IPDB › China Industry › Manufacturing & Processing Machinery › Mining Machinery
Four-Wheel Drive Underground Scissor Lift Truck with Hydraulic Mechanical Transmission1
Mining Machinery, Underground Scissor Lift Truck, Four-Wheel Drive Truck
QINGDAO ZONGDA MACHINERY CO., LTD
Preview:
Product DescriptionProduct DescriptionThe ZUSL-3X lifting platform truck :Trackless lifting platform equipment The ZUSL-3X lifting platform truck is powered by a diesel engine, with hydraulic mechanical transmission, four-wheel drive, forward driving, fully hydraulic articulated steering, large steering angle, flexible turning, and small turning radius. It is suitable for medium cross-section tunnel operations 1. Technical Characteristics: Power System: The power system adopts Deutz water-cooled low pollution engine; Transmission: The power transmission system adopts DANA power shift transmission, DANA drive axle, and mining pattern cutting resistant tires;Braking System: The service braking adopts wet multi disc hydraulic brakes; MICO filling valve and brake valve; The parking brake adopts a manual directional valve to control the axle spring brake, ensuring safety and reliability; Frame: The frame is an articulated structure with reliable performance; Adopting a closed cab is safer and more comfortable.2. Safety Measures: Safety Gear: Operators must wear safety helmets, carry self-rescue devices, and use mining lamps when entering the well. Regular Maintenance: Regular inspections and prompt addressing of hidden dangers. No Maintenance During Operation: Strictly prohibited to conduct maintenance while the machine is running. Safety During Welding/Cutting: Confirm absence of flammable or explosive materials before maintenance. Exhaust Pipe Precautions: Avoid physical contact with the hot exhaust pipe. Hydraulic System Maintenance: Pressure must be relieved before starting any repairs.Usage Conditions for the ZDL203S Underground Loader 1. Tunnel Specifications: Suitable for tunnels with a cross-sectional size of 3 meters (height) × 3meters (width) and above. Requires a firm top plate. Minimum turning radius of ≥6.25 meters on the outside. Road slope should be ≤ 14°. Adequate ventilation and drainage in the workplace. 2. Environmental Factors: Ambient temperature within the tunnel: -5°C to 40°C. Maximum relative humidity (at 25°C): Not more than 85%. 3. Fuel Requirements: The sulfur content of the fuel used in this machine must not exceed 0.2%. 4. Safety Precautions: Strictly prohibited in places with flammable and explosive gases (such as gas and coal dust).Technical parametersRated load of the platform: 3000kg Maximum platform height: 5000mm Maximum driving speed in gear I: 5 km/h Second gear: 11 km/h Third gear: 26 km/h Reverse gear I: 5 km/h Reverse gear II: 11 km/h Reverse third gear: 26 km/hMaximum climbing capacity (heavy load): 14 ° Maximum traction force: 80 kN Turning radius: 6610 mm Maximum height of the entire machine: 2210 mm Steering angle: ± 40 ° Minimum ground clearance: 295 mm Overall dimensions (length × wide × Height: 7850 mmx1800 mmx2210 mm Operating weight of the entire machine: 9500KgEngineEngine: German Deutz TCD 2013 L04, water-cooled low pollution engine/ USA Cummins QSB4.5-C130-30 Rated power/rated speed: 120 kW/2300 r/min, or 97 kW/2200 r/min Starting method: Electric starting Exhaust emission method: ternary purification, purification and noise reduction Throttle control: hydraulic throttle controllerTransmission systemTransmission model: USA DANA 32000 Series Integrated Drive axle model: USA DANA123 Tires: Inflatable tiresBraking systemBrake pump: P124ADUZA07 Displacement: 15.2ml/r Maximum pressure of braking system: 10.5 MPa Service braking: wet multi disc brake Brake valve model: GL810-244-069 Release pressure: 69 bar Parking brake: axle pack spring brakeSteering systemType: articulated hydraulic steering Steering pump: PB5100A331 Displacement: 52.7ml/r Maximum pressure of steering system: 16 MPa Steering gear: BZZ-E630 Single stability valve: FLD-F48WSteering cylinder diameter/rod diameter: φ 80/ φ 45 mmWorking SystemSystem voltage: 24V DC Starting motor voltage/power: 24 V/6 KW Lighting: 2 front headlights, 2 × 42W, 24V 2 rear headlights, 2 × 42W, 24V 2 front headlights, 2 × 18W, 24V 2 mining signal lights, 24 V 1 cab ceiling light, 24 VTank volumeHydraulic oil tank: 120 L Fuel tank: 120 L Transmission: 25 L Drive axle main transmission part: 17L × two Drive axle wheel reduction part: 3.5 L × four Engine lubricating oil: 7.7LTECHNICAL DRAWING AND DIMENSIONSCompany ProfileQINGDAO ZONGDA MACHINERY CO., LTD is a professional manufacture focusing on research and development, production, sale and service of underground mining machinery, a solution supplier and a mining project contractor in China with strong comprehensive strength and rich experience in mining industry.We have more than 30 professional and experienced mining experts and engineers and 200 staff for R&D, Production, QC, After Sales Technical Support and etc.We have fulfilled our commitment to turn knowledge into value by delivering a comprehensive range of integrated equipment and services that cost-effectively transform ore bodies into high grade mineral products for customers.Packaging & ShippingFAQ1. What mechanical products do you mainly produce? Are there any industry-specific orientations? A:We are producing underground mining vehicles and spare parts for metal mines.2. Can the technical parameters and specifications of the products be customized? What is the customization process? A: Yes. 3. Does the quotation include freight, tariffs, or insurance? How to choose trade terms (FOB, CIF, EXW, etc.)? A: Our quotations usually under CIF terms include Freight and Insurance but no Tariffs. 4. What is the production cycle for regular orders? Does expedited production support? A: 1 or 2 months usually. Yes and there are stock available sometime. 5. How is transportation arranged? Is door-to-door service provided? A: Our forwarder partner will arrange the proper transportation solution and can arrange the door-to-door service as well. 6. How to handle goods delay or damage? Is there a compensation policy? A: We have special and detailed warranty policy.7. Are customs clearance and customs declaration documents complete? Can you provide a Certificate of Origin (CO) or FORM E, etc.? A: Yes. 8. What payment methods are supported? A: TT Bank Transfer is preferred. 9. How long can production or delivery be arranged after payment? A: 1 to 2 months usually. 10. Do you accept Letters of Credit (L/C)? What are the requirements for L/C terms? A: Yes, but only LC at sight.11. If there is a quality problem, how to apply for after-sales service? Is technical support provided?A: We have both local and online technical after-salves service provided.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.