IPDB › China Industry › Manufacturing & Processing Machinery › Mining Machinery
Alluvial Gold Mining Knelson Gravity Centrifugal Concentrator Jig Spiral Supplier Price for Mineral Diamond Tin Coltan Chromite Zircon Sand Magnetic Iron Ore1
Mining Machinery, Gold Concentrator, Centrifugal Concentrator
Ganzhou Gelin Mining Machinery Co., Ltd.
Preview:
Product Description Product Description99% Recovery Alluvial Gold Mining Knelson Gravity Centrifugal Concentrator Jig Spiral Supplier Price for Mineral Diamond Tin Coltan Chromite Zircon Sand Magnetic Iron Ore Our factory produce Spiral chute / Spiral concentrator, Jig concentrator machine, centrifugal concentrator, shaking table, trommel, magnetic separator, high tension electrostatic separator and so on.1).Gravity centrifugal concentrator1. Descriptions:The Gold Concentration Separator is a new type of gravity concentration equipment for concentrating gold and other high density minerals. The centrifugal concentrator gets many competitive advantages compared with other concentration machines which create high returns for the investors.The Gold Concentration Separator, which is also called centrifugal concentrator is usually used for roughing separation during the gold separation flowchart to recover most of the useful minerals and get rid of most of the barren rocks. 2.StructureThe following drawing shows the structure of the Gold Concentration Separator:3. Application:STLB Gold Concentration Separator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Since 1985, three models of Gold Concentration Separator have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of-0.074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times.4. Features: 1) High recovery rate: Through our test, the recovery rate for placer gold can be 98% or more, for rock gold, the recovery rate could reach 97% when the feeding size is below 0.04mm.2) High efficiency: STLB60 Gold Concentration Separator has a capacity of 15-30TPH, and STLB100 Gold Concentration Separator has a capacity of 60-100TPH. Only one machine could give you such a high capacity and high recovery rate. It's the most efficient concentration equipment in our factory.3) Easy to install: only a small leveled place required. It's a complete machine, before starting it, only need to connect the fluidization water and power.4) Easy to adjust: there are only 2 factors that will affect the recovery result, they are water pressure and feeding size. By giving proper water pressure and feeding size, you could get the best recovery effect.Easy to operate: after finishing the water pressure and feeding size adjust, what U have to do is to fetch the concentrates every 2-4 hours. (Depending on the grade of the mine)5) No pollution: this machine only consumes water and electric power, and exhaust tailings and water. Low noise, no chemical agent involved.6) Reliable: this Gold Concentration Separator gets a simple & tough structure, the main body is made by strong steel, and the concentrate cone is made by stainless steel. And the bearing is greased to keep it running well. 5. Working Principle:The materials are uniformly fed to the belt. When materials go through the permanent magnetic drum, the non-magnetic and low-magnetic particles will leave the belt surface because of the centrifugal force and gravitation. Meanwhile, strong-magnetic particles are absorbed to the belt by magnetic force and then fall into the magnetic trough when the belt leaving the magnetic pulley.6.Technical Data ModelSTLB20STLB30STLB60STLB80STLB100STLB120Feeding Capacity(t/h)0-0.62-38-1235-45(solids)50-8070-100Fluidization water Required(m 3 /h)2-33-57-1030-36 55-8070-100Slurry Water Required(m 3 /h)1.5-45-78-12 35-50 70-10080-120Feeding Density(%)0-500-500-500-500-500-50Feeding size(mm)0-30-30-50-5 0-50-6Concentration Cleaning Up CycleVein gold 1-3 Hours Placer gold " 2-6 Hours Concentrate weight(kg)210-2030-4060-7080-90 100-150Power Requirements(Kw)0.751.541122 30Approximate shipping weight(Kg)2004601400200025003500Approximate created shipping Dimensions (mm)790*785*7901180*1140*12501970*1670*17502300*1800*22002300*2000*20002400*2300*22002). Spiral Separator (Spiral Chute)Usage:1. Rutile, ilmenite and zircon concentration2. Iron ore, chromite and manganese beneficiation3. Tin, tantalum and ore concentration4. Gold, native copper and base metal recovery5. Silica sands processing6. Titano-magnetite concentrationFeature & Benefits:Reasonable structure and small occupation areaHigh recovery, high efficiency, and precise separation,Light in weight, rust and corrosion resistant;Simple installation and Minimal maintenance requirementsLow operating cost and long operating lifeReliable running with minimal operator attentionStrong adaptability to fluctuation of feeding amount, density, size and grade;Specification of Spiral SeparatorModel5LL-15005LL-12005LL-9005LL-6005LL-400Outside dia(mm)15001200900600400pitch(mm)540,720900,720,540675,540,405450,360,270240,180Pitch Dia Ratio0.75,0.6,0.450.75,0.6,0.450.75,0.6,0.450.75,0.6,0.450.6,0.45Lateral slope9°9°9°9°9°Maximum starts per column4-24-24-23-22-1Max Feeding Size(mm)33333Feeding Density(%)25-5525-5525-5525-5525-55Capacity(T/H)8-64-62-30.8-1.20.15-0.2ExternalSizeLength(mm)156013601060700460 Width(mm)156013601060700460 Height(mm)52305230400026001500Weight (Kg)800600400150503). Jig machine / JiggerOur factory produce both sawtooth way jig and hydraulic radial jig, we produce different size jigs for different process capacity from 1 ton per hour to 300 tons per hour per set.Our jig machine is widely used for concentrating / separating heavy mineals sand, gold and diamond mining, tin (cassiterite), ilmenite, hematite, iron ore, zircon and rutile sand, barite, manganese, tungsten, chromite etc...Large process capacity CNC Jig.Feeding size: can handle any -30mm materials(<30mm).Process capacity:30 tons per hour per set.CNC adjust stroke and frequency, it is easy to handle the process speed and capacity.Three chambers per set with only one piece 7.5kw electric motor, less electric consumption! Traditional Sawtooth Wave JigJig separator belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig is mainly consist of three parts: Main frame, driving set and jigging chamber.The device is suitable for sorting ferrous and nonferrous metals, chemicals, construction and metallurgical aspects of experimental research.Working Principle Of Jig MachineJigs a kind of energy saving gravity equipment development and improved on the basis of traditional jigs according to the the oretic layering law of jig beds. Their jigging pulsation curves take the shape of sawtooth waveform which gets the ascending water to travel more rapidly than the descending water. The ascending time is short while the descending time is long. The problem that the ascending descending water flow and action time produced by sine wave and pulsation wave are the same is solved. The looseness of bed is strengthened and suction function is alleviated so that the heavy ore grains in the minerals are able to precipitate fully and the sorting ratio ability and recovery rate of equipment are largely improved.Specification of traditional sawtooth wave jigModelChamberMaximumFeedingsize(mm)Wateraddedm3/tPressureof waterMpaCapacityt/hMotorpowerkwDimensionmmWeightkgshapearea(m2)JT0.57-1Ladder0.5761-3>=0.51-2.51.51550x780x1530610JT1-1Ladder1.04101-32-42.22270x1110x1890900JT1.5-2Rect1.53101-23-833200x1550x20501520JT2-2Rect2.28101-34-833225x1550x20501640JT3-1Ladder3.3101-36-105.53180x2000x26003260JT4-2Rect4.33301-310-157.53600x1850x26004600JT5-2Ladder4.86101-310-157.53600x2000x26004500JT1.5-2SRect1.53301-33-81.5x23200x1550x20501590JT2-2SRect2.28301-34-83x23225x1550x20501700JT3-2SRect3301-36-155.5x23560x2030x26003260JT4-2SRect4.33301-310-204x23600x1850x26004660JT5-2SLadder4.86301-310-205.5x23600x2000x26004700JT6-3SRect6301-315-307.5x24600x2000x260059006). Hydraulic Radial JigDescriptions Hydraulic radial jig has been widely used as roughing separation equipment to select ore such as alluvial gold, tin, diamond, tungsten, manganese and hematite. Hydraulic radial jig is developed from circular jig. It's composed of two parts: drive and tank. The drive is mechanical hydraulic type, the power is provided by motor through the transmission mechanism let the output shaft of the gear reducer drives the cam rotation, the cam pushes the piston of each master cylinder make periodic reciprocating motion, which converts electrical energy into mechanical energy and then into hydraulic energy. Through hydraulic pipes and all kinds of valves let the moving cylinder drives the cone of jig up and down fluctuation. Hydraulic radial jig adopts electromagnetic speed regulating asynchronous motor to realize the frequency adjustment, it's a step-less adjustment and the adjustable range of jig frequency is 0-90 times per minute. Hydraulic radial jig has many advantages compared with the various jig machines: Big jigging area, big capacity; because the jig tank is fan-shaped, it is advantageous to recover fine particle materials; Compact structure, central feeding and small distribution space, suitable for use on dredger; Because of the hydraulic drive, the transmission mechanism is simplified and saving power. The total power of the same process capacity is only 11.6 Kw, saving about 55% power than the conventional jig machine in the same concentration area. The pulsation curve is approximation saw-tooth curve, not only conducive to recover fine heavy minerals, also saving a large number of make-up water, the make-up water is about a quarter of the ordinary jig.Advantages and CharacteristicsBig capacity, less land occupation, wide recover range on sizeHigh concentrating ratio and high recoveryEasy to install, operate and maintainThe pulsation curve is saw-tooth wave shape facilitate heavy mineral to settlingSaving water 60-70% and saving power 55% than the ordinary jigThe pulsation speed very easily adjusted by the regulatorCan achieve a good result in processing such as placer gold, tungsten, tin, hematite, manganese, barite, and gemstone etc.Chamber3456789101112Jigging area(m3)9.913.216.519.823.126.429.73.336.339.6Stroke(mm)20. 25. 30Frequency of stroke(r/min)50-85Feeding size(mm)<25Make-up water(m3/t)1-3m3/ton of oreMake-up water pressure(MPa)≥0.10Capacity(t/h)50-7566-10078-125100-150116-175132-197150-200166-245182-270200-300Driving motor(Kw)5.57.57.57.5111111151522hydraulic power unit(Kw)0.55Weight(kg)600080001000012500142001580017500180001920021000Company Profile Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.---Experienced Mining Machinery Manufacturer---Our distinctive prodcts include shaking table, Jig, Spriral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, feeder, classifier, ore washing machine and lab equipment ect. Our machines are popular in separating GOLD, copper, manganes, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite,ect. GELIN Services--- PRE-SALE SERVICE ---1) Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;2) Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;3) Design and provide the complete processing flowchart;4) Design & manufacturer products according to clients' demands.--- AFTER-SALE SERVICE ---1). Pre-check and test the products before delivery;2). Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;3). Trace the status of the shipping until the products received;4). Prepare required documents to let clients pass custom clearance;5). Dispatch experts to carry out below service on site: A) Installation & debug of the machinery B) Train the first-line operators & technical personnel C) Carry out any other service clients may need6). Provide technical exchanging & spare parts for life-long term--- ONE STOP SOLUTION ---1) Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;2) Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;3) After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demandsFAQ Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance. A:1). What type is the mining? Is it rock stone? or it is sand? 2). If rock stone,What is the general particle size(mm) of the raw ore? 3). What is the handling capacity(tons per hour) you plan to work with? 4).What is the elements of the raw ore? How much percent % of each minerals?Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.Q: How long is the warrenty of your equipments? Does your company supply the spare parts?A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.Q: If i need the complete mineral processing line. is Gelin able to help us build it?A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. Related ProductsWash and screen equipmentCrusherGrinding machineCentrifugal concentratorJig machineShaking tableSpiral chuteMagnetic separatorElectrostatic separatotrElectromagnetic separatorSluice boxDewatering screenVibrating screenHydrocycloneFlotationFeederScrubberSand washer machinePumpDryerBelt conveyorLab mining equipment Warmly welcome Till now, our machines are exported to over 60 countries, such as United States, Canada, Peru, Brazil, Russia, England, Spain, Sudan, Morocco, Cote d'lvorie, Ghana, Congo, Mali, Zimbabwe, South Africa, Mozambique, Cameroon, Tanzania, Kenya, Angolia, India, Malaysia, Philippines, Indonesia, Australia, New Zealand, Mongolia, Myanmar etc... Looking Forward To Your Joinning!!!
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.