IPDB › China Industry › Manufacturing & Processing Machinery › Petroleum Equipment & Machinery
P540 Od 6 5/8 Inch Non-Magnetic Heavy Weight Drill Pipe1
Petroleum Equipment Machinery, Heavy Weight Drill Pipe, API 5dp
Hunan Shunfu Metal Material Co., Ltd.
Preview:
Product Description Product DescriptionHeavy Weight Drill Pipe Integral Heavy Weight Drill PipesHeavy Weight Drill Pipes are machined from 31ft bars of AISI 4145H Mod. alloy steel,full-length quenched and tempered to obtain the API Spec. 7-1, NS-1 and Ds-1 mechanical properties.All Heavy Weight Drill pipe bars are trepanned and inside diameters are gauged to APISpec.7-1 specification with a 10 ft drifts mandrel Welded Heavy Weight Drill PipesWelded Heavy Weight Drill Pipes consists of two tool joints and one central tube, assembled by welding.Tool joints are made from AlS1 4145H Mod. alloy steel, quenched and tempered to obtain the AP1 Spec.7-1.NS-1 and Ds-1 mechanical properties. Central tube is made from 1340 normalized steel to achieve APISpec.7-1 NS-1 and DS-1 mechanical properties.Each weld zone is fully ultrasonic inspected and hardness tested. Spiral Heavy Weight Drill PipesHeavy Weight Drill Pipes are machined from 31ft bars of AISI 4145H Mod. Alloy steel full-length quenched and tempered to obtain the API Spec.7-1, NS-1 and Ds-1 mechanical properties. QUALITY CONTROLWhen delivered each HWDP has been inspected according to APISpec.7-1, NS-1 and Ds-1.An inspection certificate is provided including mechanical properties, chemical analysis and inspections.Each weld zone is fully ultrasonic inspected and hardness tested. CONNECTIONSAPl relieve groove pin and bore back box stress relief features are standard.Thread roots are cold-worked to improve fatigue resistance of the connection. All connections are phosphatized and coated with AP1thread compound to prevent corrosion and galling. Standard pressed steel protectors are installed to ensure adequate thread protection. On request, High Torque connections can be manufactured.Heavy Weight Drill Pipes can also be delivered blank ended. HARDBANDINGTo optimize wear resistance, Hardbanding is standard on tool joints and central upsetStandard wear bands:One 4" wear pad on pin and box, plus 1" pad on box taper section (optional Two 3" wear pads on central upsets (optional for Spiral HWDP).Standard hardbanding is raised (1/8" oversize).Flush application available on request (optional)Type of hardbanding is according to customer's requirements.We offer the main following hardbanding types:Fine grain size tungsten carbide particlesDuraband NC (Postle Industries)Tuffband NC (Postle Industries)Arnco 100XTArnco 300XTOther hardbanding types can be provided, on request. INTERNAL COATINGInternal coating can be provided on request.* Note: NS-1 and DS-1 properties and certification are provided on request.Please specify your needs in your enquiry. NominalSize ODinchesPipeBodyTube IDInchesPipeBodyElevatorUpsetinchesPipe BodyCentral UpsetinchesPipe BodyTorsionalStrength ft-lbsPipe Body TensileStrength lbsToolJointsODinchesToolJointsDinchesTool JointsConnectionsTool JointsRecommended Make-UpTorque ft-lbsToolJointsTorsionalStrengthft-lbsTensileStrengthlbsApproxWeightStandard lbsApproxWeightStandard KgApproxWeightSpirallbsApproxWeightSpiral KgPreferred Other3 1/22 1/163 7/84391576908004 3/42 1/16NC383 1/2 IF11500191708527407853569154153 1/22 1/163 7/843915769080052 1/16NC383 1/2 IF16700267008527408103679414273 1/22 1/43 7/84391576908004 3/42 1/4NC383 1/2 IF11500191708527407853569154153 1/22 1/43 7/843915769080052 1/4NC383 1/2 IF160702678085274081036794142742 1/24 3/164 1/2552728150005 1/42 1/2NC404 FH166002440072867091741610504764 1/22 3/44 11/1658140010961006 1/42 3/4NC464 IF2660039.8601052760126057213906304 1/22 13/164 11/1658019610660006 1/42 13/16NC464 IF2580038570102000012325591407638535 1/85 1/211290013820006 5/83NC504 1/2 IF34520524301278.200153569617327865 1/23 5/85 11/1661478140131610073 5/85 1/2FH 3774061.0001359200162773818388345 1/23 7/85 11/16613021113161557 1/43 7/85 1/2FH 36.000528171182515150968417277835 1/245 11/16612444612311127 1/445 1/2FH 33412485521089740142964816407446 5/846 15/167 1/82618402409570846 5/8FH 33.41248540108974025371151279512686 5/846 15/1671/826184024095708 1/446 5/8FH 334124854210897402577116928361286Non-Magnetic Heavy Weight Drill Pipe GradeCMn Cr MoNiN N2AMAGNIT 5010,05 max18,5 - 22 13 - 15 1 max2 max/ 0,25 - 0,50AMAGNIT 6010,05 max18 - 22 6,5 - 19,5 1 max2 max/ 0,45 - 0,80Magnadur 5010,04 max18,5 - 22 13 - 150,35 - 0,50,25 - 0,50,32 - 0,4/Magnadur 5090,05 max18 - 2017 - 190,9 - 1,22,5 - 3,50,5 - 0,6/Magnadur 6010,05 max18 - 2015,5 - 17,52,0 - 2,84,2 - 5,00,4 - 0,5/P6900,05 max3,00 - 8,0022,00 - 28,003,00 - 5,0014,00 - 18,00min, 0,40/P5300,05 max18,50 - 20,0013,00 - 14,000,40 - 0,60max, 2,000,25 - 0,40 P5400,05 max19,00 - 21,0017,00 - 19,500,30 - 0,800,80 - 2,00min, 0,50 P5500,06 max20,50 - 21,6018,30 - 20,00min, 0,50min, 1,40/min, 0,60P6500,06 max19,50 - 20,5018,00 - 19,001,70 - 2,003,00 - 4,50/0,55 - 0,65P650 HS0,06 max19,50 - 20,5018,00 - 19,001,70 - 2,003,00 - 4,50/0,55 - 0,65P7500,03 max1,50 - 3,0026,50 - 29,502,00 - 4,0028,00 - 31,50/min, 0,20P750 HS0,03 max1,50 - 3,0026,50 - 29,502,00 - 4,0028,00 - 31,50/min, 0,20N8500,01 max/20,00 - 22,0015,00 - 18,00remainder//W2014N0,04 max19 - 2213 - 15 1 max2,5 max0,20~0,35/W1813N0,05 max17,5 - 20,013 - 150,3 - 0,5≤0,600,25~0,40/TWZ - 20,04 max17,5 - 23,516,0 - 18,50,4 - 0,8≥0,50≥0,48/TWZ - 30,04 max18 - 2116 - 180,4 - 0,80,5 - 1,50,5 - 0,8/PNM530 0,04 max17,5 - 23,516,0 - 18,50,4 - 0,8≥0,50≥0,48/TNMS5010,04 max19 - 2112,5 - 14,00,3 - 0,50,25 - 0,450,28 - 0,50/ Detailed Photos
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.