IPDB › China Industry › Tools & Hardware › Cable Tools
Copper Wire Online Continuous Annealer1
Cable Tools, Copper Wire DC Annealing Machine Auto, Cable Making Machine
SWAN Wire Engineering
Preview:
Product Description TH4000 Annealing machine Product DescriptionTH4000 annealing machine is based on the principle of contact short circuit annealing.The annealing power source is DC, which is suitable for annealing softening of copper wires.The annealing machine consists of a conductive system, an oxidation protection system, a cooling system, a drying system, and an electrical system.The oxidation protection method adopts steam protection (a steam generator is attached to the device);the cooling and lubrication adopts the dilute concentration drawing fluid circulation. Generally, a pool or an external heat exchanger is required for cooling (the external heat exchanger and cooling tower are provided by the user);the drying system uses compressed air and a mold to dry.The cooling water source and compressed air used are provided by the user. The thyristor of the annealing electrical control part adopts the air cooling method.Detailed PhotosWe adopt DC annealing method. Compared with AC annealing, the cable after annealing has better effect. Because alternating current has periodic fluctuations, cables cannot be completely annealed.Drawing cone with range slip ratio for our machineThe range slip ratio is adopted, and the copper wire will not be fixed to drawing cone with a fixed position during the machine is high-speed operation. Therefore, the service life ofthe drawing cone is increased. The normal service life of our drawing cone is about 12 months. Product ParametersNameParametersAnnealed wire diameter range (mm)1.7-2.76Max Mechanical speed (m/min)600Rated DC annealing current (A)4000Max.DC annealing voltage (V)60Annealing capacity (KVA)260KVASteam generator power (KW)18Amount of steam (kg/h)12Dimensions (mm) LxWxH3350*1600*2640weight (kg)About 2800Compressed air:Working pressure0.6-0.7 MpaFluctuation value+0.02 MpaDew point-25oCFlow200 L/minWater requirements:Working pressure0.2-0.4 MPaTemperature≤25 °CSteam generator water hardnessmax 5 dHAnnealing machine cooling water hardnessmax 12dHPH7~8Flow420 L/minNote: The cooling water must not contain suspended matter, minerals, metal impurities, insoluble and corrosive substancesPower supply:Three-phase voltage~3x380 VAC (±10%)Single-phase vottage~220VAC(±10%)Power frequency50 Hz (±2%)Other DetailsMain component selection: (1)Annealing controller uses annealing specific products: (2)The low-voltage electrical components are made by France, the bearings are made of NIN or NSK in Japan; the oil seals and the readings are made in Taiwan or South Korea; (3)The conductive ring is made of a nickel alloy material; (4)The guide wheel is sprayed with ceramic: (5)The transmission flat belt is made of Swiss brand.Packaging & ShippingCompany Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.