IPDB › China Industry › Manufacturing & Processing Machinery › Packing Machinery
Multifunctional Packaging Machine with Color Mark Tracking1
Packing Machinery, Pillow Packing Machine, Multifunctional Packaging Machine
Zhengzhou Merson Machinery Co., Ltd
Preview:
Product DescriptionProduct DescriptionProduct CharacteristicsMain performance and structural features:1.Three servo control, electronic eye sensing product, bag length is set and cut immediately, saving time and film.2.Touch screen human-machine interface, parameter setting is convenient and fast.3.Fault self-diagnosis function, fault display is clear at a glance.4.High-sensitivity photoelectric eye color mark tracking makes the sealing and cutting position more accurate.5.Automatic rotation function, long and short compatibility, anti-empty bag leakage device.6.Positioning stop function, no sticking knife, no film consumption.7.The transmission system is simple, the work is more reliable, and the maintenance is more convenient.Product ParametersModelMS-350MS-450MS-600Flim widthMax.350mmMax.450mmMax.600mmBag seal typeBack sealPacking Speed25-120bag/minPower specifications220V,50/60HzIncision TypeToothed cut/flat cutBag making length65-190 or 120-280mm130-450mm120-450mmBag making width50-160mm50-200mm120-280mmProduct HeightMax.60mmMax:90mmMax.100mmPower2.6kw2.6kw3kwMachine size(L)4020×(W)745×(H)1450(L)4020×(W)820×(H)1450(L)4015×(W)1102.5×(H)1431Product DetailsProduct showWorkshop exhibitionFAQ1. Basic ConceptsQ: What is a top-feed pillow packaging machine?A: It refers to an automated device that unrolls and forms the packaging film from the top of the equipment (compared to the bottom-feed), and wraps the product into a "pillow-shaped" bag through steps such as bag making, filling, sealing and cutting. Typical applications: regular items such as biscuits, frozen foods, and daily chemicals.Q: What is the difference between top-feed vs. bottom-feed?A: Top-feed: The film roll is located above the equipment, saving floor space, suitable for lightweight films or small-sized products.Bottom-feed: The film roll is at the bottom, which is more stable and suitable for heavy films or large packages (such as boxed tissues).2. Use and debuggingQ: How to adjust the packaging length?A: Modify the parameters through the touch screen and adjust synchronously:The position of the color mark sensor (to ensure accurate alignment of the printed film).The phase of the cutter (matching the packaging length).Calibrate the number of servo motor pulses if necessary.Q: What should I do if the film deviates?A: Check according to the steps:Check whether the film roll is installed flat and whether the guide rollers are parallel.Adjust the automatic deviation correction device (if any), or manually fine-tune the guide rollers.Clean the photoelectric sensor (abnormal color mark detection will cause deviation).Q: Is the seal not firm or leaking?A: Possible reasons:Insufficient temperature → Increase the temperature of the heat sealing knife (PE film is usually 130~180℃).Uneven pressure → Adjust the cylinder pressure or replace the silicone strip.The film material does not match → Confirm that the film heat sealing layer (such as CPP) is compatible with the temperature.3.Maintenance and careQ: What daily maintenance needs to be done?A: Daily: Clean the heat sealing knife and guide roller, and check the oil level of the air line oil mist.Weekly: Lubricate the chain/guide rail and tighten the screws.Monthly: Check the tightness of the servo motor belt and clean the dust in the electric control box.Q: How to maintain the machine during long-term shutdown?A: Remove the remaining film roll to avoid deformation of the film.Apply anti-rust oil to the heat sealing knife.Disconnect the power supply and cover the dust cover.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.