IPDB › China Industry › Manufacturing & Processing Machinery › Mould
Customized Yg6/Yg8/PDC Tungsten Carbide Peeling Die/Drawing Die1
Mould, Drawing Die, Peeling Die
Guangzhou DT Exp. & Imp. Co., Ltd.
Preview:
Product Description Product DescriptionSkinning die is used to strip the oxidizing layer, stolen goods or other coatings on the surface of copper, aluminum, steel and other materials, also known as peeling die and planing die.It is required that the cutting edge of the mold is sharp, can not break the edge, and can withstand a certain impact. Its working principle is similar to turning.According to different materials, the mold cutting edge Angle and structure are different, the higher the hardness of the material, the smaller the 0 Angle. The height and width of the cutting edge of the mold are required to be consistent during manufacturing. YG6 TUNGSTEN CARBIDE PEELING DIE Grade No.Densityg/cm3T.R.SHPHardnessHRAPerformance & ApplicationYG614.9215090High performance, it is used for cast iron, non-ferrous metal and its alloy and non-metallic materials processing tools, parts, but also can be used for other tools with alloy.------WELCOME TO CUSTOMIZE----- Product ParametersGrade No.Densityg/cm3T.R.SHPHardnessHRAPerformance & ApplicationYG614.9215090High performance, it is used for cast iron, non-ferrous metal and its alloy and non-metallic materials processing tools, parts, but also can be used for other tools with alloy.YG814.7240089.5With higher strength, lower than YG6, suitable for making parts.YG1114.4242088.5Suitable for all kinds of metal and non-metal powder molding and stamping.YG1514250087.5Suitable for drawing steel bar and steel pipe under high compression rate. Top forging, punching and stamping tools that work under high stressesYG2013.5280085.5Suitable for making stamping die. Such as stamping watch parts, musical instrument spring, etc.; Die for punching battery case and tooth paste; Stamping die for small size steel balls, screws, nuts, etc.YG16C13.9275085.5Suitable for general impact resistance forging die.YG18C13.7280084.5Suitable for general impact - resistant forging die, hot heading die and finishing roll.YG20C13.5285083.5Suitable for general damage, impact resistance mold.YG22C13.3290083Suitable for general impact resistant die and nut forming die.YG25C13.1295082.5Suitable for stainless steel screw die, semi - finished roll.Main features1. Peeling die or peeling mold: 6mm-70mm carbide peeling die can be customized with long life, good consistency, high wear resistance and impact resistance. 2. No blasting: The content of 99.95% or more pure raw material tungsten powder as the main raw material, impurity content is very low, no blasting mold. 3. Long service life: The raw material adopts the single-family formula process, adding wear-resistant elements material, the service life of the leather mold is greatly improved. 4. Lower processing cost: The product pass circumference is correct, the overall dimension tolerance is small, and the processing cost is lower. Fast delivery: all kinds of molds complete, rapid production cycle.Hot products Our AdvantagesMaking tungsten steel mold based on your drawing or your finished products' size.Inspecting, packing, uploading and shipping service;Offering all related auxiliary machines, spare parts and consumable tools;Installing and adjusting machines on site and technology training your labors for operation;Trial production on site till everything is going well;On-site technology support if customer needs.24 hours service online before sales and after sales.Company ProfileGuangzhou DT Exp. & Imp. Co. Ltd is established in 2012. We are mainly manufacturing machines for non-ferrous metal production.The main machines are electric melting furnace, holding furnace, continuous casting machine, cutting machine, peeling machine, chamfering machine, drawing machine and, straightening machine. And rolling equipment for steel and brass and copper strip.Also we are supplying Graphite products for non-ferrous continuous casting production line and tungsten steel mold for extrusion and drawing and peeling production line.We have a professional and passionate service team, including research and development department, technology support department and international after sales service department.Our advantages: Qualified Machines; Professional technology, Efficient Service, Worry-free Guarantee.Our Values: Products as the fundamental, Customers as the center, Create a win-win situation.You may like
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.