IPDB › China Industry › Manufacturing & Processing Machinery › Plastic Machinery
Pet Bottle Stretch Blowing Molding Machine with Automatic Packing1
Plastic Machinery, Stretch Blowing Molding Machine, Pet Bottle Blowing Machine
Changzhou Changethink Industrial Technology Co., Ltd
Preview:
Product Description Product DescriptionA .LTYM-2500B Stretch Blow Moulding SystemLTYM-2500B stretch Blow Molding Machine (2-cavity,for maximum 2L bottle) (2,2L)ModelParameterQtyUnit price(USD)Total price(USD)LTYM-2500B stretch blowing molding machine2000-2800BPH for 12g 30mm 250ml bottle in stable production;12g 38mm 250ml 30001 set Auxiliary MachinesHP AC high pressure aircompressor2.4/30 1 set HP Air dryer Group3.0/30IncludingThree Air filters,Air dryer and 3.0/30 1m3 air tank31.0/301 set Air Chiller3P 1set Blow Mould2-cavity Aluminum 707530mm2000ml1 set Total Price USD FOB B.Brief IntroductionLTYM-SS series is the most stable two-step fully-automatic pet stretch-blow molding machines(reheat). It has 2 to 8 cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.1).High Automatization2).High Intelligence: The machine can be controlled through touch screen and running status is shown on it.3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.4).High Speed: 3500BPH(4-cavity), 6500-7200BPH(6-cavity)5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.6).Low Cost: Low consumption of electricity, air and water.7).High Transparency: Easy maintenance, absolute safety, visual inspection, low noise.C. Machine FeaturesC.1. Stable performance with advanced PLC.C.2. Conveying preforms automatically with conveyor.C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.C.8. Strong clamping force with high pressure and double crank links to lock the mold.C.9. Two ways of operating: automatic and manual.C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.C.12. Contamination is avoided for the bottle body.C.13. Ideal effect of the chilling with the chilling system.C.14. Easy installation and startingC.15. Low rejection rate: less than 0.2 percent. D.Technical Parameters:ModelUnitLTYM-SS2500LTYM-2500BClamping SystemCavity Quantitycavities22Clamping ForceKG3500045000Mold Strokemm90110Stretching Rod Strokemm300400Stretching Rod Dia.mm1212Bottom Mould Strokemm5050Pitch Distancemm76.2120Preform Holder QuantityPCS6252Container Spec.Max.Container Volumeml6502000Max.Container Heightmm260330Max.Container Diametermm68115Max Preform Heightmm100140Max.Neck Diametermm3838OutputBPH2000-30002800Electrical SystemHeating Oven QuantityZone2*24*4Number of LampPCS2*84*8 Heating PowerKW1520Installed PowerKW3248VoltageVoltageCustomizedCustomizedActual PowerKW25-3030-35Air SystemOperating PressureMpa0.7-0.90.7-0.9Blowing PressureMpa2.5-3.02.5-3.0 High Pressure Air ConsumptionL/min2.4/302.4/30 Chiller SystemTemperature RangeDegree9-139-13PressureMpa0.40.4CapacityHP33MachineMachine DimensionM2.8*1.9*2.23.3*1.8*2.2Machine WeightKG20002500E.Configuration ListNameOriginBrandInductive Sensor JapanOmronMagnetic SensorChinaSegulaProximity SensorChinaSegulaPower SwitchFrance SchneiderBreakerFranceSchneiderIntermediary Relay 24VFranceSchneiderAC Contactor 220V FranceSchneiderSignal AmplificationChinaTouchwinTouchscreen(PLC)ChinaXinJie24V Power Box 24VTaiwanDeltaHeating LampChinaJienengMotor in Preform elevator and unscramble ChinaTailiAdjustable Voltage Module ChinaAoyiTemperature RegulatorChinaYataiThrottling ValveTaiwanAirtacMovement ValveKOREAARKAutomatic typeChinaXinJieStretching Cylinder Main Driving, Bottle ChinaXinJieClamping Cylinder stretching, Mould clamping)ChinaXinJieRailTaiwanPMLCylinder for Pushing Preform JAPANSMCCylinder in robot for evelating preform JAPANSMCCylinder in robot for preform transferJAPANSMCPreform Rotary Cylinder in Robot JAPAN SMCCylinder for Robot ClipTaiwanMindmanSealing CylinderTaiwanLindF.One Year Free Charge Spare Parts ListNoItemQty1Infrared lamp10pcs2Stretch cylinder sealer4pc3HP Air pipe10m4LP Air pipe10m5Sealing cylinder seals4pcs624V magnet valve coil24V2pcs7Robot clip 4 PAIRS8Magnetic switch1pc9Preform holder4SETS10Approximity Sensor1pc11Air Connector20pcs12Instruction1pc13Temperature controller module 1pc14relay 24V 24V1set15Tool box 1set16Inner hexagon spanner(4,6,8,10,12)1set17Solid wrench(8,10,12,13) 1pc for each18Slot type screwdriver(3inch, 4inch) 1pc for each19Phillipe screwdriver(3inch, 4inch) 1pc for eachG.Other Terms and Conditionsi) Delivery: Within 40 days from the date of receipt of 50% downpaymentii) Origin: P.R. China.iii) Payment: 50% by T/T in advance 50% before delivery by T/T.v) Insurance: To be covered by buyer.vi)Validity: 4 weeks from the date of issue of this offer.vii) Packing: Export standard seaworthy Packing.viii) Installation: Our engineer will travel to buyer's country within 10-20 days after receipt of confirmation in the written form from client informing that the goods arrived in site and civil works is ready for installation. The client has to buy round tickets and arrange all local facilities including food, lodging, and transportation during their staying period in buyer's country. The buyer would pay USD 120/day for each engineer during journey.ix) Warranty: One year from the date of Installation or acceptance of the Plant whichever comes first.Note: If the client needs our manufacturer to provide the training program depending on the experience of the local people and the client requirement as the local people has no experience in this kind of plant, the client has to send their people (about 4 technical engineers/workers) to China to receive the training in their factories. The training time will be 20-30 days. The cost in this regard will be discussed later after confirmation of this proposal.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.