IPDB › China Industry › Manufacturing & Processing Machinery › Petroleum Equipment & Machinery
Oilfield Tool Oilfield Downhole Tool Anti Particle Sedimentation Pump Downhole Sucker Rod Pump for Petroleum Equipment/Downhole Pump/Oil Well Pump/Oilfield Pump1
Petroleum Equipment Machinery, Downhole Tools, Anti Particle Sedimentation Pump
Puyang Chensheng Petroleum Technology Co., Ltd.
Preview:
Product Description Anti particle sedimentation pump Our company has developed a series of anti particle sedimentation pumps to address the problems of oil wells with high sand and other impurities in the well fluid, where impurities deposit on the valve seat, causing premature failure of the oil pump, shortening the maintenance free period of the oil well, and greatly increasing the cost of oil recovery. This pump can effectively prevent impurities from depositing on the valve seat, ensuring the reliability of the valve ball sealing, thereby improving the pumping efficiency and extending the pump inspection cycle.Structure and principle: The pump is composed of a drain body, a fixed valve, and an isolation sleeve at the lower end, which are connected by threads. An isolation sleeve is connected to the upper end of the fixed valve, and an oil outlet hole is opened on the upper side of the isolation sleeve. The top of the isolation sleeve is threaded with a solid separation umbrella. The pump utilizes an isolation sleeve and separation umbrella installed on a fixed valve to allow various impurities to deposit between the housing and the isolation sleeve through the oil outlet of the isolation sleeve, avoiding their deposition at the valve seat and ensuring the reliability of the valve ball seal, thereby extending the service life of the pump. At the same time, the pump is made of anti-corrosion and wear-resistant materials, with a chrome plated surface, which gives the pump significant advantages such as anti sand jamming, corrosion resistance, and long service life. Technical performance table: Sealing grade requirement (MPa)30~35Maximum allowable tensile load (kN)500The hollow pin of the oil drain can withstand the maximum load (kN)1.0Success rate of hollow pin fracture in oil drain device (%)100Maximum particle diameter of sedimentation chamber (mm)20 SpecificationsNominal diameter(mm)Stroke (m)Plunger length (m)Outer diameter of connecting oil pipe (mm)Pump constant (m3/d)Diameter of connecting rod (mm)25-125TH31.750.6 ~ 9.01.273.01.1401925-150TH38.100.6 ~ 9.01.273.01.6421925-175TH44.450.6 ~ 9.01.273.02.2351925-225TH57.150.6 ~ 9.01.273.03.69119
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.