IPDB › China Industry › Manufacturing & Processing Machinery › Mining Machinery
Rock Splitter Mounted on Specialized Carrier: for Horizontal Tunneling Hydraulic Rock Splitting Machine1
Mining Machinery, Rock Splitter, Hydraulic Rock Splitter
Shaanxi Zhongtuo Mine Equipment Co., Ltd.
Preview:
Product Description Product Description Introducing the Rock Splitter Mounted with Excavator, a cutting-edge solution for all your rock splitting needs. Designed with top-of-the-line features, this huge rock splitter can be easily mounted from a crane or a normal excavator for open pits or shafts. It can also be mounted on a specialized carrier for horizontal tunneling.With its innovative design, this rock splitter generates driving force by increasing the output pressure of the excavator through the supercharger. The driving oil cylinder then generates the necessary force, and the hydraulic oil is transported to the oil cylinder pipe in the airborne splitting machine through the excavator. The ultra-huge rock splitter of the splitting machine is then controlled to push and expand, generating the necessary splitting force on the object.To ensure optimal performance and avoid undue failure of the hydraulic splitting machine, please observe the following guidelines strictly when using the splitting machine:1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division. The hole depth requirement is splitter front end of the block length plus 900mm or more. For example, if the split block length is 600mm, then you must drill more.Invest in the Rock Splitter Mounted with Excavator today and take your rock splitting game to the next level.The huge rock splitter can be mounted from a crane or a normal excavator for open pits or shafts or mounted on a specialized carrier for horizontal tunneling.After the output pressure of the excavator is increased by the supercharger, the driving oil cylinder generates driving force, and the hydraulic oil is transported to the oil cylinder pipe in the airborne splitting machine through the excavator, and the ultra-huge rock splitter of the splitting machine controlled to push and expand, generate the splitting force on the object. Product Parameters ModelSplit Block Length mmDrilling Depth mmPressure MPaDisruptive Force TCrack width Weight kgZT220-P90800-9001300mm24-253300-360025-30600ZT260-P100950-10001700mm24-254400-520030-25650ZTN50-P1001000-12002100mm24-25600030-25730Precaution of operating ultra-large rock splitter For your better use of our ultra-large rock splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division;(Hole depth requirements: splitter front end of the block length + 900mm or more, for example, split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter;3. Do not use the splitter gun as a crowbar to use. Company Profile RFQ Q1: Whether the rig is used for rock holes or soil holes?A1: Equipped with different drill bits according to the application object. Rock drilling rigs are equipped with round steel drill impact hammers and rock drill bits. The soil drilling rigs require a twist drill pipe and a three-blade drill bit. Q2: How much tonnage can a bridge jack lift??A2: The range is from 50 to 1000 tons, depending on the application needs we have the right choice for you. Q3: How many meters is the connection between the jack and the oil pump?A3: The factory standard is two meters. If you need longer, we will make it for you. Q4: What is the difference between the hydraulic oil pump?A4: For the tension jack, it is 50 MPa 3 kW oil pump and 60 MPa 4 kW oil pump.Q5: What kind of packages does a set of anchors have?A5: Anchor ring, clip, anchor pad, spiral rib. Q6: Which payment term can you accept?A6: 100% T/T( Decide according to actual situation)Q7: How long is the machine warranty?A7: One year for the machine and provide technical support according to your needs.Q8: How long will it take to arrange production?A8: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days. Q9: Which trade term can you accept?A9: Available trade terms: FOB, CIF, CFR, EXW, etc.Q10: Do you provide samples? Is it free or extra?A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.Q11: What are your terms of payment?A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.Why you choose us:1. We are a real factory offering products and providing free technical advice.2. Company in business for many years and served Over 50 countries' customers.3. All machines with CE, ISO, and SGS certificates. Machine and spindle warranty 1 year. 4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.5. Fast delivery, save your time.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.