IPDB › China Industry › Manufacturing & Processing Machinery › Hydraulic Press
Hot Isostatic Press Machine, Hydraulic Press, CIP Machinery Equipment1
Hydraulic Press, Hydraulic Press, CIP Machinery Equipment, Hot Isostatic Press, Isostatic Press Machine
Chinasun International Industry Co., Ltd.
Preview:
Product Description RDJ500/1500-200.2000 Type Hot Isostatic Press Main Technical parametersMaximum working pressure: 200MPa;Maximum working temperature: 2000oC,Common operating temperature:1850oC;The effective diameter of heat zone:Φ500mm;The effective height of heat zone:1500mm;Heating material:C/C;Temperature thermocouple:WRe3/25(JB/T9497-2002),when working temperature is not less than1700oC,the Thermocouple service life is 1 furnace time;Working medium:high purity nitrogen or argon(99.99%);Vacuum degree(room temperature,no working parts):≤500Pa; Vacuum time(room temperature,no working parts):t≤30min;Maximum temperature deviation of effective hot zone from 800oC to 1850oC(no working parts,Heat preservation stage,pressure 50MPa~150MPa,Refer to GB/T9452-2012 and adopt the WRE3/25 workpiece thermocouple for 9 point temperature measurement):≤±10oC;Heating up time(no working parts):room temperature~1850oC≤4h;0~60MPa Prepressurized time(no working part):≤4h;Maximum weight capacity of working table:600kg;Gas recovery rate:≥80%; Pressure measurement accuracy:≤0.5%F.S.;Loading mode: upper loading;Install way: Pit installation, ground operation Operating conditions Altitude:≤2000m;Temperature:+5oC~+40oC;Relative humidity of air is not more than 90%(20oC);Power supply requirement:Installation power is about 1200kW(AC380V±10%,50Hz±1%,TN-S income wire system);Water supply requirement:Pressure0.3~0.5MPa, Flow≥50m3/h,Water inlet temperature ≤30oC,Water outlet temperature≤45oC;The working limit height of the crane hook in the workshop of the hot isostatic press is from the ground≥5.5m,hoisting weight≥6t;A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources.Our main type of press is as follows:1. Cold Isostatic Press:S.NO.TypeDiameter of Pressure VesselDepth of Pressure VesselMaximum Isostatic Pressure1CIP 200/300-300200mm300mm300Mpa2CIP 200/1000-300200 mm1000mm 300Mpa 3CIP 420/4000-320420mm4000mm320Mpa 4CIP 500/1200-400500mm1200mm400Mpa5CIP 500/1500-300500mm1500mm300Mpa6CIP 710/2000-250710mm2000mm250Mpa7CIP 1000/3500-2001000mm3500mm200Mpaa. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running2. Hot Isostatic Press:S.NO.TypeDiameter ofPressure VesselHeight of Pressure VesselPressureTemperature1HIP 800/1200-150/1000800mm1200mm150Mpa1000degrees2HIP 1250/2000-200/14001250mm2000mm200Mpa1400degrees3. Warm Isostatic Press:S.NO.TypeDiameter ofVesselLength of VesselPressureTemperature1WIP D500-L2000/P200mpa-T300500mm2000mm200Mpa300degrees2WIP D300-L1500/P250mpa-T200300mm1500mm250Mpa200degrees3WIP D630-L2000/P250mpa-T300630 mm2000mm 250Mpa 300degreesa.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running. Company Profile Sichuan Sohaipu Isostatic Press Technology Equipment Co., Ltd. was founded in 2005. It is a leading manufacturer dedicated to research, development and manufacture of cold isostatic presses. We are famous for its efficient R&D and technological breakthroughs.Our company has large-scale mechanical production capacity, with 5-meter vertical lathe, 2*10-meter horizontal lathe, 2.5x6.5 CNC gantry milling machine and other large-scale mechanical equipment, using advanced strand technology, cold stability, long life. Guarantee isostatic pressure. Our Customer CertificationsSichuan Suohaipu Isostatic Pressing Technology and Equipment Co., Ltd. is a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP). Up to now, we have supplied more than 500 sets of the presses to the market.We sincerely hope to establish long terms business relations with customers worldwide in the line. Warmly welcome your inquiries, any ideas or suggestions, please feel free to contact us. Your attention and interests to our products would be fully appreciated.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.