IPDB › China Industry › Manufacturing & Processing Machinery › Mining Machinery
10t Underground Truck Trackless Underground Mining Equipment Underground Mining Truck1
Mining Machinery, Underground Mining Truck, Underground Truck
QINGDAO ZONGDA MACHINERY CO., LTD
Preview:
Product DescriptionZDT210 Underground Mining Truck: Trackless transportation equipment.ZDT210 Underground Mining Truck mainly used in conjunction with scrapers in underground excavation and mining operations. Transporting ores and various materials can greatly improve operational efficiency and is an important equipment for achieving trackless mining.1.Technical Characteristics:Power System: The power system adopts a Deutz water-cooled low pollution engine;Power transmission system:The power transmission system adopts DANA gear transmission, spring brake hydraulic release drive axle, and mining resistant cutting tires;Braking system: The driving brake adopts a wet multi disc spring brake hydraulic release brake; MICO filling valve and brake valve; The parking brake adopts a spring brake on the drive axle for braking;Frame:The frame adopts a central hinged rotary structure to improve the adhesion performance of the entire machine;Steering system: The steering system is a hydraulic power steering system with dual sided steering cylinders;Rear dump truck:Convenient for dumping ores and materials.2.Safety warningSafety Gear: Operators must wear safety helmets, carry self-rescue devices, and use mining lamps when entering the well.Regular Maintenance: Regular inspections and prompt addressing of hidden dangers.No Maintenance During Operation: Strictly prohibited to conduct maintenance while the machine is running.Safety During Welding/Cutting: Confirm absence of flammable or explosive materials before maintenance.Exhaust Pipe Precautions: Avoid physical contact with the hot exhaust pipe.Hydraulic System Maintenance: Pressure must be relieved before starting any repairs.Application conditions for ZDT210 Underground Mining Truck1. Tunnel Specifications:Suitable for tunnels with a cross-sectional size of 3 meters (height) x3.5 meters (width) and above.Requires a firm top plate.Minimum turning radius of≥ 7.3 meters on the outside.Road slope should be ≤ 14°.Adequate ventilation and drainage in the workplace.2. Environmental Factors:Ambient temperature within the tunnel:-5C to 40°C.Maximum relative humidity (at 25°C): Not more than 85%.Altitude of usage location: Not exceeding 1000 meters.In high-altitude areas (above 1000 meters), power reduction is required for operation.3. Fuel Requirements:The sulfur content of the fuel used in this machine must not exceed 0.2%.4. Safety Precautions:Strictly prohibited in places with flammable and explosive gases (such as gas and coal dust).Technical parametersRated load capacity:10t (full load)Bucket capacity (stacking):5mMaximum driving speed front/reverse gear I:5.00± 0.5km/hFront/reverse gear II:10± 1 km/hFront/reverse gear III: 17± 1 km/hFront IV gear:22±1km/hVehicle lifting time:13secondsCar box descent time:10secondsMaximum climbing capacity (heavy load):25%Maximum traction force:140knTurning radius: Inner 4300±50 mmOuter 6950±50mmMaximum height of the machine during unloading:4265mmMaximum unloading angle:65°Steering angle:±40°Minimum ground clearance:310mmDimensions L x Wx H: 7575 (±200) mm x 1985 (±50) mm x2100mm(±50)Operating weight of the whole machine:12500±500 KGEngineEngine: Deutz BF6L914air-cooled engineRated power/rated speed:112 kW/2300 r/minMaximum output torque:550 N·m@1600 r/minStarting method: Electric startExhaust gas purification method: equipped with DOC+POC exhaust gas purification deviceThrottle control: Williams hydraulic throttle controllerTransmission systemTransmission model: DANA 32000 seriesTorque converter model: DANA 270 seriesDrive axle model:15TFinal drive ratio:5.286Wheel edge speed ratio:4.94Total speed ratio:26.11Tires:14.00-24 Inflatable Pattern TireBraking systemBrake pump displacement:16ml/rMaximum pressure of braking system: 16 MPaService brake: wet multi disc spring brakeParking brake: Spring Applied hydraulic release SAHR brakeSteering system (well-known domestic manufacturer)Type: Central articulated, hydraulic steeringSteering pump displacement: 50ml/rMaximum pressure of steering system: 14 MPaSteering gear:BZZ-1000 Steering cylinder diameter/rod diameter x number of cylinders: φ100/φ55 mm x 2Working System Working directional valve:SDS180/1Lifting cylinder diameter/rod diameter x number of cylinders: φ160/φ70mm x 2Maximum working system pressure: 16MPaElectrical systemSystem voltage: 24V DCStarting motor voltage/power:24V/6kWLighting: 4 front headlights, 2 x 48W, 24V rear headlights, 2 x 48W,24V 2 side headlights, 6 x 36W, 24V mining signal lights 2, 24V 1 cab overhead light, 24VFuel tank capacityHydraulic oil tank (not less than):130LFuel tank (not less than):160LTransmission:28LMain transmission part of drive axle:17L x2Drive axle wheel side deceleration part: 3.5Lx4 Engine lubricating oil: 28LTECHNICAL DRAWING AND DIMENSIONSCompany ProfileQINGDAO ZONGDA MACHINERY CO., LTD is a professional manufacture focusing on research and development, production, sale and service of underground mining machinery, a solution supplier and a mining project contractor in China with strong comprehensive strength and rich experience in mining industry.We have more than 30 professional and experienced mining experts and engineers and 200 staff for R&D, Production, QC, After Sales Technical Support and etc.We have fulfilled our commitment to turn knowledge into value by delivering a comprehensive range of integrated equipment and services that cost-effectively transform ore bodies into high grade mineral products for customers.Packaging & ShippingFAQ1. What mechanical products do you mainly produce? Are there any industry-specific orientations? A:We are producing underground mining vehicles and spare parts for metal mines.2. Can the technical parameters and specifications of the products be customized? What is the customization process? A: Yes. 3. Does the quotation include freight, tariffs, or insurance? How to choose trade terms (FOB, CIF, EXW, etc.)? A: Our quotations usually under CIF terms include Freight and Insurance but no Tariffs. 4. What is the production cycle for regular orders? Does expedited production support? A: 1 or 2 months usually. Yes and there are stock available sometime. 5. How is transportation arranged? Is door-to-door service provided? A: Our forwarder partner will arrange the proper transportation solution and can arrange the door-to-door service as well. 6. How to handle goods delay or damage? Is there a compensation policy? A: We have special and detailed warranty policy.7. Are customs clearance and customs declaration documents complete? Can you provide a Certificate of Origin (CO) or FORM E, etc.? A: Yes. 8. What payment methods are supported? A: TT Bank Transfer is preferred. 9. How long can production or delivery be arranged after payment? A: 1 to 2 months usually. 10. Do you accept Letters of Credit (L/C)? What are the requirements for L/C terms? A: Yes, but only LC at sight.11. If there is a quality problem, how to apply for after-sales service? Is technical support provided?A: We have both local and online technical after-salves service provided.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.