IPDB › China Industry › Manufacturing & Processing Machinery › Paper Machinery
YT-Oil Electrical Type Single Facer1
Paper Machinery, Single Facer, Adsorption Single Facer
Cangzhou Yingteng Industry & Trade Co., Ltd.
Preview:
Product Description Structural features:1.Design speed: 80m/min ;Actual production speed: 40m-60m/min2.Effective width: 1400-2000mm3.Adopt hood suction structure, equipped with high pressure and strong fan, suction with noise reduction device. The air source and electrical control are concentrated in the same operating cabinet, which is not less than 1.5 meters away from the main engine, and the operating side is fully closed.4.Wall cast iron structure, wall thickness 130mm. Universal joint drive.5.Corrugated roller material is made of 48CrMo alloy steel, tempered, medium frequency quenching, surface polishing, corrugated main roller diameter 280mm, surface hardness HRC58 degrees or more; Airbag loading. The key parts of the tile roller and pressure roller bearings are made of Wafangdian high temperature resistant bearings.6.Pressure roller ￠284mm, surface grinding processing and chrome plating treatment; Air bag loading, material is medium carbon steel 45, tempering treatment.7.Pneumatic control of glue, glue, glue roller diameter ￠215m. The surface is engraved with pitting pattern after polishing, and the surface of the squeezer is coated with hard chromium after polishing.8.Corrugated roller, pressure roller raw materials provided by Zhongyuan Special Steel, corrugated roller side 0.15mm high, pressure roller side 0.075mm high.9.Diameter of preheating roller is ￠300mm.10.Use four sets of electric heat pipe to heat the thermal oil, heating fast, no need for heating furnace, automatic temperature control and divided into two groups of control.11.Strong closed-loop circulation of thermal oil, low system pressure, no leakage, heat recycling, less heat loss.12.Special structure oil mixing ring is installed in the hot roller, the roller is heated evenly, and the corrugated molding is good.Conventional technical parameters:Working width1400-2000mmDirection of operationLeft or right (depending on customer's facility)Design speed80m/minTemperature range160-220oCAir source0.4-0.9MPaHeating methodOil heat conduction
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.