IPDB › China Industry › Manufacturing & Processing Machinery › Customized Service for Machinery
Feed Extruder, Fish Feed Extruder, Dog Feed Extruder, Cat Feed Extruder, Animal Feed Extruder1
Customized Service for Machinery, Fish Feed Extruder, Dog Feed Extruder, Cat Feed Extruder, Animal Feed Extruder, Feed Extruder, Hot Sale Feed Extruder
ZHENGZHOU YUSHOU HEAVY INDUSTRY CO., LTD.
Preview:
Product Description Feed extruder Multi-purpose pet, fish, shrimp puffing feed machine, pet food puffing machine, this equipment takes corn, soybean (bean cake) animal waste as raw materials, directly into the machine can be puffed to produce different particles of novel shape, unique taste, rich nutrition, delicate organization, suitable for dogs, cats, fish, birds, rabbits, shrimp, dogs, cats, minks, foxes and other pet flavors of feed. .Wet extruder: raw materials need to be conditioned by water and steam before and during extrusion. After extrusion, they need to be dried and cooled to become finished products, which is characterized by large processing capacity and good product quality.Dry extruder: It adopts screw and material moving friction self-heating mode, without adding water and steam system.Dual-use of dry and wet: The expander produced by our company can add or remove the conditioner, which has the function of both dry and wet.Product Parameters TypeCapacity (t/h)Main power(kw)Feeder power(kw)screw size (mm)Cut power(kw)DGP600.12-0.15150.4φ600.4DGP700.18-0.2518.50.4φ700.4DGP800.3-0.3522/270.4φ801.1DGP1000.4-0.4530/371.1φ901.5DGP1200.5-0.7551.1φ1202.2DGP1350.8-1.0751.1φ1352.2DGP1601.2-1.5901.5φ1552.2DGP2001.8-2.01321.5φ1953.0 Attachment: Pet Feed Extruder Instructions1. the extruder is suitable for fish culture, shrimp, frog, pig, duck, etc. The extruded feed produced by the extruder has the soft ripening, high protein, complete nutrient composition, long time floating on the water surface, and no waste of feed. Add trace elements, and promote rapid growth of fish. 2. Put wheat husk, corn flour, bean cypress, fish meal, etc. together with compound premix, add 10-17 kilograms of water per 100 kilograms according to the formula, mix evenly in the mixer, stir the mixer for about 3-5 minutes, open the mixer and stir the dragon, drain the material into the savings barrel, and stir the dragon from the savings barrel into the outlet of Penghua machine. Attention should be paid to controlling the closing of the storage barrel. From small to large. 3. The size of granulation is determined by the size of the granulation holes. If Penghua wants to be 4.5 cm in general and Confucius opens 4 to 5 holes, if it wants to have high output, it can open 10 to 15 holes without Penghua. Small motors can be adjusted from front to back. The knife can be adjusted in the forward direction. When cutting, the first step is to use 3 to 5 kilograms of feed plus more water. 4. After finishing each time, the cutting part of the front section is dismantled, the nut on the expander head is dismantled immediately with the tool hook, and the surplus feed in the machine is cleaned out by the starter motor, and the nut orifice plate is cleaned up. Troubleshooting methods1. There are strange noises in the body, rotten bearings, wear and tear, and lack of oil. Jpg method: take apart the big belt pulley, the front discharging part, and hammer out the spindle back. According to the original first into the bearing, fixed the back cover screw, then into the front bearing, to replace the oil seal, add lubricant, do not add oil. 2. The screw (propeller) can produce about 100,000 kg and will wear out.The output decreases and does not swell. Solution: Replacement of new screw (propeller)The sleeve is more durable than the propeller. Generally speaking, new propellers are equipped with old sets and new sets.Old Shaft (Propeller) 3. When the discharge hole is too large, the other hole should be replaced. 4. For other reasons, the discharging nut can not be disassembled. The sleeve can be disassembled with a tool hook, clamped with a vise, and disassembled with oxygen heating. Packaging & Shipping
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.