IPDB › China Industry › Manufacturing & Processing Machinery › Pneumatic Tools
TCA-7 Pneumatic Pick /OEM /in Factory Price1
Pneumatic Tools, Pneumatic Air Pick, Pick and Place Pneumatic
Fuzhou Golden Moral Imp & Exp Co., Ltd.
Preview:
Product Description TCA-7 Pneumatic PickInstructionTCA-7 Pneumatic Pick has light-weight, simple structure, operate facility, auto stop when bump objective into pieces. It is suitable for drilling in mine, mining the soft ore; diging pole and feet-hole, karating water-ditch; or crashing concrete and clay in construction work; or working in the situation that need producing the impact in the mechanical industry such as assemble and unassemble the cincture pin in tractor, panzer and so on. SpecificationExterior Dimension (L×W×H) 456×160×110mmWeigh 7.2kgRammar dia 35mmRammar stroke 120mmRammar weigh 0.6kgWork air pressure0.4~0.49MpaImpact energy(0.49Mpa) ≥30JImpact frequency(0.49Mpa) ≥21.6HzAir consumption(0.49Mpa) ≤20L/SAir pipe inner dia 19mmMaintenanceUse And Notice1. Machine should feed the rustproof oil before leave factory, it should dismantle for cleaning when use, reassembling copulate exterior should smear lubrication, and test run.2. Make sure blow off the sundries within the pipe, when connecting air pipe.3. Check carefully before aerate, if the air pipe route and connector was damage, each connect parts was reliable and safe.Fill lubrication before opening machine, you should oil machine every two or three hours for use continuously.Don't use low-fire point and easy to pyrophoric lubricating oil, when use in the locale which has the super gas.Operating, should pay attention to interrupting the drill suddenly.The machine that use continuously should maintain termly, clean the dirty within machine, replace the mar and invalidation parts, eliminate accident hidden trouble.8.If the used machine need store for a long time, should dismantle, eliminate the oil and keep in the shady, cool and dry place.Pneumatic Pick Operation 1-Ensure that drill positioned correctly.2-Keep up your body balance and your feet leaving the drill.3-Machine must tighten peak the crashing object,it need enough thrust to gain nice efficiency.4-Abide local code and safety rules.Air pipe and pressure1-Air-pipe inner dia is 19mm,the length is ≤ 15m, the steel tube dia should be large enough between air compressor and pipe. 2-The air pressure is at 0.4~0.49Mpa. Air pressure is too high to destroy drill and spare parts and air pressure is too low to debase the work efficiency. Lubrication The principia to select lubrication is that the viscosity of the used oil should be high in high temperature locale; the viscosity of the used oil should be low in low temperature locale. See the list below to use the lubrication.Ambient temperatureNameNo10~30oCMachine oilN46-10~10oCMachine oilN22-30~-10oCRefrigerator oilHD-13
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.