IPDB › China Industry › Manufacturing & Processing Machinery › Crushing & Culling Machine
Ball Mill Machinery and Mining Press Roller1
Crushing Culling Machine, Roller Crusher, Press Roller
Jiangsu Pengfei Group Co., Ltd.
Preview:
Product Description With the gradual end of the epidemic, the vitality and potential of the world economy have been further demonstrated and released. Jiangsu Pengfei Group has deeply implemented the new development concept, actively integrated into and served the new development pattern, and focused on building a new journey of first-class enterprises. At the beginning of the new year,Jiangsu Pengfei Group quickly switched to the "production mode", and the manufacturing workshop was full of spring. It increased its power to improve its production capacity, went all out to catch up with orders and rush to deliver goods, and put itself into the new journey of the new year with the spirit of "rabbit". The first 180-160mm roller press for New Year's foreign trade export was sent from Shanghai Port to the site of Bangladesh MIR project, which is another important project for Jiangsu Pengfei Group to participate in the construction of "the Belt and Road" and build a new development pattern of "domestic and international double circulation"; After the roller press system is installed and put into operation, the output of grinding platform will be increased from 75 tons to more than 200 tons. The cost reduction and efficiency increase will be achieved through advanced equipment and technology, and the cement enterprises in Bangladesh and other South Asian countries will be assisted to achieve energy saving, carbon reduction and green development. Rolling MachineDescription of Rolling Machine:Our rolling machine is a kind of new-type cement grinding equipment developed on the basis of advanced technology, and its grinding system has integrated the rolling, scattering, separating, drying and powder separating into one body. Besides, when used together with a ball mill, it can be used in various process flows, like pre-grinding, mixing, semi-finished grinding, finished grinding, and more.Due to the change in its grinding principles, this rolling machine and its grinding system have more advantages, like 50-100% lower power consumption, and 100-300% higher productivity.Features of Rolling Machine:1. Heat overlaying weld has been employed to make the maintenance of wear-resisting layer more convenient. Meanwhile, the amount of microcracks is largely reduced, and the service life of roller surfaces is no less than 8000h. It is quite easy to maintain the roller surfaces.2. Aeronautic hydraulic technique is used to make the hydraulic system more reliable and stable.3. With the cooperation of its hydraulic system and automatic control system, it can do the work of load control of main driving motor, deviation control of space between rollers, automatic deviation adjustment, and fault diagnosis.4. Its matched powder separator has scattering, grading and drying capacity, which makes low operation costs and high working efficiency possible.PFG120-45 Rolling MachineParameters of PFG120-45 Rolling Machine:1. Name: PFG120-45 Rolling Machine2. Material name: raw meal of cement, clinker and so on.3. Total moisture content: ≤1-1.5%4. Maximum feeding size: ≤70mm5. Average feeding size: ≤25mm6. Discharge size: more than 25% of processed materials are 0.08mm.7. Productivity: 100-140t/h8. Operation mode: continuous9. Power supply mode: voltage: 380V; motor model: Y355L-810. Layout mode: 2×220KW power for indoor motor11. Roller diameter: 1200mm12. Roller width: 450mm13. Linear velocity: 1.48m/s14. Max. crushing capacity of rollers: 70KN/cmPFG140-80 Rolling Machine:Equipment name PFG 140-80 rolling machine and matched V type powder separator(or scattering machine)Unitset2I. Basic Parameters of Subsets1. Rolling machine SpecificationRoller diametermmΦ1400Roller lengthmm800Passing capacity≥t/h300-350Rotating speed of rotorr/min20.2Linear speed of rollersm/s1.48Working roll gap rangemm25~40Feeding sizemm≤45mm(≥95%)Discharging sizemm≤2mm/0.09mm(65%/20%)Moisture content of material%≤1%2. V type powder separator Model PF3000Air passing volumeM3/h180000~210000Air speed between guiding platesm/s6.8Resistance forcePa1000~1500. Main Components1. Rolling machine 1.1. Main motorSet2Model YRKK560-8PowerkW2×560VoltagekV10Rated rotating speedr/min750Operation frequencyHz Protection level IP44Weightkg55601.2. Main Speed reducerset2Model XG48-36.5Max. transmitting powerkW500Nominal speed ratio 36.5Actual speed ratio Weightkg50002. Matched oil station model XYZ-100GCooling water volumem3/h9PowerkW4Power of electric heaterKW24VoltageV220(380)2.1. Main bearing 4Model Bearing 232/600CAK/W33Weightkg16202.1.1 thermo indicator of bearing 4Model WEPM-201Graduation number PT100Temperature measuring rangeoC0~1002.1.2. Grease centralized lubricating system Pump model ZB2-M16F multipoint lubrication pumpPowerkW0.25VoltageV380Nominal pressureMPa20Amount of lubricating point 142.1.3. Hydraulic system Motor model Y160L-4PowerkW15VoltageV380Diameter of master hydro-cylindermm￠400Amount of master hydro-cylinder 4Normal operation pressureMPa16Max. operation pressureMPa20Oil cylinder strokemm902.1.4. Rollers 2Parent material 35CrMoWeightkg14129Hardfacing layer thickness of rollersmm20Hardfacing layer hardness of roller HRC50Wear-resisting pattern shape of rollers Straight patternsFirst maintenance-free lifespan of rollersh≥80002.1.5. Bearing supports 4Material ZG270-500Weightkg36202.1.6. Rack Material Q235-AWeightkg232182.1.7. Feeding apparatus Model of driving device to adjust valve plate Manual screw adjustmentLining plate material Wear resistantWorking lifespan 3000h2.1.8. Electrical control system 2.2. Weighing bin Volumet Weightkg 2.3. "V" Type Powder Separator 2.4. Cyclone environmental protection equipment PFG150-100 Rolling Machine:Technical Parameters of PFG150-100 Rolling Machine:1. Name: PFG150-100 rolling machine2. Application: clinker crushing3. Amount: 1 set4. Material: clinker5. Total moisture content: ≤1~1.5%6. Max.feeding size: 80mm7. Discharging size: more than 60% of products are less than 2mm.8. Production capacity: 483~543t/h9. Working mode: continuous10. Power supply mode: voltage 6KV11. Layout mode: indoor12. Required power: 2×710 kW13. Diameter of roller: 1500mm14. Width of roller: 1000mm15. Rotating speed of roller: 19.7 r/minPFG160-140 Rolling Machine:Technical Parameters of PFG160-140 Rolling Machine:1. Name: PFG160-140 rolling machine2. Application: clinker crushing3. Amount: 1 set4. Material: clinker5. Total moisture content: ≤1-1.5%6. Max.feeding size: Dmax≤60mm7. Average feeding size: D≤25mm8. Discharging size: 22%~30% is 0.08mm.9. Productivity: 600-720t/h10. Working mode: continuous11. Power supply mode: voltage: 10KV; motor model: YR5603-412. Layout mode: indoor motor power: 2×1120KW13. Diameter of roller: 1600mm14. Width of roller: 1400mm15. Linear velocity: 1.47m/s16. Max. crushing capacity: 70KN/cm217. V type powder separator: V-XY6817Cement Grinding PlantThe cement grinding plant mainly used in crushing and preheating of raw materials, and grinding and packaging of cement. And it is mainly applied to deal with industrial solid wastes like slag, coal ash, coal gangues, and so on. Therefore, it contributes great to the environment protection industry.Our cement grinding plant has the features of simple technological process, easy operation, low investment, electricity saving, environmental friendliness, etc. And various admixtures can also be used in this plant.Here in Jiangsu Pengfei Group Co., Ltd, one-stop service is available, including engineering design, construction, related equipment, assembly and debugging, technical service, and general contracting service. Besides, we have successfully finished many relevant engineering projects, like the construction of cement grinding plant with an annual output of 1-1.2 million tons, the building of cement grinding plant with 0.5-0.6 million tons' annual output, the construction of 0.2-0.3 million tons' annual output cement plant, and the building of plant with 0.1 million tons' annual output.1,000,000Tons/Year Cement Grinding Plant:In this 1,000,000t/y cement grinding plant, clinker and slag are ground separately. PFG120-50 rolling machine and Φ3.2m×13m cement mill are used in clinker ginding. Φ3.2m×13m ginding machine and high-efficiency powder separator are used in slag grinding.This plant features are high quality, high productivity and low consumption.Process Flow Design of 1,000,000Tons/Year Cement Grinding Plant:1. Designing of Clinker Grinding Production LineAfter gypsum, clinker and limestone are measured by the belt weigher, they will be mixed together in accordance with particular proportions, and then sent to the stable weighing warehouse. During this process, magnetic metals are removed by the iron remover from these materials. Then mixed materials will be sent into the rolling machine to be crushed. After crushed, they will be sent to the powder separator, in which coarse powder will be sent back to the griding mill while the fine one will be sent to the elevator for finished products. Finally, they will be sent to finished product storage. Meanwhile, dusty gas from the grinding mill will be purified by the environmental protection equipment before discharged into the atmosphere.2. Design of Slag Grinding Production LineGypsum, dry slag and pulverized coal are measured by the belt weigher before mixed together according to particular proportions. Mixed materials will be sent to the mill for grinding, and during this process, iron remover is employed to remove magnetic metals in these materials. After grinded, fine powder will be sent to high-efficeint powder separator, while coarse powder will be sent back to the grinding mill. Finished cement will be collected by the air tank pulse bag filter, while the fine powder will be sent to the storage for finished products through an elevator. Dusty gases from the mill will be used as the first gas to enter into the powder concentrator, which is followed by fresh air. Finally, dusty gas will be purified by the air tank pulse bag filter before discharged into the atmosphere.3. Design of Mixing Fine Slag and Powder ClinkerBesides the fineness of powder clinker and fine slag in the grinding production line, accurate measuring and even mixing also need to be paid much attention to. That's why we choose to use the screw measurer as the measuring device and the air slide as mixing device as well as conveying deviceDescription of Electrical Control System:Our electrical control systems are in the following:1. XK rotary kiln monitoring system2. Grinding plant monitoring system & micrcomputer control batching system3. Industrial microcomputer control batching system4. ZSF-500A/440 Speed control cabinet for rotary kiln DC motor Environmental Protection EquipmentOur environmental protection equipment is typically designed to separate solid granules from air or liquid in metallurgy industry, electricity field, chemical industry, building material sector, etc.It is mainly comprised of dust hopper, filtration chamber, air cleaning room, holder, lift valve, dust cleaning device.The workflow of this environmental protection equipment is as follows: Dusty gas enters into the dust hopper through the air duct, and then large-particle dust is left at the bottom of the hopper while the small-particle dust is brought by the air flow to the filtration chamber where granules remain on the outside surface of the filtration bags and the purified air enters into the bags. Finally, purified air is discharged by the exhaust outlet via bag mouths and cleaning room. Performance Features of Environmental Protection Equipment:1. High dust collecting efficiency: the dust concentration of purified air is no more than 50mg/Nm3, and its dust collecting efficiency is more than 99.9%.2. High automation degree: automatic microcomputer control technology has been employed for cleaning dust in chambers, automatically unloading and discharging dust.3. Advanced technology: developed on the basis of dust collection technology in America and Germany, our environmental protection equipment is capable of reverse blowing in different chambers and pulse injection blowing. The reverse blowing helps to avoid insufficient kinetic energy, and the pulse injection blowing is able to prevent the filtering and dust cleaning from simultaneously proceeding, as a result of which this machine has high adaptability as well as high dust collecting efficiency.4. High operating efficiency: its maintenance can be made without need to stop the machine, which is quite easy and convenient. If working with the main motor, the environmental protection equipment can have a 100% operating efficiency.5. Long service life: high-quality pulse valve have been applied to ensure its high-efficiency and stable performance. When matched with quality needle felt filter materials, the filter bags can have an average working life of two years.6. Strong applicability: it can be used to deal with dusty air with an inlet concentration as high as 1300mg/Nm3. Besides used individually as dust collecting device for air purification, it is also can work together with high-efficient powder classifier and vertical grinder. When fitted with needle felt or other special filter materials, this environmental protection equipment can be used to handle a wide range of dusts. When designed with antistatic filter materials, it is capable of high-concentration coal dust.7. It is capable of handling large air volume, and has the advantages of good dust removing capacity, high dust collecting efficiency, reliable operation, easy and convenient maintenance, small size, and so on. The general introduction of the technology used in the slag powder/steel slag powder production line with annual capacitThe storage and transport of the wet slag/steel slag: the wet slag/steel slag is transported to factory by truck and storage hall through discharge hopper and belt conveyor. Re-taken away by the forklift, the material is conveyed to slag/steel slag vertical mill directly via belt conveyor after weighed by constant feeder. To remove iron, an electric magnetic iron remover device is installed on belt conveyor.The grinding and storage of the slag/steel slag: the wet slag/steel slag is transported to the inlet of vertical roller mill by belt conveyor after measured the weight by constant feeder. After dried and ground, the slag powder/steel slag power/steel slag power is conveyed to silos by aerated conveying though and elevator after collected by pulse-jet bag dust collector. The discharged waste slag will be re-fed to the vertical roller mill again via belt conveyor and bucket elevator. An electric magnetic iron remover is installed on waste slag belt conveyor for iron removal. The emission concentration of the air box pulse bag type dust collector is less than 20mg/Nm3. The heat source, used for grinding and drying, is provided by the coal fired hot air furnace that set in front of the vertical roller mill.Jiangsu Pengfei Group is equipped with advanced technology and can meet the requirements of 1 million tons mineral powder production line.We can also provide sets of equipment and technical service. The system electric consumption is no more than 40Kwh/t and it meets the environmental emission standards.The advantages of slag power/steel slag power production linesConsiderable investment returns, 1-2years payback periodThe widespread use of slag power brings in its wake an increasing market demand for slag powder production equipment. Investing in this business can get you rewarded with considerable profits on an annual basis. Generally speaking, it would take 1 to 2 years to recoup money on the project.High productivity and energy efficiencyGRMS series vertical roller mill is thought of as the heart of a complete slag powder production line. Comparing with traditional ball mill, it helps reduce power consumption by 20%-50%. Slag power produced by our line generally by our line generally has a specific surface area of 4200-4500cm2/g, which meets the particle fineness and size distribution requirements. They are ideal admixtures for a variety of Portland cements.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.