IPDB › China Industry › Manufacturing & Processing Machinery › Pipe Machine
CNC Two Rollers Plate Rolling Machine One-Step Rolling Two Rollers1
Pipe Machine, Rolling Machine, Plate Rolling Machine
Nantong Xintongwei Machine Tool Co., Ltd
Preview:
Product Description SpecificationUnitDescriptionMaximum Bending Thicknessmm6Maximum Rolling Widthmm300Bending YieldMPa245Rolling Speedm/min6Top Roller Diametermm/Bottom Roller Diametermm?300Main motor powerkw4KW Servo MotorDimensionm2500×800×1100Product DescriptionMain structureThe main structure of the equipment consists of an upper roller device, a lower roller, a main transmission device, a hydraulic system, a CNC system, left and right frames and a chassis.Upper roller deviceThe upper roller device consists of bearings, upper roller tipping bearings, etc. The upper roller is passive.Lower roller deviceThe lower roller device consists of a lower roller, a sliding seat, an SF-2 composite bearing, a lower roller cylinder, a reducer servo, etc. It is driven by the lower roller cylinder to move up and down, and rotates by fitting with the upper roller.Main transmission deviceThe main transmission device consists of a servo motor, a cycloidal pinwheel reducer, etc.The main transmission can be reversed to provide power for the rolling of the plate. The lower roller of the plate rolling machine is the active roller, and the upper roller is the passive roller.Frame, base/Рама, основаниеThe frame is a steel plate welded part, and the base is welded by channel steel and steel plate. The frame, reducer, motor and base are combined into one.Instructions for useThe upper and lower rollers of the machine are powered by a servo motor, while the feeding of the sheet and the rotation of the upper roller are driven by the friction between the sheet and the lower roller. The sheet is bent into an arc with different curvature radii by changing the relative position between the contact points of the two rollers and the metal plate.When operating, first confirm that the two rollers are in a parallel state, first raise the lower roller to the position, then place the sheet in the center relative to the roller axis (offset affects the accuracy of the plate rolling), then press the roller motor button, the motor rotation button (the direction of rotation is consistent with the feeding direction of the metal plate), so that the upper and lower rollers rotate, drive the sheet to feed, and make the workpiece reach the required shape and size.When unloading, lower the lower roller to the bottom, start the tipping cylinder, and after the tipping seat is tipped in place, the rolled workpiece is removed from the tipping side.If the operation button is turned to the automatic position, the machine tool will automatically complete the entire process of a roll as long as the start button is pressed.Installation InstructionsSafe OperationБезопасная эксплуатация(1)The use and operation of the machine must have corresponding safety operating procedures, and the operator must pay attention to personal and equipment safety;(2) Note: It is strictly forbidden to wear gloves when operating this machine;(3) Pay special attention to safety before and after loading and unloading materials to prevent the discharge of materials from injuring people and equipment;(4) If any abnormal situation is found during the operation of the machine: such as strange noises, impacts, abnormal vibrations, the machine should be stopped immediately for inspection and the cause should be eliminated;(5) The machine and its surroundings should be kept tidy, clean and hygienic;(6) The machine and equipment are not allowed to operate under damp or rainy conditions;(7) The equipment should have good grounding protection;Equipment installation and test run(1)When placing the machine, all points should be balanced and in the same plane to prevent deformation due to twisting of the base;(2) The machine must be installed on a solid foundation; adjust the base so that its axis is horizontal;(3) Lay out electrical wires and connect them correctly, and there should be a separate bus power switch;(4) Check the machinery and electrical system to ensure that they are in good condition, and adjust the lubrication points of each part;(5) After the test run is normal, check all parts again, adjust and tighten all components to keep them in good working condition.Packaging & ShippingCompany ProfileNANTONG XINTONGWEI MACHINE TOOL CO.,LTD Located in the eastern part of the Central Jiangsu Plain, "the hometown of Chinese shearing, folding and rolling machine tools" - Haian Libao. It is adjacent to the Yellow Sea in the east, the Yangtze River in the south, Xinchang Railway in the west, and close to the 204 and 328 national highways. The company was formerly known as "the original Haian County Haiwei Machine Tool Factory." Specializing in the production of "Tongwei" brand series of shearing machines, bending machines, rolling machines, leveling machines, slitting machines, uncoiling and leveling production lines and other sheet metal processing equipment .The company has a group of professionals who have been engaged in forging design for a long time. Through the strong alliance with various casting and forging research institutes and major technical research institutes, the product structure is continuously improved, and the application of new technologies is in a leading position in the same industry. , so that the performance of the whole machine reaches the international advanced level, and it is an ideal substitute for imported machine tools. In the past few years, the company has developed a number of new structures and new technologies, and applied for a number of patents. The products have passed the provincial and municipal quality and technical supervision and inspections for many times, and have won the honorary title of "Contract-honoring and Promise-keeping" enterprises. The company's products are widely used and sold throughout the country and exported to Southeast Asia, West Asia, Africa, and Russia in recent years. And other European countries, have a place in the European and American markets. The company adheres to the tenet of "Quality First. Service First. Reputation First", takes customer satisfaction as the operating principle, and insists on providing customers with thoughtful pre-sale, in-sale, and after-sale services.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.