IPDB › China Industry › Manufacturing & Processing Machinery › Stone Processing Machinery
Cht-210 Dual-Station Multi-Line Cutting Machine, Capable of Processing Batches of Ceramic and Glass for Slicing or Cutting Into Blocks1
Stone Processing Machinery, Capable of Processing Batches of Ceramic and Glass for Slicing or Cutting Into Blocks, High-Performance Solution Machine, Semi-Conductor Solution Machine
Yutian Changtong Eiectron Co., Ltd.
Preview:
Product Description Equipment Usage: This model is a 4-rope rotating support frame. The rope length is 210mm. It can process two pieces of materials simultaneously, making it more suitable for slicing or cutting small-batch products. It is used for cutting products ranging from 1mm to 30mm. unitparameterMaximum Worksizemm210*130*140*2topworkcutting thicknessmm1---30running speedm/min0~1000Table lift strokemm220Table cutting feed speedmm/hour0.1~10The amount of wire output from the supply wheelKm30(φ0.2diamond wire)Diamond diametermmφ0.12~φ0.3axleRoller outside diameter*number of axlesmmφ260φ126*3boundary dimensionmm≈1360*1970*1800machine weightKg≈2800power AC380V/50HZ three-phase four-wireTotal machine power ratingKw Equipment Usage: This model is a 4-rotaing rotating support frame. The rotaing length is 210mm. It can process two sheets of materials, making it more suitable for slicing or cutting blocks of small-batch products. It is used for cutting products ranging from 1mm to 30mm.CHTXQ-210 Dual-Station Multi-Line Cutting Machine Features:1. Dual-material plate processing, lower processing cost for small-batch orders2. The overall operation time of the upper and lower rotains plus winding is no more than 15 minutes, and the specification change is convenient3. No need to hire separate operators, multiple-line operators can also be responsible4. The rotains are small, and the costs of slotting and rubber coating are very low5. The floor space is only 1.4*1.9*1.8 meters, and the operation space is sufficient for three internal circular slicing machines6. The manufacturer can provide centralized oil supply and cooling for purchasing more than 2 units.7. The processing cost is low. The main processing costs of multi-line currently are steel wire, labor, and electricity. The steel wire processing cost mainly depends on the processing area. As the processing area decreases, the cost also decreases proportionally. No additional personnel are needed for labor. The electricity cost is currently measured by the magnetic material cutting manufacturer, and for cutting 2mm products, the electricity cost is approximately 5KW/H.8. The lower-mounted worktable. This model is suitable for cutting sample sheets, small-order products, and is flexible and timely.9. When whole-board cutting is needed, use the upper and lower rotains for whole-board cutting.For products with a thickness of 3mm or less, the lower two rotains can be used for winding cutting.10. For products with a thickness of 5mm or less, only the lower two rotains are needed for cutting.For products with 5mm to 30mm, three rotains on the upper and lower sides are used for cutting.For products with a specification of 30mm or above or a very small batch of cutting products, this function does not need to re-open the rotains to achieve the cutting of any size products.Our AdvantagesThe company has been engaged in the cutting, grinding and polishing of quartz crystals for 27 years. It possesses a highly sophisticated processing technology experience and its own R&D design center. It can provide a complete set of cutting processes, technical support and personnel training plans for initial cooperation clients based on the characteristics of the products. It has been professionally developing multi-line cutting machines for 15 years. It provides cost-effective, high-cutting-efficiency and low-single-piece-cutting-cost multi-line cutting equipment for users, and offers overall solutions for multi-line cutting machines.Matching equipment according to customer product requirements (private customization) → Installation and commissioning of multi-line equipment → Personnel operation training, design of cutting processes → After customer satisfaction acceptance, technicians leave the factory → Provide technical video guidanceCHT-210 dual-station multi-line cutting machine training plan. The CHT-210 dual-station multi-line cutting machine is designed to emphasize that personnel who have never operated a line-cutting machine can quickly receive training and immediately start operating the machine. Therefore, all operation buttons, operation handles, and equipment screens are designed and assembled based on the concepts of simplicity, practicality, safety, and reliability.. After the training course contract is signed, the equipment arrives at the factory. On your company's production site, we provide two aspects of training to our customers: 1. Explanation and training on machine operation, fault elimination, daily maintenance and repair. 2. Training and guidance on cutting processes based on the customer's product characteristics.CHT-210 dual-station multi-line cutting machine after-sales service. The machine equipment itself has excellent performance and quality. 365-day dedicated staff are available for consultation. The phone number is 0315-5057575. We promise to provide free technical consultation services and technical guidance on cutting processes to the buyer.. Fast and effective after-sales service. We provide one-year equipment maintenance service. When the machine malfunctions and the buyer cannot resolve it, our after-sales personnel will arrive at your company for service. Common operation faults are explained in the manual.. Lifelong free upgrade of equipment software and hardware upgrades are promised at a discounted price.. The company adheres to the principle of prevention first. For foreign customers and those with locations relatively far from China, while producing the specified products in the contract, we also produce corresponding important accessories. In case the supplied products malfunction, accessories can be sent immediately, saving the response time for after-sales service.Note: In the Chinese market, this type of accessory for diamond multi-line saws, such as the sprocket, is called a roller, and the name may vary.Company ProfileYutian County Changtong Electronics Co., Ltd. was established in 1998. Its headquarters is located in China, in the core of the Bohai Economic Circle - Tangshan, Hebei Province. In 2008, it set up a branch in Yantai. It is a national high-tech enterprise integrating R&D, production, sales and service. After more than 20 years of deep industry exploration, the company has become a leading brand in the field of piezoelectric crystal materials and multi-line cutting technology in China, and its products are exported to international markets such as Indonesia, South Korea and Russia.Core advantagesNational-level technical strength- Has obtained multiple qualifications such as "National High-tech Enterprise", "Hebei Province Technology-based Small and Medium-sized Enterprises", "Hebei Province Specialized and Innovative Small and Medium-sized Enterprises", "Hebei Province Enterprise Technology Center", "Hebei Province Leading Enterprise in Characteristic Industrial Cluster"- Has over 10 invention patents, 30 utility model patents, and 2 software copyrights, continuously promoting industry innovationFull-chain layout- Three core businesses: multi-line cutting equipment, precision mechanical processing, quartz crystal materials (HC-49S/SMD cumulative production and sales of 6 billion pieces)- Independent design capability: Provides one-stop solutions from equipment research and development to cutting process optimizationHigh-end manufacturing capability- Equipped with five-axis machining centers, high-precision horizontal boring machine machining centers, various machining centers, various grinding machines, advanced testing equipment, etc., ensuring product consistency- Collaborative research and development with universities and research institutions: Continuously enhances technical barriersGlobal market recognition- Products cover the whole country and are exported to multiple countries and regions, serving high-growth industries such as electronics, semiconductors, and magnetic materialsTechnical milestonesPatent technology:- "A Knife Holder for Multi-line Cutting Machine and Multi-line Cutting Machine" solves the market application of thick sheet processing in multi-line cutting machines- "A Dual Loading Multi-line Cutting Machine" can process one sheet material to two sheet materials simultaneouslyVisionWith precision cutting technology as the core, promote the global process of China's high-end manufacturing equipment and electronic components, and become an internationally renowned intelligent cutting solution provider >Stable Wire Web Control: Achieve Precision and Reliability with Unmatched EaseUtilizing a cone-positioned structure, our rollers and wire spools deliver unparalleled accuracy and rigidity, effectively minimizing wire web shaking, ensuring smooth, precise operations every time.>Optimized Pulley System: Masterfully Engineered for Unrivaled PerformanceOur expertly crafted 8-pulley system is designed to reduce diamond wire torsion, minimize tension fluctuations, and significantly decrease the wire breakage rate, offering exceptional performance and reliability.>Easy Wire Winding: Efficiency Simplified for Seamless OperationsOur standard universal spool (PV600 reinforced I-wheel) eliminates the need for rewinding, streamlining your operational process and enhancing efficiency effortlessly.>Safety Guarantee: Raising the Bar for Protection StandardsOur main operation door, equipped with an electrical lift and built-in safety devices, ensures secure access, providing an elevated standard of protection at all times.>Wire Break Memory System: Unlock the Power of Innovation with Our Cutting-Edge Solutions for Seamless and Continuous Performance>Easy Operation: Thoughtfully Designed for Unmatched User Convenience and Effortless FunctionalityBoasting open access on three sides, our state-of-the-art cutting room simplifies your workflow, ensuring smooth and hassle-free operation and maintenance while delivering an unparalleled user-friendly experience. (Tangshan Factory Area, Hebei Province, China) (Yantai Factory, Shandong Province, China) Assembly Workshop One (Assembly Workshop Two) (Assembly Workshop No. 3) Large 5-axis machining center (Large horizontal gantry milling machine) (Large five-axis CNC machining center) (Precision cylindrical grinding machine)
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.