded carbon steel plain/serrated bar grating stair tread is manufactured with a defined visible nonslip nosing and two pre-punched and slotted end carrier plates, ready for bolting to stair stringers. In terms of the pre-punched and slotted end carrier plate, Tec-Sieve press welded carbon steel smooth/serrated bar grating stair treads usually need two flat bars measuring 65mm X 5mm used as end carrier plates. As a rule, 1No Φ14mm bolt hole and 1No Φ14 ellipse bolt hole are pre-punched on each of the two end carrier plates. End carrier plates with special dimensional and location requirements can also be custom fabricated in response to our customer's particular job. In terms of the defined visible nonslip nosing, please refer to Product Features. (3) If you want to purchase press welded carbon steel plain/serrated bar grating stair treads, whose technical specifications are not listed in the above two tables, then please feel free to reach out to us, and our technical experts would be happy to help you.Product PicturesFAQStair Treads FAQsQ: Does Tec-Sieve provide custom size stair treads?A: Tec-Sieve manufactures steel bar grating stair treads to the exact size needed. Please phone or email us with your custom sizes and specifications.Q: What is the best way to order steel bar grating stair treads from Tec-Sieve?A: We suggest emailing us to exchange your ideas with one of our sales team members. Tec-Sieve accepts any payment in USD or RMB by wire transfer.Q: What material options does Tec-Sieve offer for steel bar grating stair treads?A: Steel bar grating stair treads are available in mild steel, hot dipped galvanized steel or stainless-steel.Q: Are your steel bar grating stair treads slip resistant?A: Our steel bar grating stair treads are one of our many slip-resistant gratings that we offer. Our serrated steel bar grating stair treads are specifically designed to prevent against slips and falls in areas that are prone to oil, water, or other hazardous elements.Q: How to keep steel bar grating stair treads from rusting?A: Regularly removing debris can help keep steel bar grating stair treads for a longer lifespan. Outdoor steel bar grating stair treads weather over time due to natural elements. A galvanized finish on steel bar grating stair treads typically provides the longest lifespan for outdoor steel bar grating stair treads.Q: How long do steel bar grating stair treads last?A: Steel bar grating stair treads stand the test of time, especially if they are hot dip galvanized. It is not uncommon for a galvanized stair tread to last 20 years, depending on the environment where they are installed.Q: What is the best material for steel bar grating stair treads?A: Tec-Sieve fabricates steel bar grating stair treads in carbon steel, hot dip galvanized steel and stainless steel to suit your specific application.Q: Where can steel bar grating stair treads be used?A: Steel bar grating stair treads can be used virtually anywhere. Indoor/outdoor sporting facilities, waterparks, hotels, resorts, amusement parks, food processing facilities, chemical facilities, water/wastewater treatment facilities, and more.Q: What should I put on steel bar grating stair treads to prevent slipping?A: Tec-Sieve can offer smooth/serrated steel bar grating stair treads with non-slip and highly visible nosings (such as Yellow Abrasive Nosings or Perf-O Nonslip Metal Nosings or Handi-Treads Non-Slip Stair Nosings) that are durable and easy to install.Q: Do you ship?A: Yes! We ship woven wire mesh, welded wire mesh, grassland fence, expanded metal, perforated metal, steel bar grating stair treads and more as per your instruction. Please reach out to us by email for more information.Q: Which steel bar grating stair tread pattern do I need?A: This depends on the intended location and use of the stairs. Larger holes will allow for better drainage whereas smaller ones can help support more weight and meet ADA (The Americans with Disabilities Act) requirements.Q: When should I replace my steel bar grating stair treads?A: Stair treads should be replaced when the customer feels they are no longer safe.Q: What stair tread dimensions do you offer?A: We offer many options for tread widths and lengths. Q: What are the advantages of steel bar grating stair treads?A: Steel bar grating stair treads are ideal for many industrial and commercial applications and can have additional anti-slip properties. In turn, they reduce the number of accidents and increase safety within any given facility.Why Choose UsCompany Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.