IPDB › China Industry › Manufacturing & Processing Machinery › Woodworking Machinery
OSB LSB Oriented Strand Board Production Machine Line1
Woodworking Machinery, Dieffenbacher OSB Equipment, Siempelkamp OSB Machine
Suzhou CMT Engineering Company Limited
Preview:
Product Description 1. Raw materialOSB board is a kind of oriented structural board, which take small dimension wood, thinned wood, wooden core as raw material, be processed into sheets by special equipment (generally 40-100mm long, 5-20mm wide, 0.3-0.7mm thick), after removing oil, drying, sizing, directional paving, hot pressing.Oriented strand board (OSB), also known as flakeboard, is a type of engineered lumber similar to particle board, formed by adding adhesives and then compressing layers of wood strands (flakes) in specific orientations. It was invented in California in 1963. OSB may have a rough and variegated surface with the individual strips of around 2.5 cm × 15 cm (1.0 by 5.9 inches), lying unevenly across each other and comes in a variety of types and thicknesses. OSB is a material with favorable mechanical properties that make it particularly suitable for load-bearing applications in construction. It is now more popular than plywood, commanding 66% of the structural panel market. The most common uses are as sheathing in walls, flooring, and roof decking. For exterior wall applications, panels are available with a radiant-barrier layer pre-laminated to one side; this eases installation and increases energy performance of the building envelope. OSB also sees some use in furniture production. Adjustments to the manufacturing process can impart differences in thickness, panel size, strength, and rigidity. OSB panels have no internal gaps or voids, and are water-resistant, although they do require additional membranes to achieve impermeability to water and are not recommended for exterior use. The finished product has properties similar to plywood, but is uniform and cheaper. When tested to failure, OSB has a greater load-bearing capacity than milled wood panels. It has replaced plywood in many environments, especially the North American structural panel market. Unfortunately, its use as sheathing has contributed to the leaky condo crisis, as it is less able to breathe and release moisture than plywood.OSB board is a kind of oriented structural board, which take small dimension wood, thinned wood, wooden core as raw material, be processed into sheets by special equipment (generally 40-100mm long, 5-20mm wide, 0.3-0.7mm thick), after removing oil, drying, sizing, directional paving, hot pressing.2. LandAnnual output of 120,000-150,000 cubic meter OSB production equipment occupy a land area of about 65000 square meters, including workshop, housing and raw material storage covers, and 8000 square meters production workshop and housing.3. WorkersWorkers: about 20-30days/shift, 3shifts/day, 300days/year......Equipment list (Part) No.NameModelUnitQty.Power(kw)0100 Wood Chips Making Section0101Peeling machine Set1 0102Belt conveyer Set1 0103 Long bench wood planner Set2 0104 Belt conveyer for feeding Set2 0105 First layer chip making machine Set5 0106Belt conveyer for discharging Set2 0107Silo for surface layer Set1 0108Silo for inner layer Set1 4500200 Drying & Screening Section0201Belt conveyer Set2 0202 Dryer Set2 FOR MORE INFORMATION,PLEASE CONTACT WITH US.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.