IPDB › China Industry › Manufacturing & Processing Machinery › Casting & Forging
Industrial Burners, Hot Air Furnace1
Casting Forging, Hot Air Furnace, Igniter, Burner
Jiangsu Shuangda Pump Industry Co., Ltd.
Preview:
Product Description Product type-description:jingjiang Boxin Coman Burner Manufacturing Co., Ltd. is made by Boxin Germany Komen Industrial Combustion Systems Co., Ltd. was established in China in October 2013 The joint venture company. The company is mainly engaged in the production and manufacturing of burners, head office in Germany Boxin Coman Industrial Burner System Co., Ltd. has a history of more than one hundred years History, dedicated to combustion scheme design and burner equipment manufacturing, at high temperatures Has rich experience in the field of application, and its products are widely used in the world It is a leading enterprise in steel, copper, non-ferrous metallurgy and coal chemical industry. Among them, the burner products of the steel industry and coal chemical industry are advanced Technology, reliable quality enjoys a high reputation in China, has won a large number of well-known The trust of enterprises; After the establishment of the Chinese company, relying on Germany's advanced technology, Take advantage of China's manufacturing resources to enhance product competitiveness. Present in country Within the market, Boxin Komen is mainly committed to promoting more in line with the Chinese market Burners in demand for coal chemical and steel manufacturing; Medium coal chemical industry And metallurgical burner products are mainly to provide customers with process burner, coal Hot air generator for powder drying (hot blast stove), starting point burner, middle Interpack heating and baking system, spray gun system, manipulator control device and Heating system, and provide technical solutions and related products and services. Introduction to air self-preheating burner The preheating burner is the core equipment of heat treatment furnace such as roll bottom furnace, heating furnace and continuous annealing furnace Properties determine the heat treatment furnace thermal efficiency, thermal uniformity, energy saving, environmental protection and other key data. Jingjiang Boxin Coman Burner Manufacturing Co., Ltd. has been committed to developing new energy-saving, high-efficiency and other self-preheating types for many years Burner; Through accurate calculation, simulation of hydrodynamic and thermodynamic models, trial production, testing and field inspection, A variety of new self-preheating burners have been developed and a number of patents have been authorized. The air self-preheating burner is mainly divided into three categories First, BYR integrated preheating burner 1) Finned (ceramic) integrated preheating burner 2) Finned and tubular integrated secondary preheating burner Two, BXYR series split preheating burner 1) Split preheating burner for a single preheating gas 2) Double preheating of a variety of preheating gases mouth 3. BXLN series low ammonia burner BIYR integrated preheating burner 1, fin (ceramic) type integrated preheating burner The integrated preheating burner is widely used in various heat treatment furnaces. It has the advantages of compact structure, easy installation, The characteristics of high cost performance, in actual use, the burner flame stability. The picture on the right shows our company's one-piece Preheat the burner, its gas intake with the air Air intakes are made of aluminum alloy, flue gas The base part is made of stainless steel, metal Fins and burner nozzle and other components according to the furnace The temperature is Cr28Ni48W5 and Cr25Ni20 High-temperature heat-resistant alloy manufacturing (heat-resistant steel casting The combustion chamber is made of traditional silicon carbide The material. This type of burner is due to its structural phase For simplicity, high standards of manufacturing materials, with Long service life. 2. Double preheat burner Secondary preheating burner is a new high efficiency preheating burner developed by our company (patented technology), which has high heat transfer efficiency And the overall structure is compact, suitable for a variety of high energy consumption heat treatment furnace. The secondary preheating burner has two heat exchangers, namely fin heat exchange section and tubular combined heat exchange section. 2.1 Feature Description: Secondary preheating burner On the basis of the original integrated metal fin preheating burner, a secondary heat exchanger is added for secondary heat exchange The tube type combined heat exchanger is adopted to greatly increase the heat exchange area and improve the heat exchanger efficiency of preheating burner. The burner has been verified in the customer's normalizing furnace, and the energy-saving effect is very obvious. Compared with the original burner, energy saving rate Up to 15-25%, excellent energy savings. In response to the national call for environmental protection, we optimize the combustion structure of the burner, and the N○X emission of the secondary preheating burner is lower than the original There is a significant decrease in the burner, the actual measurement is less than 120ppm(oxygen content measured by 8%). 2.2 Actual test effect The picture on the left shows the secondary preheating burner installed in Test drawing on radiant tube roller bottom furnace: OK The work reduces the 570oC exhaust temperature of the original burner As low as 360 ° C. After conversion: the original burner is realized Increase the energy saving effect by 10-15%. The consumption parameters of natural gas are: Original natural gas flow 2500Nm3h, Energy saving by 10% can save 250 natural gas Nm'/h; Estimated annual savings of 2.7 million tenders In accordance with the current market price of natural gas Annual savings of about $9 million. two BXYR split preheating burner 1, split preheating burner (single preheating) The split type preheating burner system is a high performance, energy saving combination, using: a newly designed spiral tube heat exchanger + The structure of high-speed secondary air supply burner can form a very good soaking atmosphere in the furnace, which can greatly reduce energy consumption. Reduce flue gas emission temperature and reduce flue gas emission. The key technology of split air preheating burner is: independent spiral tube heat exchanger, high-speed burner nozzle design, two Secondary air supply structure design, burner and heat exchangerThe key technology of split air preheating burner is: independent spiral tube heat exchanger, high-speed burner nozzle design, two Secondary air supply structure design, burner and heat exchanger in the furnace whirlpool design. split Air preheating burner has the following advantages: 1, the use of independent spiral tube Heat exchanger, can obtain very high energy efficiency Rate, can fully recover flue gas waste heat. smoke The utilization rate of gas waste heat is up to 45%. 2. High-speed burner nozzle is used Meter, burner flame rigidity is excellent, long flame Degree stability; 3. The burner uses a secondary air supply knot Structure, high combustion efficiency, best combustion efficiency > 90%; 4, unique burner + heat exchanger Swirl soaking design, maximize the furnace temperature uniformity, furnace temperature uniformity control2, split preheating burner (double preheating) The double preheat burner is an energy-efficient preheat burner designed by Brinkmann for heat treatment furnaces using gas. The double preheating burner can preheat the gas and the combustion air at the same time, and heat the water in the gas through the heat exchanger to 200-400oC, avoid water in liquid form into the burner, which affects the quality of products in the furnace, and can effectively improve the combustion The heat transfer efficiency of the mouth further improves the energy saving rate. The double preheat burner is a customizable product that can be designed according to different furnace types and installation environments Form. Jingjiang Jiafei Trading Co., Ltd.(JiangSu ShuangDa Pump Industry Co., Ltd. )is located in Xinqiao Industrial Park of Jingjiang Economic Development Zone----in the north shore of Jiangyin Yangtze River bridge.Our company is a national hi-tech enterprise,Jiangsu innovative enterprise,Jiangsu " good contract & good faith "enterprise and "AAA" quality credit enterprise.It's an integrated enterprise group which is engaged in pumps,pipes,chemical equipment,heat-resistant and wear-resistant steel castings.Registered capital:68.88 million yuan. Total area:0.23 million square metres .Existing building area:0.13 million square metres. Existing employees:345,including 215 workers above college degree,15 senior engineers and 68 engineers.Leading Products:Pump: chemical process pumps(BB1~BB5,VS1~VS6 series)carry out the latest edition of API610;residual heat removal pump,medium pressure safety injection pump, low pressure safety injection pump .(AP1000/CAP1400/CAP1700/ACPR1000)carry out RCC-M/ASME standard;SDQL forced circulation pump used in salt chemical and environmental protection industries; SDZA gasification key pump used in coal chemical industry;large seawater desalination pump.Pipe:pipes can be fabricated in the shop according to user requirements.We provide nano polyester new material pipe, two component solvent-free epoxy resin pipe,plastic-lined composite steel pipe, tetrafluoroethylene-lined composite steel pipe,glass-lined composite steel pipe.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.