IPDB › China Industry › Manufacturing & Processing Machinery › Metallic Processing Machinery
Anti Finger Print Coating Machine1
Metallic Processing Machinery, Coating Machine, Coating
Wuxi Hengfu Machinery Manufacturing Co., Ltd
Preview:
Product Description Anti-Finger Print Coating Machine Anti Finger Print Coating Machine roller-coats a layer of a Nano Material on the surface of Stainless Steel Sheets, This Nano Material has a metal-Pro property, After being coated and baked, it will stay on the surface permanently (Without being damaged in Bending or Deep Drawing Process) and form a layer of protective film, which will protect the surface from getting affected by Oxide as well as moistures from the air, Which will largely improve the Stainless Quality of the Stainless Steel. With this protective film, the Surface will also be easily cleaned when dirt or finger print gets on, Thus, the name "Anti-Finger Print". Anti-Finger Print Coating Machine is featured by: --- Low Operational Cost --- High Productivity ---Roller Brush Cleaning System & Air Blower Dryer to ensure Better Processing before Coating. --- Special Rubber Roller to ensure the Better& Even Coating on the surface --- Well-Sealed and Heating-Proof Baking Tunnel to ensure the better control Of Temperature inside ---Special Elevation System to ensure the Accuracy of the layer Thickness. --- Imported Scratcher for Better Cleaning of Coating Rollers, this ensures the Better Recycling of Coating Material. --- High-Power and High-Speed Cooling System after Baking to ensure the Better and Faster lamination after Coating. Anti-Finger Print Coating Machine is composed of: Inlet, Intermediate & out Let Roller Table ,Pre- Cleaning Unit , Pre Drying Unit, Coating Machine, Drying Tunnel, Cooling Unit, Laminator Etc.Main Parameters: Work Pieces: Stainless Steel Sheets or Plates of all gradesUseful thickness: 0.5~~3MMUseful Length: 1,000~~6,000MMUseful Width: <=1,219MM, or <=1,550MMTransmitting Speed: 0.5~~2.5M/MinFinishing Result: Anti-Finger Print CoatingType: Sheets to Sheets Non-Standard Machine will be made upon Request. Application: After Anti-Finger Print Process, The Stainless Steel Sheets will have properties as follows, 1): Easy Clean 2): No Color Change after long time installed on the outside 3): When the sheet is Color Coated with PVD, by adding another layer of Anti-Finger Print Coating, the original monotonous color will have a watery Look. 4): More Anti-Scratch: Hardness of Common Stainless Steel sheet is normally 2H~~3H, by adding this layer of Nano Material, hardness can reach 8H or Above, Property of Anti-Scratch can be greatly improved. 5): More Anti-Corrosion: Common Stainless Steel Sheet can stay for 400 Hours In a Salt Spray Test, while Anti-Finger Print Coated Sheet can withstand The test for 600 Hours or longer. 6): PVD Coated Sheet is incompatible with Cement, while after Anti-Finger Print Coated, It could be more "Friendly" with Cement. 7): No Melting While cut by laser 8): Great Adherence---Bending and cutting will still be as easily carried out as Before. Thickness of the Film is usually from 5μm~8μm Because of all the advantages with Anti-Finger Print Coating, It has been widely used in many filed which has a high end requirement for quality.Typical Application of this product is: High-End Elevator, Escalator, Outside Cladding, Home Appliance, and Construction Purpose in Humid Areas Etc.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.