IPDB › China Industry › Manufacturing & Processing Machinery › Cutting & Fold-bend Machine
Cutting Lead Ingot Machine for Lead Oxide1
Cutting Fold-bend Machine, Battery Machine, Lead Acid Battery Machine
Better Technology Group Limited
Preview:
Product Description Lead ingot cutting machine1. Characteristic of Cold Rolling Lead Balls Cutter1.1 The lead balls made by this lead ingot cold cutting machine is in good shape, close to spherical in shape, suitable for lead oxide mill.1.2 This lead ingot cold cutting machine cuts the lead sheet into lead pellets at one time through a special rolling die. The molding is good and the failure rate is low.1.3 This lead ingot cold cutting machine has good applicability for lead ingot and with low failure rate.1.4 The total installed power of this lead ingot cold cutting machine is about 24 Kw, saving energy and electricity.2. Technical requirements2.1 The equipment is a brand new complete set of equipment, with reasonable structure, stable and durable, safe and reliable, simple operation, convenient maintenance.2.2 The main parts of the equipment are made of high-quality materials, and the mechanical electronics and electrical components selected are well-known brands.2.3 The equipment has well-developed mechanical transmission device, lubrication and filter device and electrical control system.2.4 The design, manufacture and testing of the equipment and instruments shall comply with the ISO standard and the IEC standard. All units of measurement adopt the International System of Units (SI).2.5 The equipment is capable of operating continuously for 24 hours under the rated load and ambient temperature ranging from -10 °C to 50 °C and relative humidity ≤90%, with stable performance.2.6 Corresponding safety protection measures must be taken for the dangerous parts that may cause personal or equipment injury2.7 The metal components of the equipment and instrument are treated with rust removal and paint except for the assembly surface and electroplated surface.3. Main Technical Parameters of The Equipment3.1 Scope of application of the equipment:Scope of application of lead ingot: electrolytic lead, refined lead, lead ingot dimension length≤650mm, width≤125mm, thickness≤90mmLead ingot weight: 40-50kg;3.2 Design and production capacity of the equipmentEquipment capacity: ≥ 2.3T / hour (lead ingot weight will affect the actual situation). Product quality (qualified rate) requirements: lead ball weight 110 ± 10g, accounting for about 90%;3.3 Requirements for the total power, water, electricity and compressed air of the equipment:Power: 3 phase 5 lines AC380V, total installed power is about 24 kW;Compressed air: pressure 0.55-0.65MPa; clean and dry air with flow >110L / min;Cooling water: pure water flow rate >1 L/h4. Main Composition and Performance Requirements of the Equipment4.1 Equipment compositionNO.NAMERemark1Material rack 2hydraulic station 3Lead ingot cold cutter 4Lead ball conveyor 5Electric control cabinet 4.2 Process Flow Description:4.2.1 Material delivery → lead ingot transmission → cut into lead sheet → lead balls rolling cutter → particle delivery;4.2.2 Power: Cut the lead ingot into lead sheet hydraulically; Mechanical rolling is adopted to make the lead sheet into evenly sized lead balls;4.2.3 Control: It adopts Inovance PLC and human machine interface, automatic one-key control, whole-process detection, real-time monitoring;4.2.4 The equipment comes with manual and automatic functions:With interlock protection for Manual and Automatic state (fault automatic shutdown, motor overload protection, transmission blockage automatic shutdown), fault display;4.2.5 Automatic startup process:Choose lead ball silo first --- Start the horizontal conveyor (optional) --- Start the elevator--- Lead balls cutter. The lead strips are cut into sheets of similar thickness parallel to the center line of the ingot, and then uniform lead balls are made.4.2.6 The automatic shutdown process is the opposite of the startup process.4.2.7 The control system adopts Inovance PLC + Inovance human machine interface for centralized control, the operation mode is simple, the main electrical components adopt well-known brands, the pneumatic components adopt JELPC, the motor and the reducer adopt well-known brands in China.4.3 Wearing parts list:No.NameQuantity1upper slitter1pc2lower slitter1pc4.4 Repair kit:No.NameQuantity1Allen wrench1 Set2Allen key 141pc3Allen key 121pc412-inch trapper1pc5Top rod disassembly tool1 Set4.5 Attached accessoriesNo.NameQuantity1Upper slitter1pc2Lower slitter1pc3Ejector pin10pcs4Spring pin10pcs ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Company ProfileBetter Technology Group Limited is a well-known integrated solution provider for global battery manufacturing. The company operates 1 foreign manufacturing plant, 2 domestic manufacturing plants,and offers turnkey solutions for battery production, new energy lithium batteries, and lead-acid batteries. For over a decade, Better Tech Group has deeply served the markets of BRICS countries and countries along the Belt and Road. Currently, its business extends to nearly 120 countries and regions worldwide.The company is committed to its corporate mission: Let Made-in-China beautify the world.Better Technology Group Limited is certified in ISO9001 (Quality Management Scheme) and holds nearly 100 patents, software copyrights, and trademarks. It has been recognized as "National High-tech Enterprise," "Fujian Province Technology Little Giant," "Fujian Province Key Listed Reserve Enterprise," "Xiamen City Key Listed Reserve Enterprise," "Xiamen City New High-Tech Enterprise," and "Xiamen City Outstanding Export Branded Enterprise." The company has established strategic cooperation with several Fortune 500 companies and has achieved in-depth cooperation with well-known Chinese universities in industry-academia-research integration. It has invested significantly in product R&D, technological innovation, and quality control, resulting in consistent annual growth in output value
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.